| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NetBox Device Type Library is a collection of community-sourced device type definitions for import into NetBox. Prior to commit f41fc1e, the CI workflow .github/workflows/validation.yml runs on pull_request and executes code supplied by the pull request before any maintainer review. Three PR-editable files drive this: "requirements.txt", ".pre-commit-hooks-config.yaml" / ".pre-commit-yamlfmt-config.yaml", and ".gitmodules". A contributor with no special repository access could open a pull request that modifies these files and have their code run on the CI runner. This issue has been patched via commit f41fc1e. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: eswin: Zero-initialize stack-allocated clk_init_data
eswin_clk_register_pll() and eswin_register_clkdiv() declare a struct
clk_init_data on the stack and only initialize some of its fields
(parent_data respectively parent_hws). clk_core_populate_parent_map()
checks parent_names first and parent_data second before falling back
to parent_hws, so leftover stack garbage in the uninitialized fields
hijacks parent resolution and the clk core dereferences a bogus
pointer:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000c
Oops [#1]
epc : __clk_register+0x31a/0x7f0
[<ffffffff805dc774>] __clk_register+0x31a/0x7f0
[<ffffffff805dcd76>] devm_clk_hw_register+0x2a/0x94
[<ffffffff805e319a>] eswin_register_clkdiv+0x80/0xd0
[<ffffffff805e34a0>] eswin_clk_register_clks+0x162/0x1a0
[<ffffffff805e3736>] eic7700_clk_probe+0x146/0x180
[<ffffffff8065d23c>] platform_probe+0x3c/0x7a
Observed on EIC7700 hardware (with the driver backported to a 6.17
tree); whether the bug triggers depends entirely on what the stack
happens to contain when the registration helpers run.
Zero-initialize both structures. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in uverbs_free_dmah()
When accessing a dmah via the netlink path the only synchronization
mechanism for the said dmah is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
uverbs_free_dmah(), which is too late, since by that point
vendor-specific resources associated with the dmah might already be
freed. This can leave a short window where the dmah remains accessible
through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_begin_del() call to the start of
uverbs_free_dmah(), ensuring that the dmah is removed from restrack
before its internal resources are released. This guarantees that no new
users hold references to a dmah that is in the process of destruction.
In addition, this change preserves the intended inverted order
between create and destroy routines: resources are added to
restrack at the end of successful creation, and hence shall be removed
from the restrack first thing during the destruction flow, which keeps
the lifecycle management consistent and predictable. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: Fix device_register() error path
When device_register() fails in i3c_master_register_new_i3c_devs(),
put_device() is called to drop the reference taken by
device_register(). That drops the last reference, so the device's
release callback i3c_device_release() runs and frees the i3c_device.
Two problems follow from that:
i3c_device_release() does WARN_ON(i3cdev->desc), so it warns because
desc->dev->desc still points back at the descriptor. Clear it before
calling put_device().
After put_device() frees the i3c_device, desc->dev is left pointing at
freed memory, so clear desc->dev as well. That prevents, for example,
i3c_master_unregister_i3c_devs() seeing desc->dev as non-NULL and
dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: flush pending RCU callbacks on module unload
Call rcu_barrier() in module exit to wait for outstanding call_rcu() callbacks
before freeing module text, preventing late callback execution in freed memory.
BUG: unable to handle page fault for address: ffffffffc1d59c40
PGD 6a12067 P4D 6a12067 PUD 6a14067 PMD 13698b067 PTE 0
Oops: 0010 [#1] SMP NOPTI
RIP: 0010:0xffffffffc1d59c40
Code: Unable to access opcode bytes at RIP 0xffffffffc1d59c16.
