| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Enhance buffer validation in acpi_ut_walk_aml_resources()
Enhance buffer validation in acpi_ut_walk_aml_resources() to prevent
buffer overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: add boundary checks in acpi_ps_get_next_field()
Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds
access. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock
The fcport->unsol_ctx_head list is modified from several contexts without
a common lock. Entries are added in qla2xxx_process_purls_iocb() from the
response queue ISR (under the qpair qp_lock), while they are removed from
qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp()
(NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB
completion). The qpair qp_lock cannot serialize this per-fcport list since
multiqueue adapters add entries through different qpairs, so a concurrent
add and delete (or two concurrent deletes) can corrupt the list pointers.
Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in
qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del()
on unsol_ctx_head. The add nests under the existing qp_lock; no delete path
takes qp_lock, so the lock order is consistent and deadlock free. |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: fix cache shrink race with CPU hotplug
kasan_quarantine_remove_cache() first invokes per_cpu_remove_cache() on
all online CPUs. Each callback moves objects belonging to the cache from
cpu_quarantine to the CPU's shrink_qlist, where they can later be freed
from task context.
kmem_cache_destroy() invokes the quarantine removal path while holding
cpus_read_lock(), but kmem_cache_shrink() does not. The latter can
therefore race with CPU offlining as follows:
kmem_cache_shrink() CPU hotplug
------------------- -----------
on_each_cpu()
CPU1 moves objects to
CPU1's shrink_qlist
on_each_cpu() returns
CPU1 goes offline
kasan_cpu_offline()
drains cpu_quarantine
leaves shrink_qlist untouched
for_each_online_cpu()
skips CPU1
The objects left on CPU1's shrink_qlist are not returned to the slab
allocator. This may prevent kmem_cache_shrink() from releasing slabs that
would otherwise become empty. If CPU1 remains offline, a later
kmem_cache_destroy() also skips the list and can report that the cache
still contains objects.
An intermittent occurrence was observed with a virtio-9p filesystem. The
mount and umount commands both returned 0, but the kernel logged the
following during the userspace-triggered teardown:
[ 2994.380134][ T111] BUG 9p-fcall-cache-1 (Tainted: G B ): Objects remaining on __kmem_cache_shutdown()
[ 2994.381140][ T111] Object 0xff11000004361118 @offset=4376
[ 2994.381607][ T111] Allocated in p9_fcall_init+0x201/0x400 age=19564 cpu=1 pid=104
[ 2994.382591][ T111] p9_fcall_init+0x201/0x400
[ 2994.382810][ T111] p9_tag_alloc+0x12f/0x700
[ 2994.382982][ T111] p9_client_prepare_req+0x102/0x3e0
[ 2994.383165][ T111] p9_client_rpc+0x1ab/0xa50
[ 2994.383334][ T111] p9_client_getattr_dotl+0xb0/0x1a0
[ 2994.383515][ T111] v9fs_vfs_getattr_dotl+0x115/0x360
[ 2994.383719][ T111] vfs_getattr_nosec+0x22c/0x3a0
[ 2994.383910][ T111] vfs_statx+0xd7/0x170
[ 2994.384062][ T111] vfs_fstatat+0x45/0x80
[ 2994.384215][ T111] __do_sys_newfstatat+0x84/0xe0
[ 2994.384386][ T111] do_syscall_64+0x115/0x6a0
[ 2994.384566][ T111] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2994.399720][ T111] WARNING: mm/slub.c:1244 at __kmem_cache_shutdown+0x363/0x500, CPU#0: busybox/111
[ 2994.405655][ T111] Call Trace:
[ 2994.406325][ T111] kmem_cache_destroy+0x73/0x1b0
[ 2994.406630][ T111] p9_client_destroy+0x271/0x3c0
[ 2994.407210][ T111] v9fs_session_close+0x3c/0x260
[ 2994.407409][ T111] v9fs_kill_super+0x48/0x90
[ 2994.407584][ T111] deactivate_locked_super+0xa3/0x160
[ 2994.407778][ T111] cleanup_mnt+0x1dd/0x3e0
Thus, a successful umount left objects in the 9p fcall cache and prevented
the cache from being destroyed cleanly.
