| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix target device refcount leak in mpi3mr_sas_port_add()
mpi3mr_get_tgtdev_by_addr() increments the target device kref when it
returns a device. If a subsequent error triggers a goto out_fail after
the tgtdev reference is acquired, the reference is never released
because the out_fail path does not call mpi3mr_tgtdev_put(). This
prevents the target device structure from ever being freed.
Add a tgtdev put in the out_fail path, guarded by a NULL check since
tgtdev is only acquired for SAS_END_DEVICE types and the same cleanup
path is shared by earlier error cases where tgtdev is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix the possible bioc_list memory leak during error
There are two possible ways to leak bioc memory on
btrfs_ordered_extent::bioc_list:
- An error occurred for btrfs_insert_one_raid_extent()
Then the function btrfs_insert_raid_extent() immediately return
without freeing any bioc in the bioc_list.
- An ordered extent hit an IO error
In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and
skip the call on btrfs_insert_raid_extent() completely.
Fix the problem by:
- Introduce a new helper, btrfs_cleanup_ordered_bioc_list()
Which will remove all bioc from the bioc_list, and release the bioc.
- Call the above helper for btrfs_insert_raid_extent()
So that the cleanup helper is always called no matter what.
- Call the above helper for btrfs_finish_one_ordered()
This is called just before the final release on the ordered extent.
This was reported by Sashiko when reviewing another patch. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the field rejected for a bad modifier
Writing a hist trigger whose value or variable carries a modifier that is
not allowed there leaks the fields that were built for it.
__create_val_field() takes the field from parse_expr() and stores it in
hist_data->fields[] only after the modifier checks have run:
hist_field = parse_expr(hist_data, file, field_str, flags, var_name,
&n_subexprs);
...
if (hist_field->flags & HIST_FIELD_FL_VAR) {
if (hist_field->flags & (...))
goto err;
} else {
if (hist_field->flags & (...))
goto err;
}
hist_data->fields[val_idx] = hist_field;
Both checks jump past that store, and the err label returns without
freeing anything. The error unwinds to create_hist_data(), which calls
destroy_hist_data() -> destroy_hist_fields(), and that reaches a field
only by walking fields[]. A field that never got there is unreachable.
commit e0213434fe3e ("tracing: Do not let histogram values have some
modifiers") set ret to -EINVAL and fell through to the store, which left
the field owned by fields[] and freed along with the rest of hist_data.
Splitting the check into a value case and a variable case replaced that
fall-through with a goto that skips it.
With CONFIG_DEBUG_KMEMLEAK, 200 writes of
# echo 'hist:keys=prev_pid:vals=next_pid.log2' > \
events/sched/sched_switch/trigger
each correctly rejected with -EINVAL, leave 332 unreferenced objects
(63744 bytes) reported at create_hist_field(); 200 install and remove
cycles of a valid trigger leave none. A '.log2' field is two
allocations, since create_hist_field() puts the plain field in
operands[0] of the log2 field, and both are reported.
Use destroy_hist_field() rather than __destroy_hist_field() so that
operands[0] is freed as well. It returns early for HIST_FIELD_FL_VAR_REF,
which is what an operand owned by hist_data->var_refs[] needs; the
rejected field itself is never a var ref, because a var ref never carries
a modifier flag. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix kernel crash during resume
Currently during resume, QMI target memory is not properly handled, resulting
in kernel crash in case DMA remap is not supported:
BUG: Bad page state in process kworker/u16:54 pfn:36e80
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80
page dumped because: nonzero _refcount
Call Trace:
bad_page
free_page_is_bad_report
__free_pages_ok
__free_pages
dma_direct_free
dma_free_attrs
ath12k_qmi_free_target_mem_chunk
ath12k_qmi_msg_mem_request_cb
The reason is:
Once ath12k module is loaded, firmware sends memory request to host. In case
DMA remap not supported, ath12k refuses the first request due to failure in
allocating with large segment size:
ath12k_pci 0000:04:00.0: qmi firmware request memory request
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144
ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size
ath12k_pci 0000:04:00.0: qmi delays mem_request 2
ath12k_pci 0000:04:00.0: qmi firmware request memory request
Later firmware comes back with more but small segments and allocation
succeeds:
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288
ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536
ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288
Now ath12k is working. If suspend is triggered, firmware will be reloaded
during resume. As same as before, firmware requests two large segments at
first. In ath12k_qmi_msg_mem_request_cb() segment count and size are
assigned:
ab->qmi.mem_seg_count == 2
ab->qmi.target_mem[0].size == 7077888
ab->qmi.target_mem[1].size == 8454144
Then allocation failed like before and ath12k_qmi_free_target_mem_chunk()
is called to free all allocated segments. Note the first segment is skipped
because its v.addr is cleared due to allocation failure:
chunk->v.addr = dma_alloc_coherent()
Also note that this leaks that segment because it has not been freed.
