| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a low-privileged user who holds the "power" Splunk role could inject malicious content into a Splunk Web view. When another authenticated user opens the affected view in Splunk Web, the injected content executes unauthorized JavaScript code within the viewing user's browser session.
The vulnerability is possible because Splunk Web does not properly validate content in a view definition before rendering the view.
For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.2/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation. |
| In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user who can connect to a Splunk-to-Splunk (S2S) data forwarding receiver could cause the Splunk daemon to terminate unexpectedly. The unexpected termination interrupts data indexing and access to the management API and Splunk Web until the Splunk Enterprise process restarts.
The vulnerability is possible because the S2S data forwarding receiver does not validate an optional field in forwarded event data, which results in a null pointer dereference when the field is missing.
For more information see Intermediate data routing using universal and heavy forwarders (https://help.splunk.com/en/splunk-enterprise/get-started/splunk-validated-architectures/getting-data-in-forwarding-and-preprocessing/intermediate-data-routing-using-universal-and-heavy-forwarders) in the Splunk documentation. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost/vsock: size receive SKBs from declared payload
vhost_vsock_alloc_skb() sizes the skb from iov_length(), the total guest
descriptor length. virtio_transport_inc_rx_pkt() instead adds hdr->len to
rx_bytes and buf_used, and budgets each queued skb as SKB_TRUESIZE(0). The
guest controls the descriptor length and hdr->len independently.
A guest can therefore provide a 64 KiB descriptor while declaring a zero
payload. The descriptor-sized skb remains queued, rx_bytes and buf_used
remain unchanged, and only the fixed queue-entry budget limits retention.
This is not a lifetime leak: the skb is freed when dequeued or at socket
teardown. Repeating this across connections can nevertheless exhaust host
memory. On Linux v7.2, 455 such descriptors retained 30,255,680 bytes for
a 262,144-byte receive buffer; a full-payload control retained 265,984
bytes.
Vhost previously read hdr->len and allocated pkt->buf from that value. The
conversion from virtio_vsock_pkt to sk_buff instead allocated receive skbs
from the descriptor length, introducing the allocation-accounting mismatch.
Copy the header into a stack object and validate hdr->len before allocating
the skb. Size the allocation as sizeof(hdr) + payload_len so descriptor
capacity no longer determines queued memory. Check payload_len against
len - sizeof(hdr) to avoid addition overflow on 32-bit hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: clamp skb->queue_mapping before indexing the tx queue
This issue was caught by Sashiko (nipa). A producer-side path cap is
already merged (ea4d4b5dddb5); this patch adds the matching consumer-side
caps.
The issue:
The tx queue is picked and capped in netdev_core_pick_tx() before the
__dev_xmit_skb() qdisc enqueue path. A tc BPF program running inside an
egress qdisc (not clsact) can then change __sk_buff->queue_mapping; that
store is never re-checked. bpf_convert_ctx_access() bounds it only by
NO_QUEUE_MAPPING, not by the device's queue count.
Two consumers read the stale value:
- On dequeue, qdisc_restart() calls netdev_get_tx_queue(), which
indexes dev->_tx[]. netdev_get_tx_queue() guards it with just a
DEBUG_NET_WARN_ON_ONCE, so sch_direct_xmit() takes the out-of-bounds
txq->_xmit_lock and writes txq->xmit_lock_owner past the end of the
allocation on non-lltx devices such as ifb. Drivers that index their
rings from skb_get_queue_mapping() (ex: ifb) go out of range the same
way.
- On enqueue, taprio_enqueue() indexes q->qdiscs[] with the same value;
the array is sized dev->num_tx_queues. A duplicating netem on a child
qdisc clones the skb and re-enqueues the clone at the taprio root
(qdisc_root_bh()) through a direct rootq->enqueue() call, so the value
reaches taprio_enqueue() before any dequeue cap runs.
The Fix:
Cap the mapping at the consumers and write the capped value back, so the
qdisc's _tx[] lookup, the taprio q->qdiscs[] lookup and any later driver
read stay in range.
On the dequeue side the cap folds into the dequeue path instead of a
separate walk over the returned list: dequeue_skb() caps the head, and
each bulk helper caps the element it appends. For a qdisc that is not
TCQ_F_ONETXQUEUE, netdev_cap_txqueue() logs a ratelimited notice and
selects queue 0.