Per-CPU shrink_qlist storage exists for every possible CPU, and each list
is protected by its own raw spinlock. Iterate over possible CPUs so that
a list populated before its CPU went offline is drained as well.
for_each_possible_cpu() can do more work than for_each_online_cpu(), but
this change only affects CONFIG_KASAN_GENERIC kernels. The extra work is
limited to cache shrink and cache destruction paths and does not affect
the normal allocation/free fast path. It adds one raw-spinlock-protected
scan of each possible CPU's shrink list. These lists are normally empty;
a non-empty list is traversed to remove objects belonging to the cache
being shrunk or destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_core: use skb_get() instead of skb_clone() for req_skb
BT enable fails intermittently with -ETIMEDOUT (-110). The kernel log
shows the HCI Read Local Version command was sent and the firmware
replied with status 0x00 (logged by hci_req_cmd_complete() BT_DBG),
but the waiter in __hci_cmd_sync_sk() never woke up and timed out
after 10 s:
bluetooth hci0: Opcode 0xfc00 // __hci_cmd_sync_sk
bluetooth hci0: opcode 0xfc00 plen 1 // hci_cmd_sync_add
bluetooth hci0: skb len 4 // hci_cmd_sync_alloc
bluetooth hci0: length 1 // hci_req_sync_run
Bluetooth: hci0 cmd_cnt 1 cmd queued 1 // hci_cmd_work
Bluetooth: hci0 type 1 len 4 // hci_send_frame
Bluetooth: opcode 0xfc00 status 0x00 // hci_req_cmd_complete
<-- req_skb NULL: req_complete_skb not set,
hci_cmd_sync_complete() never called,
req_status stays HCI_REQ_PEND -->
<-- 10 s later: wait_event_interruptible_timeout expires -->
bluetooth hci0: end: err -110 // __hci_cmd_sync_sk
The root cause is that hci_send_cmd_sync() clones the sent command
into hdev->req_skb so that hci_req_cmd_complete() can locate the
registered completion callback. Under memory pressure this
skb_clone() fails, leaving hdev->req_skb NULL. The firmware reply
is received and processed, but hci_req_cmd_complete() finds NULL
req_skb, so hci_cmd_sync_complete() is never called, req_status
stays HCI_REQ_PEND, and the waiter times out with -ETIMEDOUT.
req_skb is only used to read bt_cb(skb)->hci callbacks and opcode --
it is never modified. Replace skb_clone() with skb_get(), which
simply increments the reference count of hdev->sent_cmd without
allocating new memory and therefore cannot fail.
This issue was first observed as a use-after-free in ttyport_close()
when ttyport_open() failed, which was investigated in an earlier
patch series [1]. That investigation led to the discovery of the
true root cause described above.
[1] https://lore.kernel.org/all/20250430111617.1151390-1-quic_cxin@quicinc.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden DFS cache against invalid target hints
Currently, get_tgt_name() returns ERR_PTR(-ENOENT) when ce->tgthint is
NULL, and dfs_cache_noreq_update_tgthint() assumes ce->tgthint is always
valid.
In preparation for clearing ce->tgthint in free_tgts(), harden callers
of get_tgt_name() against ERR_PTR results and harden
dfs_cache_noreq_update_tgthint() against NULL pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
cdx: Fix double free when sysfs file creation fails
In cdx_create_res_attr(), if sysfs_create_bin_file() fails, the code
frees res_attr but doesn't set cdx_dev->res_attr[num] to NULL. This
leaves a dangling pointer in the array. Then cdx_destroy_res_attr()
frees the already-freed memory. Fix the double free by initializing
cdx_dev->res_attr[num] after sysfs_create_bin_file() completes. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: skip device-private PMDs in madvise_free_huge_pmd
madvise_free_pte_range() checks pmd_trans_huge(*pmd) unlocked, then
madvise_free_huge_pmd() takes pmd_trans_huge_lock(). pmd_is_huge()
returns true for a device-private PMD, so orig_pmd can be device-private
and enter the !pmd_present() branch.