RSP: 0018:ffffc900198c0f28 EFLAGS: 00010286
RAX: ffffffffc1d59c40 RBX: ffff897c7d6b61c0 RCX: ffff88826aff4590
RDX: ffff8884d8b35490 RSI: ffffc900198c0f30 RDI: ffff88812af67290
RBP: 000000000000000a (DONE segment entries) R08: 0000000000000000 R09: 0000000000000100
R10: 0000000000000000 R11: ffffffff82a06100 R12: ffff88811a4e3700
R13: 0000000000000000 R14: ffff897c7d6b6270 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff897c7d680000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffc1d59c16 CR3: 00000104a980a001 CR4: 0000000002770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? rcu_do_batch+0x163/0x450
? rcu_core+0x177/0x1c0
? __do_softirq+0xc1/0x280
? asm_call_irq_on_stack+0xf/0x20
</IRQ>
? do_softirq_own_stack+0x37/0x50
? irq_exit_rcu+0xc4/0x100
? sysvec_apic_timer_interrupt+0x36/0x80
? asm_sysvec_apic_timer_interrupt+0x12/0x20
? cpuidle_enter_state+0xd4/0x360
? cpuidle_enter+0x29/0x40
? cpuidle_idle_call+0x108/0x1a0
? do_idle+0x77/0xf0
? cpu_startup_entry+0x19/0x20
? secondary_startup_64_no_verify+0xbf/0xcb
(cherry picked from commit feaa5039f6c12acc9aa934c2d45dcd251a12c69f) |
| In the Linux kernel, the following vulnerability has been resolved:
staging: octeon: add missing napi_disable in cvm_oct_rx_shutdown
cvm_oct_rx_shutdown calls free_irq and netif_napi_del without
disabling the napi instance first. As the free_irq only waits
for completion of hard interrupt handlers, the napi poll
function could still be active. If cvm_oct_remove proceeds to
free the plat structure (which holds the NAPI instances), the
active poll function will access freed memory, resulting in a
use-after-free crash. |
| A code injection vulnerability in WatchGuard Fireware OS's BOVPN Over TLS client configuration handling allows an attacker who controls the remote VPN server to execute arbitrary commands as root on the connecting Firebox. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: flush dirty data before punching a hole
Punching a hole after a large buffered write may leave the range
reported as data. Reproduce it with:
xfs_io -f \
-c "pwrite -b 3m -S 0x61 0 3m" \
-c "fpunch 1m 1m" \
-c "seek -h 0" \
-c "seek -d 1m" \
/mnt/test/repro
Punching 1 MiB at offset 1 MiB should produce:
0 1 MiB 2 MiB 3 MiB
| DATA | HOLE | DATA | EOF
Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF,
and SEEK_DATA(1M) returns 1M.
This happens because a dirty folio spanning the punched range can be
written back after the punch and refill the hole.
Fix this by flushing and waiting for dirty data in the punched range
before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA.
The xfstests generic/539 pass against Samba/ksmbd with this change. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: pcie: null RX pointers after free
When iwl_pcie_tx_init() fails after RX init, nic init unwinds via
iwl_pcie_rx_free().
The freed RX members stayed non-NULL on the live transport object,
so later teardown or retry could touch stale RX state.
Set rx_pool, global_table, rxq, and alloc_page to NULL after free
to make repeated cleanup and retry paths safe. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix addr_filter_ranges lifetime
Lee Jia Jie reported that since event::addr_filter_ranges is used
under RCU, it should be RCU freed. |
| Invalid pointer in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, and Firefox ESR 140.17. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hidpp: fix potential UAF in hidpp_connect_event()
If input_register_device() fails, we call input_free_device(), but keep
stale pointer to the old device in hidpp->input, which could potentially
lead to UAF. Fix that by resetting it to NULL before returning from
hidpp_connect_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move free_irq out of the close-time spinlocked section
au1000_close() calls free_irq() while aup->lock is still held with
spin_lock_irqsave(). free_irq() can sleep because it takes the IRQ
descriptor request mutex, so it does not belong inside the close-time
spinlocked section.
This was found by our static analysis tool and then confirmed by manual
review of the in-tree au1000_close() .ndo_stop path. The reviewed path
keeps aup->lock held across the MAC reset, queue stop and
free_irq(dev->irq, dev).
A directed runtime validation kept that ndo_stop carrier and the same
free_irq(dev->irq, dev) operation under the driver lock. Lockdep reported
"BUG: sleeping function called from invalid context" and "Invalid wait
context" while free_irq() was taking desc->request_mutex, with
au1000_close() and free_irq() on the stack.
Drop aup->lock before freeing the IRQ. The protected close-time work still
stops the device and queue before IRQ teardown, but the sleepable IRQ core
path now runs outside the spinlocked section. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: purge async notifications upon nic error
This fixes a kernel panic in reconfig failure:
1. we have a BSS connection
2. we have a NAN connection
3. FW error occurs
4. reconfig restores the BSS connection
5. however, restoring the NAN connection fails due to a FW error.
6. erroneously, ieee80211_handle_reconfig_failure is called and marks all
interfaces as not-in-driver (will be fixed in a different patch).
7. mac80211 frees the links of the BSS connection but doesn't tell the
driver about that, as it thinks that this vif is not in the driver.
8. in ieee80211_stop_device, *ALL* wiphy works are getting flushed
(erroneously?)
9. Therefore, async_handlers_wk is being executed, processing the
statistics notification that was received after we restored the BSS
connection.
