| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: davinci: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_threaded_irq(). During
removal, spi_bitbang_stop() only unregisters the controller; the
subsequent spi_controller_put() then frees the controller together with
its embedded davinci_spi devdata, which is the IRQ handler's dev_id.
The devm_request_threaded_irq() release action (free_irq()), which
drains the handler, does not run until after .remove() returns. A late
or latched interrupt can therefore reach davinci_spi_irq() and
dereference already-freed memory.
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
The clock is acquired with devm_clk_get_enabled(), which is registered
after the IRQ and thus released before it by the devres LIFO order.
Drain the interrupt explicitly with devm_free_irq() before disabling the
controller so that a late interrupt cannot access the registers of a
clock-gated controller.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: Prevent crash handling to race with rproc_del()
There's no synchronization between rproc_crash_handler_work() and
rproc_del(), as such it's possible for a driver to be removed while
crash-handler work is scheduled, or even executing - resulting in
use-after-free issues.
To avoid this the scheduled work need to be cancelled and synchronized
against before the removal proceeds.
In order to ensure that this doesn't race with the reporting, and
thereby scheduling new work, a "deleting" flag is introduced. This is
similar to the RPROC_DELETE state that was introduced to ensure that
"start" didn't race with rproc_del(), but the existing mechanism can not
be used as it's valid to call rproc_report_crash() in atomic context -
and the "state" is protected by a mutex.
In the event that work is cancelled the pm_stay_awake() is left
unbalanced and need to be unrolled.
The blocking and cancelling of crash-handler work prior to the actual
rproc_shutdown() call does have the explicit side-effect that crashes
resulting from the shutdown process will not enter the crash-handling
path, and as such will not generate devcoredumps etc. Due to the
existing mutual exclusion between these code paths there's no concrete
reduction in functionality, but further work would be needed to handle
this case. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: oc-tiny: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_irq(). During removal,
spi_bitbang_stop() only unregisters the controller; the subsequent
spi_controller_put() then frees the controller together with its
embedded driver-private devdata, which is the IRQ handler's dev_id. The
devm_request_irq() release action (free_irq()), which drains the
handler, does not run until after .remove() returns. A late or latched
interrupt can therefore reach tiny_spi_irq() and dereference
already-freed memory (e.g. hw->base).
Switch to devm_spi_alloc_host() so that the devres LIFO order releases
the controller only after free_irq() has drained the handler, and drop
the now-redundant spi_controller_put() from .remove(). The probe error
path is simplified to direct returns.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unrequest devices if driver registration fails
scmi_driver_register() requests protocol devices before registering the
driver. If driver_register() fails, those requests remain in the global
IDR and retain pointers to the module's ID table. Once the failed module
load releases that storage, later request matching or SCMI device creation
can dereference the stale pointers.
Unrequest the complete protocol table before returning the registration
failure. At this point table registration succeeded, so every entry is
owned by the current registration attempt. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in counter_release()
When accessing a counter via the netlink path the only synchronization
mechanism for the said counter is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
counter_release(), which is too late, since by that point
vendor-specific resources associated with the counter might already be
freed. This can leave a short window where the counter remains
accessible through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the
freeing of the vendor-specific resources, ensuring that the counter is
removed from restrack before its internal resources are released.
This guarantees that no new users hold references to a counter that is
in the process of destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: sc2731_charger: cancel work on remove
The USB notifier and initial charger detection can schedule info->work.
The remove path unregisters the notifier, but does not cancel queued or
running work before the devm-allocated driver data is released.
Set the platform drvdata used by remove, then cancel the work after
unregistering the notifier.
This issue was found by a static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Fix CEQ tasklet use-after-free on removal
Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls
erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring
through get_next_valid_eqe() and updates eq->dbrec through notify_eq().
erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ.
free_irq() prevents another hard IRQ and waits for an in-flight handler,
but it does not drain a tasklet that the handler already scheduled. The
tasklet can therefore access eq->qbuf or eq->dbrec after
erdma_eq_destroy() frees them.
Clearing ceq_cb->ready does not synchronize with a tasklet that already
passed the check at the start of erdma_ceq_completion_handler().
Kill the tasklet after free_irq(), when no handler can schedule it again,
and before erdma_ceq_uninit_one() releases the EQ buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
acpi_pci_root_add() assigns the freshly allocated root to
device->driver_data before dmar_device_add() and pci_acpi_scan_root().
Both failure paths reach the end: label where root is kfree()'d, but
only the pci_acpi_scan_root() path clears driver_data first.
When dmar_device_add() fails during a hot-add, root is freed while
device->driver_data still points at it. The ACPI core does not clear
driver_data on attach failure, so a later acpi_pci_find_root() call may
dereference this dangling pointer.
acpi_pci_root_remove() has the same problem: it frees root without
clearing device->driver_data, leaving a dangling pointer behind after
the root bridge is removed.