A TCQ_F_ONETXQUEUE qdisc is bound to a single tx queue: dequeue_skb() uses
q->dev_queue for the frozen check, the BQL limit and the trace point, while
qdisc_restart() transmits on the skb's queue. Capping an out-of-range
mapping to queue 0 would therefore send a per-queue child's skb through a
different queue than the one it was dequeued for. On mq, mqprio, taprio and
htb offload children, a stopped queue 0 could then park the list in
q->gso_skb, and the later wake would schedule queue 0's own child instead
of this qdisc. Pin a TCQ_F_ONETXQUEUE mapping to the qdisc's own queue to
keep the documented invariant.
The pin covers every mapping, not only an out-of-range one: an in-range
mapping that a filter sets on one of those per-queue children is rewritten
to the child's own queue, and this path does not call netdev_cap_txqueue(),
so it logs no notice. On a single-queue device qdisc_create() sets
TCQ_F_ONETXQUEUE, so the one-queue trigger described below also takes this
branch and is corrected without a notice.
That also keeps a bulk list on one queue by construction: every element of
a TCQ_F_ONETXQUEUE qdisc, including a follower changed by a filter, is
pinned to q->dev_queue before it is appended. The fast bulk helper
therefore needs no head comparison and no skb_bad_txq requeue; the slow
helper, used only by non-ONETXQUEUE qdiscs, still compares and requeues a
mismatched follower, where a wake on any queue reschedules q.
On the enqueue side taprio_enqueue() caps the mapping against
real_num_tx_queues and writes it back before selecting q->qdiscs[queue], so
a duplicating child cannot steer the clone out of the array.
Conditions to recreate the bug:
The dequeue path: load a SCHED_CLS or SCHED_ACT program that stores
__sk_buff->queue_mapping (a tc BPF action is enough), attach it to a
transmit qdisc (for example a matchall filter on a prio root), and send a
packet. With a 1-queue device a store of 1 indexes one past dev->_tx[].
Under KASAN with panic_on_warn=1 the unfixed kernel faults with "BUG:
KASAN: slab-out-
---truncated--- |
| In Splunk SOAR versions below 8.8.0, an authenticated user who can view and edit containers in at least one container label could create artifacts with parent relationships to containers and artifacts outside those labels. This could expose fields from restricted artifacts and modify incident lineage.
The vulnerability is possible because Splunk SOAR does not verify access to the selected parent container and parent artifact when it creates an artifact. |
| In Splunk SOAR versions below 8.8.0, a user that holds a role with the System Settings view and edit permissions could test a Lightweight Directory Access Protocol authentication provider and cause Splunk SOAR to send a stored directory service account bind password to a host that the user controls.
The vulnerability is possible because Splunk SOAR reuses a stored directory service provider credential when an authentication test uses a different directory service connection destination. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fail the mount if the casefold flag has changed
An unprivileged user in a user namespace can repeatedly trigger a kernel
warning with their own overlay mounts. They do so by changing the
casefold flag of the topmost layer's empty root, the top directory of
that layer, after the layers are set and before the mount is created.
The casefold flag of a directory makes name lookups in that directory
case-insensitive. All layers of an overlay must agree on casefolding.
ovl_mount_dir_check() reads the casefold flag of a layer root when
fsconfig() sets that layer, and saves the result in ofs->casefold. The
mount is created later, by another fsconfig() call with
FSCONFIG_CMD_CREATE.
The casefold flag of an empty directory can be changed.
The casefold flag of the overlay root must match ofs->casefold.
ovl_get_root() copies the flag from the topmost layer root, as it is
when the mount is created. On a mismatch, ovl_get_root() only does a
WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(),
so each such mount warns again.
An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the
casefold option in their namespace.
Reproduced by changing the casefold flag of the empty upper directory
after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and
ext4 layers, and as uid 1000 in a user namespace.
Fix this by replacing the WARN_ON() with a check that fails the mount
with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/gup: check folio->mapping under folio lock in memfd_pin_folios()
memfd_pin_folios() pins folios from the page cache without taking the
folio lock. khugepaged or MADV_COLLAPSE can therefore replace a folio
after checking its refcount while memfd_pin_folios() still pins the old
folio. The caller then receives a folio which is no longer part of the
memfd.
