| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| phpMyFAQ 4.0.0 before 4.1.9 contains an authentication bypass vulnerability where WebAuthn registration endpoints attach credentials to any account without authentication or challenge validation. Attackers can stage a victim username, submit a forged fmt=none attestation to register a passkey, then log in bypassing passwords and TOTP for account takeover. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: preserve tc_skb_cb across defragmentation
tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving
and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases
the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through
act_ct therefore loses qdisc metadata such as pkt_segs and can trigger
WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled.
Save and restore the full tc_skb_cb around nf_ct_handle_fragments(),
matching the pattern used by ovs_ct_handle_fragments(). |
| Use after free in OpenSSH for Windows allows an unauthorized attacker to execute code over a network. |
| The Hotel Booking WordPress plugin through 3.8 does not implement CSRF protection on its administrative booking order management, allowing attackers to trick a logged-in administrator into creating, deleting, or modifying arbitrary booking order records via a forged request. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix size calculations for 64-bit attributes
net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use
nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and
NET_DM_ATTR_TIMESTAMP).
On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS,
nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for
64-bit alignment.
However, net_dm_packet_report_size() and net_dm_hw_packet_report_size()
used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)),
budgeting 12 bytes instead of up to 16 bytes.
This under-estimation of SKB size can lead to an skb_over_panic() when
__nla_reserve() or skb_put() is subsequently called.
Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. |
| The WP Verify API WordPress plugin through 1.0.0 does not properly sanitize and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks. |
| phpMyFAQ 4.2.0-alpha before 4.2.0-beta contains a stored cross-site scripting vulnerability in SvgSanitizer that allows users with FAQ_EDIT permission to bypass sanitization using XML DTD custom entities. Attackers can upload an SVG defining an entity that expands to javascript in an anchor href, executing script when viewers click it to hijack admin sessions. |
| A vulnerability was found in AUTOMATIC1111 stable-diffusion-webui up to 1.10.1. This impacts the function read_metadata_from_safetensors of the file modules/sd_models.py of the component Metadata Extraction. The manipulation of the argument header length field results in allocation of resources. It is possible to launch the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: bind uarg before filling zerocopy skb
virtio_transport_send_pkt_info() allocates or reuses the zerocopy uarg
before entering the send loop, but virtio_transport_alloc_skb() still
fills the skb before it inherits that uarg. When fixed-buffer vectored
zerocopy hits MAX_SKB_FRAGS, io_sg_from_iter() may partially attach
managed frags and return -EMSGSIZE. The rollback path call kfree_skb()
to free an skb that carries SKBFL_MANAGED_FRAG_REFS but no uarg, so
skb_release_data() falls through to ordinary frag unref.
Pass the uarg into virtio_transport_alloc_skb() and bind it immediately
before virtio_transport_fill_skb(). This keeps control or no-payload skbs
untouched while ensuring success and rollback share one lifetime rule. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| Out-of-bounds read in DNS Server allows an authorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Clear __hyp_running_vcpu when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vCPU context into the hyp's private
vCPU on every run. ctxt_to_vcpu() expects a guest context to have a
NULL __hyp_running_vcpu, which is only ever set on the host context, so
that it resolves the vCPU via container_of(). While this is generally
the case, flush_hyp_vcpu() copies the context verbatim and does not
enforce this, so a value provided by the host is dereferenced at EL2
(host -> EL2).
Fix by clearing __hyp_running_vcpu after the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
If dcid is received for an already-assigned destination CID the spec
requires that both channels to be discarded, but calling l2cap_chan_del
may invalidate the tmp cursor created by list_for_each_entry_safe and
in fact it is the wrong procedure as the chan->dcid may be assigned
previously it really needs to be disconnected.
Calling l2cap_chan_clone directly may still lead to l2cap_chan_del so
instead schedule l2cap_chan_timeout with delay 0 to close the channel
asynchronously. |
| In the Linux kernel, the following vulnerability has been resolved:
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
The change_work was introduced to send device change notifications
from DPLL device callbacks without deadlocking on dpll_lock, since
the callbacks are already invoked under that lock. Now that
__dpll_device_change_ntf() is exported for callers that already
hold dpll_lock, use it directly and remove the change_work
infrastructure entirely.
This eliminates a race condition where change_work could be
re-scheduled after cancel_work_sync() during device teardown,
potentially causing the handler to dereference a freed or NULL
dpll_dev pointer. |
| Heap-based buffer overflow in Windows Text Shaping allows an unauthorized attacker to execute code over a network. |
| Xinference through 4.0.1 contains a path traversal vulnerability on Windows that allows unauthenticated attackers to write and delete arbitrary .json files via backslash sequences in model_name. Attackers can register a persisted custom model through POST /v1/model_registrations/{model_type} with names like ..\..\evil to overwrite configuration or data files writable by the Xinference process. |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'inputs (array key)' parameter in all versions up to, and including, 1.15.48 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