While freeing the second segment, a size of 8454144 is passed to
dma_free_coherent(). However remember that this segment is allocated at
the first time firmware is loaded, before suspend. So its real size is
524288, much smaller than 8454144. As a result kernel found we are freeing
some memory which is in use and thus cras
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: delete timer and free skb queue when unloading
Fix possible crash and memory leak on driver unload by deleting
TX purge timer and freeing C2H queue in 'rtw_core_deinit()',
shrink critical section in the latter by freeing COEX queue
out of TX report lock scope. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/habanalabs: postpone mem_mgr IDR destruction to hpriv_release()
The memory manager IDR is currently destroyed when user releases the
file descriptor.
However, at this point the user context might be still held, and memory
buffers might be still in use.
Later on, calls to release those buffers will fail due to not finding
their handles in the IDR, leading to a memory leak.
To avoid this leak, split the IDR destruction from the memory manager
fini, and postpone it to hpriv_release() when there is no user context
and no buffers are used. |
| Multidict is an implementation of a multidict data structure. From 6.7.0 until 6.9.1, the C extension's items-view reflected union operation, operand | d.items(), in multidict_itemsview_or2_impl and subtraction operation, d.items() - operand, in multidict_itemsview_sub1_impl fail to release new key-identity and value references returned for each operand element. Applications that perform these operations over attacker-influenced sequences can leak two strong references per element, and garbage collection cannot reclaim them, so repeated operations can cause unbounded process memory growth and denial of service. Forward union, intersection, non-tuple operand elements, and pure-Python builds are not affected by this reference leak. This issue is fixed in version 6.9.1. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/server: fix tree connection leak in smb2_tree_connect()
See the procedure below:
smb2_tree_connect
ksmbd_tree_conn_connect
xa_store(&sess->tree_conns, tree_conn->id, tree_conn)
ksmbd_counter_inc(KSMBD_COUNTER_TREE_CONNS)
ksmbd_share_tree_conn_inc(sc)
ksmbd_iov_pin_rsp // fail
status.ret = KSMBD_TREE_CONN_STATUS_NOMEM
// do not disconnect tree_conn
Disconnect the new tree connection if ksmbd_iov_pin_rsp() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix xmit_frame/xmit_buf leaks on mgnt-frame error paths
issue_beacon(), issue_probersp() and issue_asocrsp() obtain a management
xmit_frame together with its xmit_buf from the driver's fixed-size
management-TX pools via alloc_mgtxmitframe(). On the normal path the frame
is handed to dump_mgntframe(), which transfers ownership and eventually
returns both objects to their pools (the frame and, for beacons, the buf
in rtl8723bs_mgnt_xmit(); other bufs via the pending-xmitbuf/TX-completion
path).
