| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix reversed sequence option serialization
hton_seq() expects the host-order source first and the unaligned
network-order destination second. The version 1 sync sender passes these
arguments in reverse for both sequence blocks. This leaves 24 bytes of the
kmalloc-backed message unwritten. It may disclose stale heap data and
replace the live connection sequence state with values read from the
buffer.
Pass the connection sequence state as the source and the message payload as
the destination for both blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace()
sip_skip_whitespace() returns dptr unchanged when its own loop
exhausts the buffer (dptr == limit), instead of NULL like its sibling
sip_follow_continuation() returns on its own "no more data" path.
ct_sip_get_header() only checks for NULL after calling it:
dptr = sip_skip_whitespace(dptr, limit);
if (dptr == NULL)
break;
if (*dptr != ':' || ++dptr >= limit)
break;
so a recognized header name followed only by spaces/tabs running to
the exact end of the SIP payload, with no colon, makes the very next
statement read one byte past the buffer.
Make both "no more data" outcomes return NULL, matching the
convention sip_follow_continuation() already uses and that both
existing callers already check for. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity
rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry
array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows
entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info
buffer, and programs the real tile_cols / tile_rows into the hardware.
The tile group entry control is a dynamic array sized to the number of
entries userspace submitted, independent of tile_cols / tile_rows, so a
frame that claims more tiles than entries reads past the array. A frame
that claims more than AV1_MAX_TILES tiles also leaves the hardware
programmed for more tiles than the descriptor buffer holds.
Reject both in prepare_run(): tile_cols * tile_rows must not exceed the
submitted entry count or AV1_MAX_TILES. The entry count is read via
v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1
decoder already enforces. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: reject beacons with bad HE operation
The HE operation element not only needs to be longer than
the fixed part, but also have an appropriate size for the
variable part inside of it. Check this. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: filter RDS_INFO_* getsockopt by caller's netns
The RDS_INFO_* family of getsockopt(2) options reads several
file-scope global lists that are not per-netns:
rds_sock_info / rds6_sock_info,
rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list
rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list
rds_conn_info / rds6_conn_info,
rds_conn_message_info_cmn (for the *_SEND_MESSAGES and
*_RETRANS_MESSAGES variants),
rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS)
-> rds_conn_hash[]
The handlers do not filter by the caller's network namespace.
rds_info_getsockopt() has no netns or capable() check, and
rds_create() has no capable() check, so AF_RDS is reachable from
an unprivileged user namespace. As a result, an unprivileged
caller in a fresh user_ns plus netns can read the bound address
and sock inode of every RDS socket on the host, the peer address
of incoming messages on every RDS socket on the host, the peer
address and TCP sequence numbers of every rds-tcp connection on
the host, and the peer address and RDS sequence numbers of every
RDS connection on the host.
The rds-tcp transport is reachable from a non-initial netns (see
rds_set_transport()), so a one-shot init_net gate at
rds_info_getsockopt() would deny legitimate per-netns visibility
to rds-tcp callers. Instead, filter at each handler by comparing
the netns of the caller's socket to the netns of the list entry,
or to rds_conn_net(conn) for connection paths. Only copy entries
whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are
aggregate statistics and remain global.
Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket
binds 127.0.0.1:4242 in init_net as root. A child process enters
a fresh user_ns plus netns and opens AF_RDS there, then calls
getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the
child sees the init_net socket. After this change, the child
sees zero entries.
Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count
globals. v2 used them for the size precheck and lens->nr; v3
replaced the precheck with a per-ns count from a first pass over
the list, so the globals have no remaining readers. The matching
increments and decrements in rds_create()/rds_destroy_sock() and
rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with
them. Reported by the kernel test robot under clang W=1. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: validate byte_count in acpi_ps_get_next_package_length()
Validate package length reading in acpi_ps_get_next_package_length(). |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: validate handler object type in two places
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler(). |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate index entry key bounds
[BUG]
A malformed NTFS directory index entry can advertise a key_size larger
than the bytes actually present in its NTFS_DE payload. Directory lookup
then passes that malformed key to cmp_fnames(), which can read past the
end of the kmalloc'ed index buffer.
