| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.
NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses
.validation_type, so no validation is applied:
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is
silently cast to u32, so a larger value can bypass the min check:
e.g. 4294967296 == 0x100000000
# ynl --family rt-neigh --do setneightbl \
--json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}'
# ynl --family rt-neigh --dump getneightbl --output-json | \
jq '.[] | select(.name == "arp_cache" and has("config"))
| .parms["interval-probe-time-ms"]'
0
msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is
larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR()
when HZ > 1000 (Alpha, MIPS), and passing a negative integer to
queue_delayed_work(unsigned long delay) causes sign extension,
which wraps around the expiry time to the past, resulting in it
being handled as 0 delay in the timer wheel.
Let's use NLA_POLICY_FULL_RANGE() and limit the max to 1 day.
The same max check is applied to sysctl as well.
Note that this controls the probe interval for NTF_MANAGED
entries, so the max of 1 day is unlikely to break any
deployments. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: mesh: release the channel if start fails
ieee80211_join_mesh() acquires a channel context and then calls
ieee80211_start_mesh(), which can fail. In that case, the chanctx
isn't released then interface removal will attempt to unassign it
after it's removed from the driver, hitting:
wlan0: Failed check-sdata-in-driver check, flags: 0x0
WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx
ieee80211_assign_link_chanctx
__ieee80211_link_release_channel
ieee80211_link_release_channel
ieee80211_teardown_sdata
unregister_netdevice_many_notify
_cfg80211_unregister_wdev
ieee80211_remove_interfaces
ieee80211_unregister_hw
mac80211_hwsim_del_radio
hwsim_exit_net
Correctly release the channel on start failures. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't get the radio mask for netdev-less wdevs
cfg80211_calculate_bi_data() calls rdev_get_radio_mask() with
wdev->netdev, which can be NULL and then crashes in mac80211.
To avoid that, invert the order of checks since wdev->netdev
is always valid for beaconing interfaces. |
| A vulnerability was found in mod_proxy_cluster. The issue is that the <Directory> directive should be replaced by the <Location> directive as the former does not restrict IP/host access as `Require ip IP_ADDRESS` would suggest. This means that anyone with access to the host might send MCMP requests that may result in adding/removing/updating nodes for the balancing. However, this host should not be accessible to the public network as it does not serve the general traffic. |
| A flaw was found in Keycloak. An unauthenticated remote attacker can trigger an application level Denial of Service (DoS) by sending a highly compressed SAMLRequest through the SAML Redirect Binding. The server fails to enforce size limits during DEFLATE decompression, leading to an OutOfMemoryError (OOM) and subsequent process termination. This vulnerability allows an attacker to disrupt the availability of the service. |
| In the StAX streaming WS-SecurityPolicy validator, certain relative or unsupported XPath expressions can be converted into paths that never match the actual XML element path. A remote SOAP peer may therefore send a required element without the expected signature or encryption.
Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue. |
| WSS4J EncryptedHeader child confusion could promote an attacker-controlled plaintext element as the decrypted header, leading to incorrect confidentiality coverage and possible policy bypass.
Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue. |
| In the WSS4J streaming (StAX) code, a signature reference using the WS-Security STR-Transform leaves an internal "inside signed content" flag permanently set. The WS-SecurityPolicy enforcer uses that flag to decide whether an element needs checking, so it stops evaluating SignedParts and SignedElements for the rest of the message. A policy requiring the SOAP Body to be signed is then satisfied even when the Body carries no signature, removing the protection against XML Signature Wrapping. Signature verification itself is unaffected. The DOM code is not affected.
Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4 which fix this issue. |
| An integer overflow in WSS4J's DER bounds check lets an oversized allocation pass validation. An unauthenticated attacker can send a SOAP message carrying an X.509 certificate whose SubjectKeyIdentifier extension declares a length of 0x7FFFFFFF; WSS4J decodes this while resolving the signature's key reference, before the message is authenticated, so an eleven-byte extension triggers a 2 GB allocation. Repeated requests exhaust server memory.
