Export limit exceeded: 401682 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (15737 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2020-37031 | 1 Ashkon | 1 Simple Startup Manager | 2026-04-15 | 8.4 High |
| Simple Startup Manager 1.17 contains a local buffer overflow vulnerability that allows attackers to execute arbitrary code by overwriting memory through the 'File' input parameter. Attackers can craft a malicious payload with 268 bytes to trigger code execution, bypassing DEP and overwriting memory addresses to launch calc.exe. | ||||
| CVE-2018-25154 | 1 Gnu | 1 Barcode | 2026-04-15 | 9.8 Critical |
| GNU Barcode 0.99 contains a buffer overflow vulnerability in its code 93 encoding process that allows attackers to trigger memory corruption. Attackers can exploit boundary errors during input file processing to potentially execute arbitrary code on the affected system. | ||||
| CVE-2023-20513 | 2026-04-15 | 3.3 Low | ||
| An insufficient bounds check in PMFW (Power Management Firmware) may allow an attacker to utilize a malicious VF (virtualization function) to send a malformed message, potentially resulting in a denial of service. | ||||
| CVE-2025-0236 | 2026-04-15 | 5.3 Medium | ||
| Out-of-bounds vulnerability in slope processing during curve rendering in Generic PCL6 V4 Printer Driver / Generic UFR II V4 Printer Driver / Generic LIPSLX V4 Printer Driver. | ||||
| CVE-2025-59731 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | N/A |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data. We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-11680 | 1 Warmcat | 1 Libwebsockets | 2026-04-15 | 3.1 Low |
| Out-of-bounds Write in unfilter_scanline in warmcat libwebsockets allows, when the LWS_WITH_UPNG flag is enabled during compilation and the HTML display stack is used, to write past a heap allocated buffer possibly causing a crash, when the user visits an attacker controlled website that contains a crafted PNG file with a big width value that causes an integer overflow which value is used for determining the size of a heap allocation. | ||||
| CVE-2025-3873 | 2026-04-15 | N/A | ||
| The following APIs for the Silcon Labs SiWx91x prior to vesion 3.4.0 failed to check the size of the output buffer of the caller which could lead to data corruption on the host (Cortex-M4) application. sl_si91x_aes sl_si91x_gcm sl_si91x_ccm sl_si91x_sha | ||||
| CVE-2025-1883 | 2026-04-15 | 7.8 High | ||
| Out-Of-Bounds Write vulnerability exists in the OBJ file reading procedure in SOLIDWORKS eDrawings on Release SOLIDWORKS Desktop 2025. This vulnerability could allow an attacker to execute arbitrary code while opening a specially crafted OBJÂ file. | ||||
| CVE-2025-10451 | 1 Insyde | 1 Insydeh2o | 2026-04-15 | 8.2 High |
| Unchecked output buffer may allowed arbitrary code execution in SMM and potentially result in SMM memory corruption. | ||||
| CVE-2025-5898 | 1 Gnu | 1 Pspp | 2026-04-15 | 5.3 Medium |
| A vulnerability classified as critical has been found in GNU PSPP 82fb509fb2fedd33e7ac0c46ca99e108bb3bdffb. Affected is the function parse_variables_option of the file utilities/pspp-convert.c. The manipulation leads to out-of-bounds write. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2010-20115 | 2 Arcane Software, Microsoft | 2 Vermillion Ftp Daemon, Windows | 2026-04-15 | N/A |
| Arcane Software’s Vermillion FTP Daemon (vftpd) versions up to and including 1.31 contains a memory corruption vulnerability triggered by a malformed FTP PORT command. The flaw arises from an out-of-bounds array access during input parsing, allowing an attacker to manipulate stack memory and potentially execute arbitrary code. Exploitation requires direct access to the FTP service and is constrained by a single execution attempt if the daemon is installed as a Windows service. | ||||
| CVE-2025-11266 | 2 Grassroots Dicom Project, Malaterre | 2 Grassroots Dicom, Grassroots Dicom | 2026-04-15 | 6.6 Medium |
| An out-of-bounds write vulnerability exists in the Grassroots DICOM library (GDCM). The issue is triggered during parsing of a malformed DICOM file containing encapsulated PixelData fragments (compressed image data stored as multiple fragments). This vulnerability leads to a segmentation fault caused by an out-of-bounds memory access due to unsigned integer underflow in buffer indexing. It is exploitable via file input, simply opening a crafted malicious DICOM file is sufficient to trigger the crash, resulting in a denial-of-service condition. | ||||
| CVE-2024-3298 | 2026-04-15 | 7.8 High | ||
| Out-Of-Bounds Write and Type Confusion vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted DWG or DXF. NOTE: this vulnerability was SPLIT from CVE-2024-1847. | ||||
| CVE-2024-3299 | 2026-04-15 | 7.8 High | ||
| Out-Of-Bounds Write, Use of Uninitialized Resource and Use-After-Free vulnerabilities exist in the file reading procedure in eDrawings from Release SOLIDWORKS 2023 through Release SOLIDWORKS 2024. These vulnerabilities could allow an attacker to execute arbitrary code while opening a specially crafted SLDDRW or SLDPRT file. NOTE: this vulnerability was SPLIT from CVE-2024-1847. | ||||
| CVE-2024-33008 | 2026-04-15 | 4.9 Medium | ||
| SAP Replication Server allows an attacker to use gateway for executing some commands to RSSD. This could result in crashing the Replication Server due to memory corruption with high impact on Availability of the system. | ||||
| CVE-2024-20496 | 1 Cisco | 2 Sd-wan Vedge Cloud, Sd-wan Vedge Router | 2026-04-15 | 6.1 Medium |
| A vulnerability in the UDP packet validation code of Cisco SD-WAN vEdge Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected system. This vulnerability is due to incorrect handling of a specific type of malformed UDP packet. An attacker in a machine-in-the-middle position could exploit this vulnerability by sending crafted UDP packets to an affected device. A successful exploit could allow the attacker to cause the device to reboot, resulting in a DoS condition on the affected system. | ||||
| CVE-2025-59728 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.5 Medium |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2025-65001 | 1 Fujitsu | 1 Fbiosdrv | 2026-04-15 | 8.2 High |
| Fujitsu fbiosdrv.sys before 2.5.0.0 allows an attacker to potentially affect system confidentiality, integrity, and availability. | ||||
| CVE-2025-59729 | 1 Ffmpeg | 1 Ffmpeg | 2026-04-15 | 6.8 Medium |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer. If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000. The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer. There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation. We recommend upgrading to version 8.0 or beyond. | ||||
| CVE-2024-47897 | 2026-04-15 | 8.8 High | ||
| Software installed and run as a non-privileged user may conduct improper GPU system calls resulting in platform instability and reboots. | ||||