Skip device-private PMDs in that non-present branch and continue to out
before calling pmd_folio(). Downgrade the check to VM_WARN_ON_ONCE() so
an unexpected PMD softleaf logs a warning rather than panicking. Drop the
thp_migration_supported() guard: it expands to
IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_SOFTLEAF), and both
pmd_is_migration_entry() and pmd_is_device_private_entry() already return
false when that config is not selected, so the guard suppresses only the
case where the warning would already be silent.
Potential trigger: an HMM-based GPU driver races with madvise(MADV_FREE):
migrate_vma_pages() flips the PMD to a device-private entry between the
caller's pmd_trans_huge() check and the callee's pmd_trans_huge_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep refcount_acquire nullable for borrowed RCU kptrs
bpf_refcount_acquire() is fallible for a borrowed reference because the
object may have reached a zero refcount. The verifier therefore keeps
KF_RET_NULL on the return value unless the argument is an owning reference.
An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only
receives NON_OWN_REF when the pointee contains a graph node. A refcounted
object without a graph node consequently looks like an owning reference
even though the loaded register has no acquired reference state. If the
program drops the last real reference while remaining in the RCU critical
section, refcount_inc_not_zero() returns NULL while the verifier treats the
result as non-NULL.
Only classify the argument as owning when it is backed by a verifier-tracked
reference. This retains the non-NULL return for pointers from bpf_obj_new(),
bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a
NULL check for borrowed RCU kptrs.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mm_init: deferred_grow_zone(): fix out-of-range first_deferred_pfn
With CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled, deferred_grow_zone()
initializes struct pages early in boot to satisfy an allocation.
With a large CMA reservation in place, the ranges deferred_init_memmap()
finds may not add up to the allocation it was asked for, and the function
ends up initializing the memory map of the entire zone and still falls
short.
That is fine in itself: the function accounts for it and leaves the
caller to decide whether it now has enough memory.
However, the update of pgdat->first_deferred_pfn that tracks where
uninitialized memory map starts could overflow.
If the node's RAM end is not aligned on PAGES_PER_SECTION boundaries and
some deferred struct pages were initialized, pgdat->first_deferred_pfn
would point past the end of the node's memory.
deferred_init_memmap() later picks up from pgdat->first_deferred_pfn and
hits a BUG_ON(), because it expects a pfn within its node.
For example, when running a kernel with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
and CONFIG_CMA=y using the following qemu command line
qemu-system-x86_64 -enable-kvm -m 8032M -kernel bzImage \
-append "nokaslr cma=4768M@0x100000000"
the kernel panics:
kernel BUG at mm/mm_init.c:2131!
CPU: 3 UID: 0 PID: 36 Comm: pgdatinit0 Not tainted 7.2.0-rc6 #1
RIP: 0010:deferred_init_memmap+0x1b8/0x1c0
RAX: 0000000000236000 R13: 0000000000238000
Call Trace:
kthread+0xdf/0x120
ret_from_fork+0x187/0x250
Make sure that the update of pgdta->first_deferred_pfn does not overflow
when the entire zone's (and therefore node's) memory map is initialized.
[rppt: massaged the changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: add missing read barrier to rpc_status_get dumpit seqcount retry
The hand-rolled seqcount-like protocol in nfsd_nl_rpc_status_get_dumpit()
is missing a read memory barrier (smp_rmb) before its second counter
check. The standard kernel read_seqcount_retry() includes smp_rmb()
to ensure that all data reads complete before the counter is re-checked.
Without this barrier, on weakly-ordered architectures (ARM, POWER),
the CPU may reorder field reads past the second counter check, making
the retry logic ineffective: it could observe a consistent counter pair
while reading fields that have been concurrently modified by the writer.
Add smp_rmb() before the second counter check to order the field reads
ahead of it, matching the barrier semantics of the standard seqcount
read-side. The begin-side smp_load_acquire() already pairs with the
smp_store_release() in nfsd_dispatch(); with the smp_rmb() now ordering
the field reads, the retry check no longer needs acquire semantics and
reads the counter with a plain READ_ONCE(), as read_seqcount_retry()
does.
[ cel: Use READ_ONCE instead of smp_load_acquire() ] |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF
ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed
by the subvolume name. Several readers assume that this layout is already
valid and then use the on-disk name length directly. A corrupted item can
therefore make those readers address bytes outside the item, and
BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI
name buffer.
Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader
uses them. Reject records that do not contain a non-empty name, whose
name_len does not exactly describe the remaining item payload, or whose
name exceeds BTRFS_NAME_LEN.
For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len
instead of deriving the copy length from the item size. The ioctl result is
zeroed when allocated. That leaves the existing trailing zero byte
untouched. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: validate FDP configuration descriptor sizes
Validate descriptor sizes while walking the FDP configurations log so
dsze == 0 or a descriptor past the log end cannot cause unbounded
iteration or reads past the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: fix out-of-bounds read in ntfs_dir_emit() and hdr_find_e()
The bounds check in ntfs_dir_emit() compares fname->name_len (a
character count) against e->size (a byte count) without accounting
for the 2-byte-per-character UTF-16LE encoding or the ATTR_FILE_NAME
header size:
if (fname->name_len + sizeof(struct NTFS_DE) > le16_to_cpu(e->size))
This computes: name_len + 16 > e_size
The correct check must account for the ATTR_FILE_NAME header (66 bytes
before the name) and the UTF-16LE character size (2 bytes each):
sizeof(NTFS_DE) + offsetof(ATTR_FILE_NAME, name) +
name_len * sizeof(short) > e_size
Which computes: 16 + 66 + name_len * 2 > e_size
The correct calculation already exists as fname_full_size() in ntfs.h
and is used in cmp_fnames(), namei.c, and fslog.c, but was not used
in the readdir path.
A crafted NTFS image with an index entry containing a small e->size
but large fname->name_len bypasses the current check, causing
ntfs_utf16_to_nls() to read past the entry boundary.
Additionally, add a key_size validation in hdr_find_e() to ensure the
declared key_size does not exceed the available entry data, preventing
comparison functions from reading past entry boundaries on the lookup
path. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Bound SW TPA IDs to prevent crashes
FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range
0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for
57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a
software ID which is used to index rxr->rx_tpa, and to generate a mapping
between FW IDs and the wrapped software ID.
On a 57608 with firmware version 233, the firmware advertises 32
concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC
is set to 32.
If the software ID from bnxt_alloc_agg_idx is above 31, this results in
an invalid address being loaded on this line:
tpa_info = &rxr->rx_tpa[agg_id];
because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes
to tpa_info later in the code are out of bounds.
This bug results in a crash at boot:
Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI
RIP: 0010:bnxt_rx_pkt+0xc0/0x1560
RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516
RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0
RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048
R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516
R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680
FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? __netif_receive_skb_list_core+0x1ca/0x250
__bnxt_poll_work+0x152/0x280
bnxt_poll_p5+0x1cd/0x480
__napi_poll+0x30/0x180
net_rx_action+0x20b/0x3b0
? note_gp_changes+0x53/0xe0
? tick_setup_sched_timer+0x180/0x180
? __napi_schedule+0x9a/0xb0
? bnxt_msix+0x24/0x30
handle_softirqs+0xdd/0x2c0
__irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0
common_interrupt+0x85/0x90
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
This stack trace is from a crash triggered when an out of bounds rx_tpa
is dereferenced. The invalid write mentioned above is silent in this
particular crash.
Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next
power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID
with that size, so the wrapped ID can never index past the end of the
array. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_log: unregister loggers before per-net teardown
nf_log_syslog and nfnetlink_log unregister their per-network namespace
operations before unregistering their global logger backends. This
leaves a window where a sysctl or netlink writer can rebind the still-
registered logger after the per-net pre-exit callback cleared the old
selection.
The race looks like this:
CPU 0 CPU 1
---- ----
unregister_pernet_subsys()
nf_log_unset(net, logger)
net->nf.nf_loggers[pf] = NULL
lock nf_log_mutex
find logger in loggers[][]
net->nf.nf_loggers[pf] = logger
unlock nf_log_mutex
nf_log_unregister(logger)
lock nf_log_mutex
loggers[pf][type] = NULL
unlock nf_log_mutex
synchronize_rcu()
module exit returns
module core frees backend memory
Later, a sysctl read or packet logging operation can dereference the
stale per-net logger pointer.