BUG: KASAN: slab-out-of-bounds in fname_full_size fs/ntfs3/ntfs.h:590 [inline]
BUG: KASAN: slab-out-of-bounds in cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46
Read of size 1 at addr ffff88801c313018 by task syz.6.3365/9279
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
__asan_report_load1_noabort+0x14/0x30 mm/kasan/report_generic.c:378
fname_full_size fs/ntfs3/ntfs.h:590 [inline]
cmp_fnames+0x1ea/0x230 fs/ntfs3/index.c:46
hdr_find_e.isra.0+0x3ed/0x670 fs/ntfs3/index.c:762
indx_find+0x4b5/0x900 fs/ntfs3/index.c:1186
dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254
ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85
__lookup_slow+0x241/0x450 fs/namei.c:1816
lookup_slow fs/namei.c:1833 [inline]
walk_component+0x31c/0x570 fs/namei.c:2151
link_path_walk+0x592/0xd60 fs/namei.c:2519
path_lookupat+0x138/0x660 fs/namei.c:2675
filename_lookup+0x1f3/0x560 fs/namei.c:2705
filename_setxattr+0xad/0x1c0 fs/xattr.c:660
path_setxattrat+0x1d8/0x280 fs/xattr.c:713
__do_sys_lsetxattr fs/xattr.c:754 [inline]
__se_sys_lsetxattr fs/xattr.c:750 [inline]
__x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750
...
Allocated by task 9279:
kasan_save_stack+0x39/0x70 mm/kasan/common.c:56
kasan_save_track+0x14/0x40 mm/kasan/common.c:77
kasan_save_alloc_info+0x37/0x60 mm/kasan/generic.c:573
poison_kmalloc_redzone mm/kasan/common.c:400 [inline]
__kasan_kmalloc+0xc3/0xd0 mm/kasan/common.c:417
kasan_kmalloc include/linux/kasan.h:262 [inline]
__do_kmalloc_node mm/slub.c:5650 [inline]
__kmalloc_noprof+0x2bd/0x900 mm/slub.c:5662
kmalloc_noprof include/linux/slab.h:961 [inline]
indx_read+0x41d/0xad0 fs/ntfs3/index.c:1059
indx_find+0x447/0x900 fs/ntfs3/index.c:1179
dir_search_u+0x2c0/0x460 fs/ntfs3/dir.c:254
ntfs_lookup+0x1cc/0x2a0 fs/ntfs3/namei.c:85
__lookup_slow+0x241/0x450 fs/namei.c:1816
lookup_slow fs/namei.c:1833 [inline]
walk_component+0x31c/0x570 fs/namei.c:2151
link_path_walk+0x592/0xd60 fs/namei.c:2519
path_lookupat+0x138/0x660 fs/namei.c:2675
filename_lookup+0x1f3/0x560 fs/namei.c:2705
filename_setxattr+0xad/0x1c0 fs/xattr.c:660
path_setxattrat+0x1d8/0x280 fs/xattr.c:713
__do_sys_lsetxattr fs/xattr.c:754 [inline]
__se_sys_lsetxattr fs/xattr.c:750 [inline]
__x64_sys_lsetxattr+0xd0/0x150 fs/xattr.c:750
...
[CAUSE]
The index-header validators only validated INDEX_HDR-level geometry.
They did not walk each NTFS_DE to verify entry alignment, subnode
layout, or that key_size fit inside the entry payload. They also
allowed a last sentinel entry to carry a non-zero key_size.
[FIX]
Walk every NTFS_DE in ntfs3's index-header validators and reject
entries with invalid layout, mismatched subnode state, oversized
key_size, or non-zero sentinel keys before lookup or log replay can
consume them. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF
ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed
by the subvolume name. Several readers assume that this layout is already
valid and then use the on-disk name length directly. A corrupted item can
therefore make those readers address bytes outside the item, and
BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI
name buffer.
Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader
uses them. Reject records that do not contain a non-empty name, whose
name_len does not exactly describe the remaining item payload, or whose
name exceeds BTRFS_NAME_LEN.
For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len
instead of deriving the copy length from the item size. The ioctl result is
zeroed when allocated. That leaves the existing trailing zero byte
untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame
rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences
hdr->addr and hdr->ctrl without validating skb->len first. A truncated
frame with skb->len less than the minimum header size causes an
out-of-bounds read of uninitialized memory. Additionally, a zero-length
frame causes skb->len-- to underflow to UINT_MAX, making
skb_tail_pointer() read far past the buffer.
Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC
handlers") fixed the same class of missing-length-check bugs in the MCC
sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed.
KMSAN reports:
BUG: KMSAN: uninit-value in rfcomm_run
...
Uninit was created at:
__alloc_skb+0x474/0xb60
vhci_write+0xe9/0x870
Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1
(the minimum frame must have a 3-byte header and a 1-byte FCS). |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Do not treat master device as a duplicate target
i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C
device with the same PID as the reference device. The search can match
master->this, causing the controller itself to be returned as a
duplicate.