Several error/edge paths return early after a successful
alloc_mgtxmitframe() but before dump_mgntframe(), so ownership is never
transferred and neither object is freed:
- issue_beacon(): beacon larger than 512 bytes
- issue_probersp(): cur_network->ie_length > MAX_IE_SZ
- issue_probersp(): kzalloc() of the SSID scratch buffer fails
- issue_asocrsp(): pkt_type is neither ASSOCRSP nor REASSOCRSP
Because alloc_mgtxmitframe() removes the frame and buf from their free
lists (list_del_init) without placing them on any pending list, an
orphaned pair is on no list and referenced by nobody, so it is only
reclaimed at driver teardown. Repeated hits progressively exhaust the
management-TX pools until alloc_mgtxmitframe() returns NULL and the
interface can no longer send beacons or probe/assoc responses.
Free the frame and buffer on these paths, matching the existing correct
error handling in issue_assocreq(). |
| Missing release of memory after effective lifetime vulnerability in Apache Thrift c++ bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Missing release of memory after effective lifetime, Missing release of resource after effective lifetime vulnerability in Apache Thrift THeaderTransport.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| Apache Traffic Server leaks memory when handling HostDB SRV records.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.14, from 10.0.0 through 10.1.3.
Users are recommended to upgrade to version 9.2.15 or 10.1.4, which fix the issue. |
| The NetX Duo MQTT client leaks the packet carrying a malformed PUBLISH message. Each malformed PUBLISH costs one packet, or one chain of packets, from the network driver's receive pool, and nothing returns it. A peer that can deliver a few dozen such messages exhausts the pool and stops all inbound network traffic on the device until it is rebooted. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user could cause a memory leak in error paths leading to kernel memory exhaustion. A successful exploit of this vulnerability might lead to denial of service. |
| IEEE C37.118 Synchrophasor protocol dissector memory leak in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| An unauthenticated client can drain the RTSP server's packet pool with a couple of dozen requests
that carry a Session header the parser cannot convert.
The Session branch returns the raw NetX error code instead of an RTSP status code:
```c
/* addons/rtsp/nx_rtsp_server.c:2754 */
status = _nx_utility_string_to_uint(field_value_ptr, field_value_length, &session_id);
if (status)
{
return(status); /* NX_INVALID_PARAMETERS / NX_SIZE_ERROR / NX_OVERFLOW */
}
```
Every other branch of the same function maps its failure to an RTSP status first. The CSeq branch
eighteen lines earlier does exactly that (line 2736 returns NX_RTSP_STATUS_CODE_BAD_REQUEST). The
raw code then reaches `_nx_rtsp_server_error_response_send` (nx_rtsp_server.c:1234), which does not
recognise it, takes a path that returns without releasing the response packet it already allocated,
and the block never goes back to the pool.
Six requests with an empty Session header against a 22 packet pool:
```
valid requests: after request 6: pool available = 21, AFTER = 22 / 22
malformed requests: after request 6: pool available = 16, AFTER = 17 / 22
```
One block per request, not returned when the client disconnects. Twenty six requests take the pool
to zero and the server starts failing allocations, after which it serves nobody. If the pool is
shared with the rest of the application, as it is in the shipped sample, the rest of the stack
stops with it.
Convert the `_nx_utility_string_to_uint` failure in the Session branch into
NX_RTSP_STATUS_CODE_BAD_REQUEST the way the CSeq branch does, and release the response packet on
every exit path of `_nx_rtsp_server_error_response_send`. |
| Net::IDN::Punycode versions from 2.302 before 2.590 for Perl leak the output buffer on every rejected label in decode_punycode.
The XS backend allocates the scalar it returns before it validates the input, sizing the buffer at twice the input length. The scalar is released only on the success path, so each of the three croaks that reject a label leaves the scalar and its buffer allocated. Nothing bounds the label length in the to-Unicode direction, since the 63-byte DNS limit is checked only when converting to ASCII.
Only the XS backend is affected.
A sender who supplies invalid labels grows the process by twice the label length per rejected call, with no successful call needed. |
| In Wind River VxWorks 7 prior to 26.09, specific system call arguments can result in the process management subsystem failing to properly release allocated kernel memory before terminating the calling application. Fixed in Version 26.09 |