Move the NULL assignment to the shared end: label so every error path in
acpi_pci_root_add() clears driver_data before freeing root, and clear it
in acpi_pci_root_remove() as well, so the object is never left reachable
through driver_data after being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: fix use after free on error path in a6xx_gpu_init()
The a6xx_destroy() function frees "a6xx_gpu" and so "adreno_gpu" points
to freed memory. Preserve the error code before freeing the memory to
avoid a use after free.
Patchwork: https://patchwork.freedesktop.org/patch/732275/ |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when dynids.lock is held,
as remove_id_store() can free the node. Thus, make a copy in
pci_match_device(). Also, clarify that the id parameter is only valid
during probe. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix skb double-free in xfrm_dev_direct_output()
A return value other than 1 from local_out() means that the skb has been
consumed or its ownership was transferred. xfrm_dev_direct_output()
nevertheless frees the skb on this path, causing a double-free when
netfilter drops the packet and invalidating any other owner.
Return the local_out() result directly, matching the ownership handling
in xfrm_output_resume(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: dw_dp: Release core resources
Core resources such as the DisplayPort AUX channel get initialized and
registered during dw_dp_bind(), but are never unregistered, which may
lead to memory leaks and/or use-after-free:
[ 224.661371] BUG: KASAN: slab-use-after-free in device_is_dependent+0xe0/0x2b0
[ 224.662015] Read of size 8 at addr ffff00011aee8550 by task modprobe/658
[ 224.662612]
[ 224.662752] CPU: 7 UID: 0 PID: 658 Comm: modprobe Not tainted 7.0.0-rc2-next-20260305 #14 PREEMPT
[ 224.662759] Hardware name: Radxa ROCK 5B (DT)
[ 224.662762] Call trace:
[ 224.662764] show_stack+0x20/0x38 (C)
[ 224.662772] dump_stack_lvl+0x6c/0x98
[ 224.662777] print_report+0x160/0x4b8
[ 224.662783] kasan_report+0xb4/0xe0
[ 224.662790] __asan_report_load8_noabort+0x20/0x30
[ 224.662796] device_is_dependent+0xe0/0x2b0
[ 224.662802] device_is_dependent+0x108/0x2b0
[ 224.662808] device_link_add+0x1f8/0x10b0
[ 224.662813] devm_of_phy_get_by_index+0x120/0x200
[ 224.662819] dw_dp_bind+0x34c/0xb10 [dw_dp]
[ 224.662830] dw_dp_rockchip_bind+0x194/0x250 [rockchipdrm]
[ 224.662864] component_bind_all+0x3a8/0x720
[ 224.662869] rockchip_drm_bind+0x120/0x390 [rockchipdrm]
[ 224.662899] try_to_bring_up_aggregate_device+0x76c/0x838
[ 224.662904] component_master_add_with_match+0x1f4/0x230
[ 224.662909] rockchip_drm_platform_probe+0x420/0x538 [rockchipdrm]
[ 224.662939] platform_probe+0xe8/0x168
[ 224.662945] really_probe+0x340/0x828
[ 224.662950] __driver_probe_device+0x2e0/0x350
[ 224.662954] driver_probe_device+0x80/0x140
[ 224.662959] __driver_attach+0x398/0x460
[ 224.662964] bus_for_each_dev+0xe0/0x198
[ 224.662968] driver_attach+0x50/0x68
[ 224.662972] bus_add_driver+0x2a0/0x4c0
[ 224.662977] driver_register+0x294/0x360
[ 224.662982] __platform_driver_register+0x7c/0x98
[ 224.662987] rockchip_drm_init+0xc4/0xff8 [rockchipdrm]
Since a previous commit exported dw_dp_unbind() function in DW DP core
library to take care of the necessary cleanup, use this in the
component's unbind() callback, as well as in its bind() error path. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix use-after-free in find_pos_and_ways() error path
The error path releases its reference to a switch decoder before
logging an error that includes the decoder name. If the released
reference is the last one, the decoder can be freed before the error
message accesses its name.
Drop the reference after the error is reported. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Roll back partial protocol table registration
scmi_protocol_table_register() can leave earlier requests registered when
a later entry in the same ID table fails. Each request retains a pointer
to the driver's ID table, so a failed module load can leave a dangling
pointer after the module storage is released.