Users are recommended to upgrade to versions 4.0.2 or 3.0.6 or 2.4.4, which fix this issue. |
| Joomla Extension - joomcode.com - Unauthenticated SQL injection in read and write queries in JCTables 1.21.1 - The front-end CRUD API controller performs no Joomla token validation and no authentication check on any task. Table names, column names, and values are taken directly from request parameters and concatenated into SQL queries, allowing SQLi for reading and writing queries. |
| Next.js is a React framework for building full-stack web applications. From 15.0.0 until 15.5.27 and 16.3.8, self-hosted applications using the Pages Router with statically generated or Incremental Static Regeneration pages can key a response cache entry without sufficiently binding it to the source route. A request can replace one page's cache entry with content from a different route, causing the affected page to serve incorrect content to every visitor until revalidation. Applications deployed on Vercel are not affected. This issue is fixed in versions 15.5.27 and 16.3.8. |
| Next.js is a React framework for building full-stack web applications. From 16.0.0 until 16.3.8, Image Optimization can follow attacker-controlled DNS resolution for a remote URL that matches images.remotePatterns, allowing the optimized image fetch to reach private IP addresses after the URL passes the allow-list check. Applications without images.remotePatterns are not affected. Administrators unable to upgrade should audit allow-listed hosts and avoid entries whose DNS records are not trusted. This issue is fixed in version 16.3.8. |
| UTMStack before 11.2.16 contains an account enumeration vulnerability that allows unauthenticated attackers to determine registered email addresses by observing differing HTTP responses from the POST /api/account/reset-password/init endpoint. Attackers can submit arbitrary email addresses and distinguish registered accounts, which return 200 OK, from unregistered accounts, which trigger a 500 Internal Server Error with backend error details, enabling targeted phishing or credential attacks. |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.107.0 until 2.120.3, docling/backend/opendocument_backend.py uses the xlink:href attribute value of a draw:image element as a filesystem path when the referenced part is not found in the document archive. The _image_ref_from_odf_image function reads that attacker-controlled path without a scheme check, extraction-directory confinement, or the enable_local_fetch setting used by other backends. Readable files that Pillow can decode as images are embedded in converted output, and other existing paths can be distinguished through the attempted read. This issue is fixed in 2.120.3. |
| Penpot is an open-source design and prototyping platform. Prior to 2.18.0, the get-page RPC accepts a share-link permission object with blanket read access but does not verify that the caller-selected page-id belongs to the link's authorized pages set. An attacker with both a valid share link and the attacker's own authenticated Penpot session can retrieve the complete shape and design data of another page in the same file when its identifier is known, because get-page requires authentication. The related get-file-fragment RPC also permits share-link access without mapping fragments to authorized pages. This issue is fixed in version 2.18.0. |
| Penpot is an open-source design and prototyping platform. Prior to 2.18.0, the SVG exporter places an attacker-controlled text object's fill-color value into a ppmcolormask command string and executes that string through child_process.exec. A user who can edit a file can store shell metacharacters in the fill color and trigger SVG export, causing commands to execute with the exporter service's privileges. The same export can be triggered through a valid public share link to a malicious file. This vulnerability is fixed in 2.18.0. |
| Penpot is an open-source design and prototyping platform. Prior to 2.18.0, the chunked media upload RPC validates that a chunk index is in range but neither rejects an already stored index nor replaces its previous object. An authenticated user can repeatedly upload the same valid index, causing each successful request to allocate another temporary object and increasing stored bytes beyond the upload session's declared logical size. Assembly detects the inconsistent chunk count only after allocation. This issue is fixed in version 2.18.0. |
| A vulnerability was determined in girishsaraf Online-Appointment-Booking-System up to f427b4757128ca253d33d0cc4e87bbb9c999a4d5. This vulnerability affects unknown code of the file get_town.php of the component AJAX Endpoint. Executing a manipulation of the argument countryid/townid/cid/didval/cidval can lead to sql injection. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was identified in onetwothreeneth HospitalManagementSystem up to 9ef91ed6007314b6473110ed699dff76d158f61d. Affected by this issue is the function get of the file print.php. The manipulation of the argument transaction_id leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| LaraDashboard before 1.4.8 contains an incorrect authorization vulnerability that allows authenticated users with only settings.view permission to read stored secrets through the settings API. Attackers can query GET /api/settings or /api/settings/{option_name} to retrieve plaintext AI provider API keys, mail credentials, passwords and tokens. |
