| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: fix refcount leak in p9_xen_response() on wrong tag
p9_xen_response() looks up the request for an incoming reply with
p9_tag_lookup(), which takes a reference on the returned p9_req_t. When
the tag does not resolve to a request in REQ_STATUS_SENT, the function
warns and continues the loop without dropping that reference, permanently
leaking the p9_req_t and its msize buffers. The reply header, including
the tag, is supplied by the backend, so a malicious or buggy 9P backend
can leak kernel memory on every crafted response.
Drop the reference before continuing. |
| In the Linux kernel, the following vulnerability has been resolved:
block: restore the iterator when rejecting a misaligned bio
bio_iov_iter_get_pages() can extract some iovecs before encountering a
misaligned one. It releases the pages and rejects the entire bio, but
leaves the supplied iterator advanced.
An iomap direct-I/O caller may subsequently reexpand the iterator's
byte count and fall back to buffered I/O. The reexpanded count then
includes bytes before the iterator's current segment, potentially
causing iterate_iovec() to read beyond the imported iovec array.
In a reproducer using an initial empty iovec followed by 10-byte and
1015-byte segments, writev() returned 1015 instead of 1025 and KASAN
reported an 8-byte read beyond the nine-element iovec allocation.
Saving and restoring the iterator on the rejected-bio path makes
writev() return 1025 and eliminates the KASAN report.
Restore the entire iterator rather than reverting a byte count:
advancing past an empty segment changes its position without consuming
any bytes.
Leave successful and partially accepted bio paths unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Ensure that count is set before access to ent[] __counted_by()
get_supported_features() assigns entries->num_features only after the
memcpy() loop that fills entries->ent[] has already run. Since ent[]
is __counted_by(num_features), the compiler's bounds instrumentation
sees a 0-length array during that loop and FORTIFY_SOURCE trips on
the memcpy. Set @num_features right after allocation, before any
write into ent[], so the bound is correct for the whole lifetime of
the array.
This was found via a fortify panic:
memcpy: detected buffer overflow: 384 byte write of buffer size 0
WARNING: lib/string_helpers.c:1035 at __fortify_report+0x54/0xa0
kernel BUG at lib/string_helpers.c:1043!
Call trace:
__fortify_panic+0x10/0x18
get_supported_features.isra.0+0x4a0/0x4d0 [cxl_core]
devm_cxl_setup_features+0x84/0x120 [cxl_core]
cxl_pci_probe+0x254/0x5e0 [cxl_pci]
Same class of bug, same fix shape as commit 6c9d2e87df40
("cxl/fwctl: Fix __fortify_panic"), which fixed the analogous issue
in cxlctl_get_supported_features() but missed this one.
[ dj: Fixed up title typo per Jonathan. ] |
| MapServer is a system for developing web-based GIS applications. Prior to 8.6.5, an unauthenticated reflected cross-site scripting vulnerability in OGC API Features collection-items HTML output allows crafted offset or limit query parameter values from raw CGI request handling in src/mapogcapi.cpp to reach template.params.offset or template.params.limit. share/ogcapi/templates/html-bootstrap/collection-items.html inserts those values without quoting or escaping into a script element. A victim who follows a crafted request can have the script element terminated by attacker-controlled markup, causing arbitrary JavaScript to execute under the MapServer origin and enabling access to browser-session data, actions as the victim, and content manipulation. This issue is fixed in 8.6.5. |
| MapServer is a system for developing web-based GIS applications. From 6.0 until 8.6.5, MapServer's WMS OpenLayers output, selected by FORMAT=application/openlayers or template=openlayers, substitutes a request-derived online-resource value into a single-quoted JavaScript string in src/maptemplate.c. The prior remediation for GHSA-xqj6-vjqr-33vv used msEscapeJSonLikeString() to protect the JavaScript string but did not neutralize angle brackets, so attacker-controlled X-Forwarded-Host or X-Forwarded-Proto values can still terminate the script element at the HTML parser layer. Deployments that expose attacker-controlled PATH_INFO or map= values reaching the same string are also affected. An unauthenticated attacker can cause arbitrary JavaScript to execute in a victim's browser under the MapServer origin when the victim loads the crafted output. This issue is fixed in version 8.6.5. |
| MapServer is a system for developing web-based GIS applications. Prior to 8.6.5, MapServer's PostgreSQL JOIN implementation in src/mappostgresql.c copies the source layer attribute selected by JOIN FROM into joininfo->from_value and embeds it without parameterization or escaping into a dynamically generated PostgreSQL query executed by PQexec(). When PostgreSQL JOIN support is enabled, an attacker who can control that source feature attribute can inject quote characters and SQL operators that alter the intended WHERE predicate. This second-order injection can cause unintended rows and JOIN attributes to be returned, potentially exposing information from unrelated PostgreSQL records. This issue is fixed in version 8.6.5. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. This candidate is a reservation duplicate of an unpublished CVE. All references and descriptions in this candidate have been removed to prevent accidental usage. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate is a reservation duplicate. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| Vulnerability in the Oracle Business Intelligence Enterprise Edition product of Oracle Analytics (component: Analytics Server). Supported versions that are affected are 8.2.0.0.0 and 26.01.0.0.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Business Intelligence Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Business Intelligence Enterprise Edition accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| A vulnerability has been found in continuedev continue up to 2.1.0. This vulnerability affects the function LocalPlatformClient.resolveFQSNs of the file core/config/yaml/LocalPlatformClient.ts of the component Config Resolution. Such manipulation of the argument Name leads to information disclosure. Local access is required to approach this attack. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: cancel all matching requests in one pass
With IORING_ASYNC_CANCEL_ALL, __io_async_cancel() calls io_try_cancel()
until nothing is found, and io_poll_cancel() cancels one request per
call, starting each lookup at the beginning of the hash. A cancelled
request stays hashed until its task work runs, so every lookup walks
past the ones already cancelled. Cancelling K of N pending polls visits
about K*N/2 requests in one io_uring_enter(), with uring_lock held.