Fix this by unregistering the global logger backends before tearing down
per-net state. Once the global registrations are gone, later writers can
no longer rebind the logger. unregister_pernet_subsys() already waits
for an RCU grace period after the pre-exit callback clears the per-net
selection, while nf_log_unregister() continues to cover readers of the
global logger table.
Apply this ordering fix to both nf_log backends that combine per-net
teardown with global logger registration. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix use-after-free of the flow table mask array
tbl_mask_array_realloc() retires the old mask_array before it stops being
reachable:
old = ovsl_dereference(tbl->mask_array);
if (old) {
...
call_rcu(&old->rcu, mask_array_rcu_cb);
}
rcu_assign_pointer(tbl->mask_array, new);
call_rcu() only waits for read-side critical sections already in flight.
tbl->mask_array still points at old between the call_rcu() and the
rcu_assign_pointer(), so a reader entering ovs_flow_tbl_lookup_stats() in
that window picks up old in a fresh critical section that the pending
grace period does not cover.
tbl_mask_array_realloc() runs in process context under ovs_mutex, so the
window is preemptible and can outlast the grace period. Then
mask_array_rcu_cb() frees old before the swap runs:
BUG: KASAN: slab-use-after-free in flow_lookup.constprop.0+0x2bf/0x2f0
Read of size 8 at addr ffff888020b3e018 by task poc/741
flow_lookup.constprop.0+0x2bf/0x2f0
ovs_flow_tbl_lookup_stats+0x4a3/0x5c0
ovs_dp_process_packet+0x19c/0x710
ovs_vport_receive+0x243/0x390
internal_dev_xmit+0x81/0x170
Freed by task 728:
kfree+0x16a/0x4e0
rcu_core+0x853/0x1030
Publish the new array before retiring the old one. The kfree_rcu() that
call_rcu() replaced ran after the swap. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Update last skb marker in manage_oob().
Fahad Alharbi reported that blocking recv(MSG_PEEK) could hog CPU
due to OOB skb.
In the following cases, manage_oob() skips OOB skb(s) and returns
NULL for the last recv(MSG_PEEK):
socketpair(AF_UNIX, SOCK_STREAM, 0, sk);
1) skb -> OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
2) skb -> consumed OOB skb -> NULL
send(sk[0], "ab", 2, MSG_OOB);
recv(sk[1], buf, 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_PEEK);
3) consumed OOB skb -> OOB skb -> NULL
send(sk[0], "a", 1, MSG_OOB);
recv(sk[1], buf, 0, MSG_OOB);
send(sk[0], "b", 1, MSG_OOB);
recv(sk[1], buf, 1, MSG_PEEK);
Then, @copied is 0 in unix_stream_read_generic() (zero-length buffer,
or non-OOB skb is not yet consumed), and unix_stream_data_wait() is
called.
However, it returns immediately because @last is not updated in
unix_stream_read_generic(), and the thread busy-waits for a new skb.
Let's update @last in manage_oob().
For MSG_PEEK, @last is updated with the skipped OOB, and for the
non-peek case, @last matches the returned value (when !copied)
because OOB is unlinked.
Note that manage_oob() is inlined and no stack canary is added. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Support CPU hotplug for PMU PAI
The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>'
crashes the kernel when CPUs are hotplug added during that run.
Root cause is the missing allocation of per-CPU data structures
for that new CPU. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
Currently without a CPU hotplug handler, that new CPU has no
per-CPU data infrastructure. The scheduler runs PMU call back
function pai_add() to install the PMU support for that CPU before
the task is being scheduled on that new CPU.
In pai_add() instructions
mp = this_cpu_ptr(pai_root[idx].mapptr);
cpump = mp->mapptr;
return a NULL pointer and the result is a kernel panic as variable
cpump is used inside that function.
Add CPU hotplug support for CPU add and delete and create
the necessary per-CPU data infrastructure during CPU hotplug
add processing. Same for CPU hotplug remove.
This is done when the CPU is offline to ensure the data structures
are available when CPU is made online and tasks are scheduled on it.
[hca@linux.ibm.com: fixup error path in pai_init()] |