For udmabuf and iommufd, this can cause data corruption: DMA accesses
the detached folio rather than the live memfd contents. DMA reads can
return stale data, while DMA writes update the detached copy and are
lost from the live memfd. The detached folio remains pinned, so these
accesses do not constitute a use-after-free or target another
application's memory. For memfd live update, the stale contents can
reappear in the memfd after handover.
Lock the folio and recheck folio->mapping before pinning it, like other
page cache users do. If the folio was removed, retry the folio lookup
from the index that was removed. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: reject keep-alive timeouts that would overflow
nvmet_set_feat_kato() and nvmet_alloc_ctrl() convert the 32-bit
millisecond KATO from the host to seconds with DIV_ROUND_UP(kato, 1000).
The addition in DIV_ROUND_UP() is done in 32 bits, so any KATO above
4294966296 ms wraps around and rounds to 0 seconds. A Set Features
command with KATO 0xffffffff then succeeds but disables the keep-alive
timer: Get Features returns 0 and Keep Alive fails with Keep Alive
Timeout Invalid. A Connect command with such a KATO creates a controller
without a keep-alive timer.
The converted value has more consumers that can overflow. Get Features
multiplies it by 1000, and the timer paths multiply it by HZ in 32 bits
and arm a delay that must not exceed MAX_JIFFY_OFFSET.
Reject a KATO whose rounded value does not fit all of these. Return Keep
Alive Timeout Invalid from both Set Features and Connect. Validate Set
Features before stopping the current timer so a failed update leaves its
timeout unchanged. Round in 64 bits. A KATO of 0 keeps its current
meaning. |
| In the Linux kernel, the following vulnerability has been resolved:
net: restore refcount ordering for lockless socket access
Before commit fb041bb7c0a9 ("locking/refcount: Consolidate implementations
of refcount_t"), default builds implemented refcount_inc_not_zero() using
atomic_add_unless(), which provided full memory ordering on success. The
commit removed that ordering on weakly ordered architectures, allowing
accesses after a successful reference acquisition to be reordered before
it.
Use refcount_inc_not_zero_acquire() in the IPv4 and IPv6 established
lookups and in inet_twsk_purge(), where the socket is validated again
after taking a reference.
bpf_sk_assign() can receive a socket pointer obtained through BTF
without a reference. Use acquire ordering when it takes its own reference
for a refcounted socket.
Use refcount_set_release() when setting refcounts in the SYN cookie,
TCP Fast Open, request migration, and TIME_WAIT paths. Keep the existing
TIME_WAIT smp_wmb(), which separately orders the refcount store before
ehash publication. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: clamp the pNFS layout range to the maximum file size
xfs_fs_map_blocks() lets two bad layout ranges through. An offset of
2^63 or more is negative and passes "offset > limit". A length above
the limit, such as NFS4_UINT64_MAX, wraps "offset > limit - length"
and stays unclamped. With NFS4_UINT64_MAX, a read layout is built from
an uninitialized mapping.
Reject a negative offset and one at the limit, and clamp the length.
This needs "xfs: cap the block count of xfs_iomap_write_direct() at one
extent". |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: cap the block count of xfs_iomap_write_direct() at one extent
xfs_iomap_write_direct() reserves blocks for the whole count in an
unsigned int. For a pNFS layout the client chooses that count, and an
RW LAYOUTGET for 16 TiB wraps the reservation and shuts XFS down.
xfs_bmapi_write() maps at most XFS_MAX_BMBT_EXTLEN blocks here, so cap
the count at that. nfsd asks again for the rest. The other callers get
the same mapping as before. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: mark the inode preallocated for pNFS write layouts past EOF
xfs_fs_map_blocks() marks the inode XFS_DIFLAG_PREALLOC only when it
allocates blocks for a write layout. A write layout past EOF can also
hand out allocated blocks, such as speculative preallocation. blockgc
then frees them under the layout, and another file may get them.