Unrequest only the successfully registered prefix, in reverse order,
before returning the failure. Leave the failed entry and the remaining
entries untouched because matching requests can be owned by another
driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: validate readdir offset before accessing dirent
A corrupted directory can trigger the following KASAN report when
ext4_readdir() resumes from an invalid position:
BUG: KASAN: use-after-free in __ext4_check_dir_entry+0x5ef/0x820
Read of size 2 at addr ffff88810a646000 by task repro_linear/509
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xd0/0x630
kasan_report+0xce/0x100
__ext4_check_dir_entry+0x5ef/0x820
ext4_readdir+0xcde/0x2b70
iterate_dir+0x1a1/0x520
__x64_sys_getdents64+0x12b/0x220
do_syscall_64+0xf9/0x540
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
KASAN reports use-after-free because the out-of-bounds access lands in an
adjacent freed page. The directory buffer itself is still referenced.
ext4_dir_llseek() invalidates the directory cookie so that ext4_readdir()
rescans directory entries from the start of the block. The rescan checks
only the lower bound of rec_len before advancing. A corrupted rec_len can
therefore place the offset where the block has insufficient space for a
complete directory entry. The rescan itself may dereference that truncated
entry, or the main loop may pass it to __ext4_check_dir_entry(). The latter
reads de->rec_len before validating the range. For example:
block offset 0 4092 4096
|---- de1.rec_len = 4092 -----|----|
de2.inode
| de2.rec_len
^ OOB, reported as UAF
de2 starts at offset 4092 in this 4 KiB block. Its four-byte inode fits in
the block, but its rec_len starts at offset 4096 and crosses the boundary.
The minimum safe length is inode-dependent. Encrypted and casefolded
directory entries need eight additional hash bytes, while a valid metadata
checksum tail is only 12 bytes.
Cache the metadata checksum feature state and derive the minimum directory
entry length from the on-disk format. Use it to bound both the rescan and
the offset passed to the main loop. Report an offset in a truncated block
tail and skip the remainder of the block, while continuing to accept an
offset exactly at the block boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unregister device notifier before IDR teardown
The requested-devices notifier looks up protocol fwnodes from the
active_protocols IDR. During remove, unregister the notifier before
releasing and destroying active_protocols so no notifier callback can race
with the IDR teardown.
Keep the bus notifier registered until after the protocol state is torn
down, matching the existing remove ordering for SCMI bus users. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: clear pgmap ops and owner on unbind
fsdev_dax_probe() sets pgmap->ops = &fsdev_pagemap_ops and
pgmap->owner = dev_dax, but nothing ever clears them. For a dynamic
device the pgmap is devm-allocated and freed on unbind, so this is
harmless. For a static device the pgmap is the shared, long-lived one
owned by the dax bus (kill_dev_dax() only NULLs dev_dax->pgmap for the
non-static case), and device.c's probe sets only pgmap->type, never
clearing ops/owner.
So after fsdev unbinds a static device the stale fsdev_pagemap_ops
survives on the shared pgmap. If the device is then rebound to
device_dax (MEMORY_DEVICE_GENERIC, which installs no ->memory_failure),
or the fsdev_dax module is unloaded, a subsequent memory_failure on that
pgmap dispatches through the stale -- and possibly freed -- handler.
Register a devm action that clears pgmap->ops and pgmap->owner on unbind,
symmetric with setting them at probe, so the pgmap carries no fsdev state
once fsdev is detached. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Quiesce notifications before teardown
scmi_notification_exit() clears and releases the notification instance,
but transport callbacks can still deliver incoming notifications until
the TX/RX channels are freed. During remove, an RX interrupt in that
window can enter scmi_notify() while notification state is being torn
down and then dereference freed memory. The same ordering exists on the
probe error path after notification initialization.
The notification late-init worker has a separate lifetime issue: protocol
event registration queues ni->init_work on the system workqueue, so
destroying ni->notify_wq does not drain that work. If the devres group is
released while init_work is still pending or running, the late-init worker
can dereference the freed notification instance.
Quiesce the notification core before TX/RX channels are torn down, then
clean up the channels before releasing the notification core resources.
Use disable_work_sync() so future late-init queueing is rejected and any
already queued or running late-init work has completed before channel
teardown starts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix dp_link_peer dangling references on AP vdev rollback
ath12k_mac_vdev_create() for an AP vdev creates the bss self-peer via
ath12k_peer_create(), which finishes by calling
ath12k_dp_link_peer_assign() to publish the dp_link_peer in the
dp_hw->dp_peers[peerid_index] RCU table, in the dp_peer's
link_peers[] array, and in the per-addr rhashtable.
If a step after ath12k_peer_create() fails the function jumps to
err_peer_del, which open-codes a WMI peer_delete and waits for the
unmap / delete_resp events. The wait_for_peer_delete_done() path
relies on ath12k_dp_link_peer_unmap_event() freeing the dp_link_peer
when the unmap arrives, but err_peer_del never calls
ath12k_dp_link_peer_unassign() first. The published references in
the dp_hw RCU table, dp_peer->link_peers[] and the rhashtable are
left pointing at the dp_link_peer that unmap_event then frees,
producing dangling pointers and use-after-free on subsequent
lookups.
Replace the open-coded sequence with a call to ath12k_peer_delete(),
which already does ath12k_dp_link_peer_unassign() before sending the
WMI command. This drops the published references before the
dp_link_peer is freed, in the same order as the normal teardown path
in ath12k_mac_remove_link_interface().
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