A single CANCEL_FD|ALL on 80000 polls on one eventfd takes 17.06s,
0.02s with this change. With voluntary preemption the soft lockup
watchdog fires:
watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [repro:100]
RIP: 0010:io_cancel_req_match+0x19/0xa0
io_poll_cancel+0x73/0x170
io_try_cancel+0x7b/0xf0
__io_async_cancel+0x41/0x110
Walk the hash once and cancel every match, as io_cancel_remove() does
for futex and waitid. Cancel by user_data only needs its own bucket.
__io_async_cancel() still loops until nothing is found, so a request
that io-wq parks in the poll hash meanwhile is still cancelled.
A cancel that matches one request now walks the whole hash twice instead
of stopping at the match. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/register: enforce per-task restrictions in io_uring_register_blind()
When io_uring_register(2) is invoked with fd == -1, it dispatches
directly to io_uring_register_blind() without checking
current->io_uring_restrict.
As a result, a task with per-task register restrictions installed via
IORING_REGISTER_RESTRICTIONS can still invoke blind registration opcodes
such as IORING_REGISTER_SEND_MSG_RING even when those opcodes are not in
the task's allowed register_op bitmap.
Check current->io_uring_restrict->register_op in
io_uring_register_blind() before dispatching blind registration opcodes. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: mask socket type with SOCK_TYPE_MASK in io_socket_bpf_populate()
When an IORING_OP_SOCKET request is prepared in io_socket_prep(),
sock->type retains creation flags such as SOCK_CLOEXEC and SOCK_NONBLOCK
until __sys_socket_file() masks them off with SOCK_TYPE_MASK during
execution.
However, io_socket_bpf_populate() copies sock->type into
bctx->socket.type without masking off ~SOCK_TYPE_MASK. As a result, a
cBPF filter inspecting bctx->socket.type against socket types such as
SOCK_DGRAM or SOCK_STREAM can be bypassed by ORing SOCK_CLOEXEC or
SOCK_NONBLOCK into the socket type.
Mask sock->type with SOCK_TYPE_MASK when populating bctx->socket.type. |
| Vulnerability in the Oracle EDI Gateway product of Oracle E-Business Suite (component: All Miscellaneous EDI Issues). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle EDI Gateway. Successful attacks of this vulnerability can result in takeover of Oracle EDI Gateway. CVSS 3.1 Base Score 7.2 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H). |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate is a reservation duplicate. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| Vulnerability in the Oracle Inventory Management product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Difficult to exploit vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Inventory Management executes to compromise Oracle Inventory Management. Successful attacks of this vulnerability can result in takeover of Oracle Inventory Management. CVSS 3.1 Base Score 7.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| A flaw has been found in continuedev continue up to 2.1.0. This affects the function DataLogger.logDevData of the file core/data/log.ts of the component Dev Data Logging. This manipulation causes information disclosure. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| Vulnerability in the Oracle Order Management product of Oracle E-Business Suite (component: Product Diagnostic Tools). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Order Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Order Management accessible data as well as unauthorized read access to a subset of Oracle Order Management accessible data. CVSS 3.1 Base Score 5.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:L/I:H/A:N). |
| Vulnerability in the Oracle Purchasing product of Oracle E-Business Suite (component: Endeca). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Purchasing. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Purchasing accessible data as well as unauthorized access to critical data or complete access to all Oracle Purchasing accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
| Vulnerability in the Oracle Sales Online product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Sales Online. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Sales Online accessible data as well as unauthorized read access to a subset of Oracle Sales Online accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:H/A:N). |