Mark the inode whenever a write mapping ends past EOF. |
| A denial-of-service flaw was found in gnome-remote-desktop. An unauthenticated remote attacker can open RDP connections without completing the handshake and retain the connection-throttling slots indefinitely because no pre-authentication handshake deadline is enforced. By exhausting the global connection limit, an attacker can prevent new RDP clients from connecting until a holding socket is closed. |
| In Splunk SOAR versions below 8.8.0, a user that holds a role with permission to edit playbooks and repositories could store a modified utility block in a playbook. If a user that holds a role with permission to edit playbook code later opens and saves the playbook in the Visual Playbook Editor, a subsequent playbook run could send a Representational State Transfer (REST) API delete request to a resource outside the intended data list. The user account that runs the playbook must have permission to delete the target resource.
The vulnerability is possible because Splunk SOAR does not prevent a utility block from changing the intended REST API request path.
For more information see Data management automation API (https://help.splunk.com/en/splunk-soar/soar-on-premises/python-playbook-api-reference/6.3.0/automation-api/data-management-automation-api) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.8.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. |
| In Splunk SOAR versions below 8.8.0, a user who can edit and run a playbook on a permitted label could cause Splunk SOAR to return custom-function status and callback state from another playbook run.
The issue results from insufficient binding between a custom-function-status request and the playbook run that initiates it. |
| baserCMS is a website development framework. From 5.2.3 until 5.3.0, BcThemeFileService::getFullpath() in plugins/bc-theme-file/src/Service/BcThemeFileService.php skips its path containment check when realpath() fails for a nonexistent theme subdirectory selected by the type parameter. An authenticated administrator can supply a traversal path through the theme-file API to access locations outside the theme directory. The bypass of the CVE-2026-30940 fix can permit file writes, overwrites or deletion within the PHP process permissions and, where executable PHP can be written, remote code execution. This issue is fixed in 5.3.0. |
| Collabora Online is a collaborative online office suite based on LibreOffice technology. Prior to 24.04.19.3, 25.04.13.3, and 26.04.3.3, the RouteToken query parameter is reflected into the unauthenticated admin-console page without HTML encoding. The admin-console page is served without authentication. A victim must load a crafted URL, and token exposure requires the victim to be an administrator already signed in to the console; the reflected value can run script in the Collabora Online origin and expose the console authentication token. This issue is fixed in versions 24.04.19.3, 25.04.13.3, and 26.04.3.3. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: kexec_file: Fix elf_headers memory leak in retry loop
A retry allocates new elf headers and overwrites image->elf_headers,
leaking the previous buffer.
Free it before assigning.
[catalin.marinas@arm.com: drop the redundant NULL check before vfree()] |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Clear throttle state when leaving the fair class
Task-based CFS bandwidth throttling removes a task's fair sched_entity
while the scheduler core still considers the task queued. p->throttled
carries the fair-specific state across dequeue/enqueue operations.
DEQUEUE_CLASS removes the task from cfs_rq->throttled_limbo_list
but retains the bit. If the last finite CFS quota is disabled while
the task runs in another class, it is absent from the unthrottle walk and
the bit survives.
Returning to fair while cfs_bandwidth_used() is false then performs a real
fair enqueue with p->throttled still set.
After bandwidth is re-enabled, a class-change dequeue treats the
stale bit as limbo state and skips __dequeue_task(). p->se.on_rq therefore
remains set, and put_prev_task_fair() places the entity in the EEVDF tree
while the task moves to RT. On exit, the fair picker can select the
TASK_DEAD task. __schedule() then returns to do_task_dead(),
which hits BUG().
Keep p->throttled across migrations and group moves, but clear it on
DEQUEUE_CLASS because fair-specific state must not outlive fair-class
membership. A later return to fair uses the normal enqueue path. That path
still respects a throttled cfs_rq.
A KASAN, LOCKDEP and DEBUG_LIST v7.3 kernel reproduced the do_task_dead()
BUG in 3/3 root and 3/3 delegated uid-1000 runs with CapPrm=CapEff=0 and
RLIMIT_RTPRIO=1. The fix passed both matrices plus a 3/3 class-switch
control with bandwidth continuously enabled, without a scheduler warning,
KASAN report, lockdep splat or crash.
An AI coding assistant analyzed the state mismatch and drafted the initial
reproducer, fix candidate and this changelog. The source paths, trigger,
controls and results were rechecked against the cited revisions. |