| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Cisco FXOS CLI feature on specific hardware platforms for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to elevate their administrative privileges to root. The attacker would need valid administrative credentials on the device to exploit this vulnerability. This vulnerability exists because certain system configurations and executable files have insecure storage and permissions. An attacker could exploit this vulnerability by authenticating on the device and then performing a series of steps that includes downloading malicious system files and accessing the Cisco FXOS CLI to configure the attack. A successful exploit could allow the attacker to obtain root access on the device. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the management and VPN web servers of the Remote Access SSL VPN feature of Cisco Secure Firewall ASA Software and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly stop responding, resulting in a DoS condition.
This vulnerability is due to ineffective validation of user-supplied input during the Remote Access SSL VPN authentication process. An attacker could exploit this vulnerability by sending a crafted request to the VPN service on an affected device. A successful exploit could allow the attacker to cause a DoS condition where the device stops responding to Remote Access SSL VPN authentication requests. |
| A vulnerability in the IKEv2 feature of Cisco IOS Software, IOS XE Software, Secure Firewall ASA Software, and Secure FTD Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a DoS condition.
This vulnerability is due to the improper processing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause an infinite loop that exhausts resources and could cause the device to reload. |
| A vulnerability in the implementation of access control rules for loopback interfaces in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should have been blocked to a loopback interface.
This vulnerability is due to improper enforcement of access control rules for loopback interfaces. An attacker could exploit this vulnerability by sending traffic to a loopback interface on an affected device. A successful exploit could allow the attacker to bypass configured access control rules and send traffic that should have been blocked to a loopback interface on the device. |
| A vulnerability in the certificate processing of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of SSL/TLS certificates. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static Network Address Translation (NAT) rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition.
This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending a continuous stream of crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to partially exhaust system memory, causing system instability like being unable to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition. |
| A vulnerability in the function that performs IPv4 and IPv6 Network Address Translation (NAT) DNS inspection for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to an infinite loop condition that occurs when a Cisco Secure ASA or Cisco Secure FTD device processes DNS packets with DNS inspection enabled and the device is configured for NAT44, NAT64, or NAT46. An attacker could exploit this vulnerability by sending crafted DNS packets that match a static NAT rule with DNS inspection enabled through an affected device. A successful exploit could allow the attacker to create an infinite loop and cause the device to reload, resulting in a DoS condition. |
| A vulnerability in the SSL/TLS handler of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause the affected device to reload unexpectedly, leading to a denial of service (DoS) condition.
The vulnerability is due to improper error handling on established SSL/TLS connections. An attacker could exploit this vulnerability by establishing an SSL/TLS connection with the affected device and then sending a malicious SSL/TLS message within that connection. A successful exploit could allow the attacker to cause the device to reload.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. |
| A vulnerability in the SSH subsystem of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to execute operating system commands as root.
This vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by submitting crafted input when executing remote CLI commands over SSH. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges. An attacker with limited user privileges could use this vulnerability to gain complete control over the system. |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) 9.1(6.11) and 9.4(1.2) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device, aka WebVPN XSS. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCve19179. |
| ASA 5515-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim, ASA 5510 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.4.x before 8.4.7 Interim, 8.2.x before 8.2.5 Interim, 9.1.x before 9.1.6 Interim, ASA 5555-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5520 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5505 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5525-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5512-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5585-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5540 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 8.2.x before 8.2.5 Interim, 8.4.x before 8.4.7 Interim, 9.1.x before 9.1.6 Interim, ASA 5515-X Adaptive Security Appliance ASA for Application Centric Infrastructure (ACI) Device Package 1.2.4.x before 1.2.4.8, ASA 5555-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.4.x before 9.4.1 Interim, 9.1.x before 9.1.6 Interim, ASA 5580 Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.1.x before 9.1.6 Interim, ASA 5585-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.2.x before 9.2.4 Interim, 9.4.x before 9.4.1 Interim, ASA 5525-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP, 9.1.x before 9.1.6 Interim, ASA 5545-X Adaptive Security Appliance Adaptive Security Appliance (ASA) Software 9.4.x before 9.4.1 Interim, 9.2.x before 9.2.4 Interim or 9.2.4.SMP. 9.1.x before 9.1.6 ASA does not check the source of the ARP request or GARP packets for addresses it performs NAT translation for under unspecified conditions. |
| A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063. |
| A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device, aka HREF XSS. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. The vulnerability exists in the Cisco Adaptive Security Appliance (ASA) Software when the WEBVPN feature is enabled. Cisco Bug IDs: CSCve91068. |
| A vulnerability in the TLS protocol implementation of legacy Cisco ASA 5500 Series (ASA 5505, 5510, 5520, 5540, and 5550) devices could allow an unauthenticated, remote attacker to access sensitive information, aka a Return of Bleichenbacher's Oracle Threat (ROBOT) attack. An attacker could iteratively query a server running a vulnerable TLS stack implementation to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions. Cisco Bug IDs: CSCvg97652. |
| A vulnerability in the TCP normalizer of Cisco Adaptive Security Appliance (ASA) Software (8.0 through 8.7 and 9.0 through 9.6) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause Cisco ASA and FTD to drop any further incoming traffic on all interfaces, resulting in a denial of service (DoS) condition. The vulnerability is due to improper limitation of the global out-of-order TCP queue for specific block sizes. An attacker could exploit this vulnerability by sending a large number of unique permitted TCP connections with out-of-order segments. An exploit could allow the attacker to exhaust available blocks in the global out-of-order TCP queue, causing the dropping of any further incoming traffic on all interfaces and resulting in a DoS condition. Cisco Bug IDs: CSCvb46321. |
| A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838. |
| A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8). |
| A vulnerability in the DNS code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause an affected device to reload or corrupt the information present in the device's local DNS cache. The vulnerability is due to a flaw in handling crafted DNS response messages. An attacker could exploit this vulnerability by triggering a DNS request from the Cisco ASA Software and replying with a crafted response. A successful exploit could cause the device to reload, resulting in a denial of service (DoS) condition or corruption of the local DNS cache information. Note: Only traffic directed to the affected device can be used to exploit this vulnerability. This vulnerability affects Cisco ASA Software configured in routed or transparent firewall mode and single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 9.1(7.12) 9.2(4.18) 9.4(3.12) 9.5(3.2) 9.6(2.2). Cisco Bug IDs: CSCvb40898. |
| A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243. |
