| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, net.jpountz.lz4.LZ4BlockInputStream refill() validates that the compressedLen field in a legacy LZ4Block header is nonnegative but allocates a compressed-input buffer of that attacker-controlled size before reading payload data, allowing a header-only stream to request a near-2 GiB allocation and exhaust the JVM heap. Canonical writers emit raw blocks when compression is not smaller than the original block, but vulnerable readers accept non-canonical oversized compressed blocks. This issue is fixed in version 1.11.2. |
| Clickjacking in EVP in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Use of released resource in Session in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix server use-after-free in cifs_chan_skip_or_disable()
When a secondary channel is no longer supported by the server,
cifs_chan_skip_or_disable() drops the channel reference with
cifs_put_tcp_session() and then continues to use the server pointer by
calling cifs_signal_cifsd_for_reconnect() on it and reading its
primary_server pointer. cifs_put_tcp_session() can drop the last
reference of the channel and tear it down, so both the channel and the
primary server (whose reference is also dropped by
cifs_put_tcp_session()) can be freed before they are signaled for
reconnect.
Signal the channel and the primary server and capture the primary
server pointer before dropping the channel reference with
cifs_put_tcp_session(). |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix rlist race and missing initialization
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: fix refcount bug in iwpm_get_nlmsg_request()
iwpm_get_nlmsg_request() initializes refcount _after_ list_add_tail()
making it accessible to global list where another CPU can kref_get()
on nlmsg_request causing a refcount "addition on 0" bug. Fix this
by initializing kref _before_ list_add_tail() so refcount for
nlmsg_request can be incremented/decremented normally. In addition,
also initialize every field before list_add_tail(). |
| In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: Prevent freeing a timer which is queued on the expiry list
Kijo analyzed another race in the POSIX CPU timer code:
Commit bf635681c906 converted cpu_timer::firing from a tristate value to a
boolean. This lost the distinction between "not owned by the firing list"
and "still owned, but delivery was canceled". The resulting race is:
expiry handler timer_settime() timer_delete()
-------------- --------------- --------------
collect timer onto
private firing list
firing = true
observes firing = true
firing = false
return TIMER_RETRY
wait for handler
observes firing = false
finish deletion
unhash and free timer
resume list traversal
read freed elist.next
-> UAF
The firing bit is clearly the wrong indicator since that commit.
Check whether the timer is queued on the expiry list or not instead. If it
is queued clear the firing bit to prevent signal delivery as before and
return TIMER_RETRY so the caller unlocks the timer which allows the expiry
code to make progress and remove it from the list. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short association responses
libipw_handle_assoc_resp() reads the capability, status and aid fields
of the 30-byte association response prefix and then computes the
information element length as
stats->len - sizeof(*frame)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() turns a
frame shorter than the fixed fields into a length near 64 KiB, and the
parser then reads past the receive buffer.
Both the ipw2100 and ipw2200 management receive paths reach this
function having established only that the frame carries the generic
24-byte three-address header.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected device as a low-privileged user to exploit this vulnerability. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by injecting arbitrary commands to a file as a lower-privileged user. The commands are then executed on the device by the root user. A successful exploit could allow the attacker to execute arbitrary commands as the root user. |
| NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__pathArcTo() when parsing SVG arc commands. A specially crafted SVG document containing extreme arc radius values can cause intermediate arc calculations to produce a NaN delta angle. The function subsequently converts this NaN value to int without validating that it is finite and representable, resulting in undefined behavior and process termination, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid()
kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops
mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a
reference on the kvm_nested_guest pointer obtained from the IDR. A
concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race
through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove /
--refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving
the iterating vCPU with a dangling pointer. The subsequent
mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable,
gp->shadow_lpid and gp->l1_host all touch freed memory. The free path
is fully L1-controlled.
Fix this by incrementing gp->refcnt inside the loop before dropping
mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the
reference with kvmhv_put_nested() after the per-guest work completes.
This is the same get/put discipline already used at every other
call site that drops mmu_lock while holding a nested-guest pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: protect runlist updates with the runlist lock
ntfs_non_resident_attr_shrink() calls runlist helpers that require the
runlist write lock, but did not hold it while freeing clusters and
truncating the runlist. Serialize those operations and the resident
conversion with the runlist lock.
ntfs_attr_map_cluster() can merge a newly allocated run before updating
mapping pairs. If the update fails, free the clusters and restore both
the in-memory runlist and on-disk mapping pairs from a saved runlist.
Mark the volume in error if either rollback step fails. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Bound fragmented header copies by the remaining length
siw_get_hdr() can receive an extended DDP/RDMAP header across more than
one TCP callback. The first callback may receive most of the header,
while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead
of the number of missing bytes. This makes the destination move past the
end of the header and overwrite the receive state, including
fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd
value as a copy offset, which creates an OOB write.
Use the number of header bytes already received when calculating the
next copy length. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: save input state data before secpath resets
xfrm_input() stores the current xfrm_state in the skb secpath while it
continues receive-side processing. Some input paths can reset that secpath
before xfrm_input() has finished dereferencing the state.
Receive callback users such as VTI and XFRM interfaces can reset the
secpath. The VTI receive path does so before checking whether the packet
crosses network namespaces, while the XFRM interface path does so only for
cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also
reset the secpath before the final drop callback reports the current
state's protocol.
If secpath_reset() drops the last state reference while the state is
concurrently deleted, xfrm_input() can still dereference the freed state
when selecting transport_finish() or reporting the drop callback protocol.
Save the state protocol on the stack while the state is still valid,
and use the already saved address family for transport_finish(). A larval
XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This
preserves the existing drop-path fallback while avoiding the post-reset
state dereferences without adding an extra state reference to every
received packet. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short beacon and probe responses
libipw_process_probe_response() and the libipw_network_init() call it
makes assume the frame contains the full 36-byte beacon and probe
response prefix, but the ipw2100 and ipw2200 receive paths only
establish that a management frame carries the generic 24-byte
three-address header.
libipw_network_init() then computes the information element length as
stats->len - sizeof(*beacon)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() yields
65524 for a 24-byte beacon, and the parser then walks the receive
buffer as if it held almost 64 KiB of information elements, reading
past the allocation.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in David Lingren Media LIbrary Assistant media-library-assistant allows Stored XSS.This issue affects Media LIbrary Assistant: from n/a through 3.41. |
| Missing Authorization vulnerability in sc Internet Vivoo WP Rentals wprentals allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP Rentals: from n/a through 3.14.2. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Media Rocket Lazy Load rocket-lazy-load allows Stored XSS.This issue affects Rocket Lazy Load: from n/a through 2.4.0. |
| Missing Authorization vulnerability in WP Chill Modula Image Gallery modula-best-grid-gallery allows Retrieve Embedded Sensitive Data.This issue affects Modula Image Gallery: from n/a through 3.0.11. |