Since the controller is not a target device, it cannot be a duplicate of
one. Exclude master->this from matching so that the function only
returns real duplicate target devices. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: skip the zoned limits update if the zone info query failed
nvme_query_zone_info() returns either a negative errno or a positive
NVMe status code, but nvme_update_ns_info_block() only tests for the
negative case:
ret = nvme_query_zone_info(ns, lbaf, &zi);
if (ret < 0)
goto out;
If the device fails the Identify Namespace (I/O Command Set specific)
command, or the Identify Controller command issued by
nvme_set_max_append(), the positive status falls through and setup
continues with the zero-initialized zone info. nvme_update_zone_info()
then marks the queue zoned with chunk_sectors and ns->head->zsze set to
zero.
blk_validate_zoned_limits() does not check chunk_sectors, so the limits
commit succeeds. blk_revalidate_disk_zones() does reject the zero zone
size, but by then the limits are live and nothing rolls them back, so
I/O keeps being submitted to a zoned queue with a zero zone size and
disk_zone_no() shifts by ilog2(0):
nvme0n1: Invalid non power of two zone size (0)
UBSAN: shift-out-of-bounds in include/linux/blkdev.h:747:16
shift exponent -1 is negative
disk_zone_no include/linux/blkdev.h:747 [inline]
bio_straddles_zones include/linux/blkdev.h:1058 [inline]
blk_zone_wplug_handle_write block/blk-zoned.c:1423 [inline]
blk_zone_plug_bio.cold+0x25/0x1c8 block/blk-zoned.c:1605
blk_mq_submit_bio+0x18fb/0x2870 block/blk-mq.c:3196
submit_bh_wbc+0x575/0x740 fs/buffer.c:2824
__block_write_full_folio+0x728/0xdd0 fs/buffer.c:1933
Any device, firmware or NVMe-oF target that fails this one command
reaches this.
Skip the zoned limits update in that case, and log which of the two
things happened: during a revalidation the queue keeps the zone
geometry it was last validated with, and on a first scan the namespace
is registered without zoned limits, so that it is still available as a
handle for admin commands. Neither of the paths in
nvme_query_zone_info() that return a positive status logs anything, so
the failure would otherwise be silent.
zi.zone_size is an exact indicator: every path that returns a positive
status returns before it is assigned, and after that the only failure
left is -ENODEV, which the caller already handles.
Found by FuzzNvme. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak
qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response
buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full
sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound
sg_copy_to_buffer() only fills as many bytes as the user request payload
provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The
options and unused[] fields are therefore copied out uninitialized,
leaking kernel heap contents to user space.
Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2(). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: virtio - bound the akcipher result length
virtio_crypto_dataq_akcipher_callback() sets the result length from the
device-reported response length without bounding it to the destination
buffer, which was allocated for the original request length.
sg_copy_from_buffer() then reads that many bytes from the destination
buffer; a backend reporting a larger length over-reads adjacent kernel
heap into the caller's scatterlist (an out-of-bounds read).
Clamp the reported length to the originally requested destination length.
A conforming device reports no more than that, so valid results are
unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use memcmp() to compare ClientGUIDs
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check v2_ext_offset/eid_cnt/ism_gid_cnt when receiving proposal msg
When receiving proposal msg in server, the fields v2_ext_offset/
eid_cnt/ism_gid_cnt in proposal msg are from the remote client
and can not be fully trusted. Especially the field v2_ext_offset,
once exceed the max value, there has the chance to access wrong
address, and crash may happen.
This patch checks the fields v2_ext_offset/eid_cnt/ism_gid_cnt
before using them. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: check smcd_v2_ext_offset when receiving proposal msg
When receiving proposal msg in server, the field smcd_v2_ext_offset in
proposal msg is from the remote client and can not be fully trusted.
Once the value of smcd_v2_ext_offset exceed the max value, there has
the chance to access wrong address, and crash may happen.
This patch checks the value of smcd_v2_ext_offset before using it. |
| In Bouncy Castle for Java before 1.86, HQC leaked secret-derived data through two side channels: its GF(2^8) arithmetic used lookup tables indexed by field elements, making the cache line touched a function of the operand, and its fixed-weight support sampler left its duplicate scan as soon as a collision was found and stored accepted positions at a secret index. Both run on secret inputs during encapsulation and decapsulation, and the sampler re-expands the secret key from its seed on every decapsulation, so an attacker able to observe cache behaviour or decapsulation timing can recover information about the HQC private key. The field arithmetic is now table-free and the sampler branch-free within a batch of candidates, with output and randomness consumption unchanged. |
| The Unlimited Elements for Elementor WordPress plugin before 2.0.21 does not correctly handle a search value before rewriting an already prepared SQL statement, allowing unauthenticated users to perform SQL injection attacks and to retrieve non-public content, when a related widget option is set away from its default. |