10. the notification handler dereferences fw_id_to_bss_conf[id], which is
now a dangling pointer, as mac80211 already freed this link in (7).
11. On the first access to one of the links fields, we panic.
While this can and should be fixed by removing the call to
ieee80211_handle_reconfig_failure in (6), it is also not a good idea to
carry and maybe handle notifications from a dead FW.
We do purge the notifications when we stop the FW, but in reconfig
failure we stop the FW too late, after the notifications are processed.
In addition, async_handlers_wk can always be scheduled before the
reconfig work.
Purge the notifications immediately when transport notifies about a nic
error. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: quiesce DMA before freeing resources
pdsc_teardown() frees DMA buffers but does not disable bus mastering,
leaving the device able to perform DMA after the buffers are freed.
This can lead to use-after-free if the device writes to freed memory.
Add pci_clear_master() to pdsc_teardown() to disable bus mastering
before freeing resources, ensuring all DMA is quiesced.
Add pci_set_master() to pdsc_setup() to re-enable bus mastering,
which is needed for the firmware recovery path since pdsc_teardown()
now disables it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix UAF race in destroy_queue_cpsch
wait_on_destroy_queue() drops locks to wait for queue resume, allowing
a concurrent destroy to free the queue. Use is_being_destroyed flag to
serialize destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Add validation for node in acpi_ns_build_normalized_path()
Add validation for node in acpi_ns_build_normalized_path()
to prevent use-after-free vulnerabilities. |
| PDFio before 1.6.5 contains a dangling pointer vulnerability in the dictionary string-formatting function that stores a pointer to a stack-local buffer in the document dictionary without copying the string value. In multi-threaded or pooled-request environments, attackers or concurrent users can trigger stack memory reuse across requests, causing cross-tenant document content corruption by silently overwriting one caller's dictionary string values with another caller's data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might remain with
dangling pointers to objects like stations and links (at least for
iwlwifi this is the case).
ieee80211_handle_reconfig_failure is meant to be called after we cleaned
up the state in the driver, there is no reason to call it for NAN
reconfiguration failure.
Fix the code to just warn in such a case, as we do in other error paths
in reconfig where it is too complicated to rewind. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF
A previous commit protected against races between ptdump and CPA collapse,
however one still exists between attribute changes and collapse as reported
by Denis V. Lunev (linked).
When an attribute change arises, a lockless page table walker obtains a PTE
entry, which is later written to via set_pte_atomic():
...
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> _lookup_address_cpa()
-> lookup_address_in_pgd_attr()
-> [ lockless page table walker ]
-> set_pte_atomic()
There is nothing preventing a concurrent CPA collapse which can free the
PTE that was retrieved here, resulting in a use-after-free.
With the mmap write lock taken on init_mm over CPA collapse, resolve this
race by acquiring an mmap read lock on init_mm over
__change_page_attr_set_clr().
This locks across the whole operation over which the walk and the PTE
entry write occurs, solving the race.
It is safe to do this here, as no spinlocks are held upon entry to
__change_page_attr_set_clr().
However, the lock must not be held over an allocation, as allocation can
trigger reclaim and shrinkers may call into CPA recursively, making
deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm).
A page table is allocated when a huge page needs to be split:
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> split_large_page()
[ pagetable_alloc() ]
-> __split_large_page()
Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in
split_large_page() and track whether this is needed by adding a new
'init_mm_read_locked' flag to struct cpa_data.
This is safe as __split_large_page() (called with locks re-established)
revalidates that the page table entry is the same as it was prior to the
locks being dropped and __change_page_attr() repeats the entire page table
walk whenever a split occurs, so concurrent split and collapse are
accounted for.
Concurrent ptdump is also safe as the lock is only dropped over page table
allocation during which time the page table has not yet been modified.
The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively
operates upon vmalloc ranges, and on x86 only within the module mapping
space.
This is important, because some callers directly invoke
__change_page_attr_set_clr(), bypassing this lock. However, none of these
operate within the module mapping space.
* cpa_process_alias() - a recursive helper called by
__change_page_attr_set_clr().
* __set_memory_enc_pgtable() - operates on the direct mapping and (via
__vmbus_establish_gpadl()) the vmalloc mapping space.
* __set_pages_[n]p() - called by set_direct_map_[invalid, default,
valid]_noflush(), __kernel_map_pages() - operates on the direct map.
* kernel_[un]map_pages_in_pgd() - operates on EFI ranges.
This work is based upon Denis V. Lunev's excellent analysis of the bug
with gratitude.
[ dhansen: move to imperative voice in changelog ] |
