| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Loco Translate WordPress plugin before 2.8.9 does not sanitise and escape some bundle configuration values before outputting them back in an admin page, allowing users with the translator capability and above to perform Stored Cross-Site Scripting attacks against high privilege users such as administrators. |
| OpenAM before 16.1.3 contains a server-side request forgery vulnerability that allows attackers able to register or modify OAuth 2.0 clients to make OpenAM fetch internal resources via an unvalidated jwks_uri. Attackers can trigger unauthenticated fetches through client-authentication and ID-token validation to probe internal hosts, metadata endpoints or local files, or exhaust request threads for denial of service. |
| OpenAM before 16.1.3 contains an improper authorization vulnerability that allows delegated administrators to destroy sessions outside their realms because realm checks use the requester's realm. Authenticated accounts holding the iplanet-am-session-destroy-sessions attribute can supply a target session identifier or handle to forcibly log out users in any realm. |
| OpenAM before 16.1.3 contains an authorization bypass vulnerability in the sessions REST endpoint query operation that allows realm administrators to list sessions of every realm. Attackers holding delegated RealmAdmin privileges can supply a _queryFilter naming another realm to disclose usernames, universal IDs, and session handles across tenant boundaries. |
| OpenAM before 16.1.3 applies its OAuth2 Provider PKCE enforcement only to authorization requests whose response_type is exactly code, so codes issued through OpenID Connect hybrid flows (code token, code id_token, code token id_token) carry no bound challenge. An attacker who intercepts such a code can redeem it for a public client's tokens with any non-empty code_verifier. |
| OpenAM before 16.1.3 contains an open redirect vulnerability that allows unauthenticated attackers to redirect users by supplying an unverified id_token_hint to the /oauth2/connect/endSession endpoint. Attackers can name any realm client in a forged hint to redirect victims to any registered post-logout URI, enabling phishing that borrows the OpenAM host's trust. |
| OpenAM before 16.1.3 contains an email content injection vulnerability that allows unauthenticated attackers to control notification email wording via the forgotPassword and register actions on /json/{realm}/users. Attackers can supply subject and message fields to send phishing mail from the organisation's configured From address, or abuse register as a relay to arbitrary recipients. |
| OpenAM before 16.1.3 contains a latent cross-site scripting defect that places the SAML message, relay state and target URL unencoded into the load-balancer cookie bounce auto-submit page. If reachable with cookieHashRedirectEnabled set, crafted requests could execute script in the OpenAM origin, though an unrelated HTTP 500 failure prevents exploitation in released versions. |
| OpenAM before 16.1.3 contains an unauthenticated arbitrary class instantiation vulnerability in the legacy JAX-RPC SOAP interface that allows remote attackers to load classes without authentication. Attackers can send SOAP requests to /jaxrpc/* with an unverified session identifier and a chosen class name, crashing the server, probing the classpath, or potentially reaching code execution via gadget chains. |
| OpenAM before 16.1.3 contains a reflected cross-site scripting vulnerability that allows unauthenticated attackers to inject script by supplying crafted parameters rendered unencoded on the OAuth2 authorization error page. Attackers can lure victims to a crafted /oauth2/authorize link with repeated parameters to run JavaScript in the OpenAM origin, acting within existing sessions or redirecting to phishing pages. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Prevent shared tags across queues on Apple A11
On Apple A11, tags of pending commands must be unique across the admin
and IO queues, else the firmware crashes with
"duplicate tag error for tag N", with N being the tag.
Apply the existing workaround for M1 of reserving two tags for the admin
queue to A11. |
| In the Linux kernel, the following vulnerability has been resolved:
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: pmem: keep PREFLUSH before data writes
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flush bio. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: validate CLC firmware records
The CLC region is supplied by firmware, but the loader trusts the
region count and each record length. A malformed image can make the
region table pointer precede the firmware buffer, make the record loop
fail to advance, or index phy->clc past its end. Validate the table and
record bounds before dereferencing or copying. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp_async: drop the errored frame instead of resetting its headroom
ppp_receive_nonmp_frame() prepends a two-byte direction tag before running
the pass/active BPF filters:
*(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG);
Nothing on the receive path guarantees those two bytes of headroom. The
frame-error path in ppp_async's process_input_packet() resets a reused skb's
headroom to zero while claiming to restore it to a freshly allocated state -
but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD:
err:
if (skb) {
/* make skb appear as freshly allocated */
skb_trim(skb, 0);
skb_reserve(skb, - skb_headroom(skb));
}
ap->rpkt still points at that skb, so the next frame is reassembled into it
with no headroom at all. A peer that sends a bad-FCS frame followed by one
beginning ff 03 then leaves a single byte of headroom by the time the filter
tag is pushed, which lands one byte below skb->head:
skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000
data:ffff888003c0ffff tail:0x30 end:0x640 dev:<NULL>
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x13e/0x230
Call Trace:
skb_push+0xbd/0x100
ppp_receive_nonmp_frame+0x48a/0x1d10
ppp_input+0x4e9/0x2f80
ppp_async_process+0x2a/0xe0
tasklet_action_common+0x20f/0x8a0
handle_softirqs+0x18e/0x590
Kernel panic - not syncing: Fatal exception in interrupt
Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb()
gives the rest of the receive path. Besides the filter panic above, when CCP
compression is enabled ppp_decompress_frame() hands skb->data - 2 to
->decompress()/->incomp(), which then reads out of bounds before skb->head
for the same reason.
Rather than restore the headroom, drop the errored frame - as ppp_synctty
already does on its error path - and clear ap->rpkt so the next frame is
reassembled into a fresh skb with proper headroom. This is simpler and fixes
both the filter under-panic and the CCP out-of-bounds read.
The original V1 of this patch made room in ppp_receive_nonmp_frame() with
skb_cow_head(); Eric pointed out that fixing the root cause in the transport
is the right approach.
Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an
interesting (remote) DoS: root configures PPP, the peer supplies two crashing
frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a
second, and returns cleanly with this applied. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Address potential out-of-bounds read in resp_worker()
Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the
owner went away")' fixes the scenario it was intended for by walking the
message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it
skipped over the bounds checking code that is included in decode_message().
This could lead to issues such as reading past the slab allocation's end,
infinite loops or kernel panics. For those issues to happen, a malformed
wire message is needed to be sent from the device.
Instead of duplicating the bounds checking code already present in
decode_message(), use the function inside resp_worker(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/cirrus-qemu: Validate BAR0 size during probe
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to
VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory
causes a supervisor write page fault:
BUG: unable to handle page fault for address: ffffc9000389c000
...
RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110
...
Call Trace:
<TASK>
iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline]
drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442
cirrus_primary_plane_helper_atomic_update+0x98a/0xb00
drivers/gpu/drm/tiny/cirrus-qemu.c:358
drm_atomic_helper_commit_planes+0x626/0xea0
drivers/gpu/drm/drm_atomic_helper.c:3038
drm_atomic_helper_commit_tail+0x60/0x510
drivers/gpu/drm/drm_atomic_helper.c:1989
commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074
drm_atomic_helper_commit+0xa77/0xb10
drivers/gpu/drm/drm_atomic_helper.c:2312
Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource
is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
