| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: purge async notifications upon nic error
This fixes a kernel panic in reconfig failure:
1. we have a BSS connection
2. we have a NAN connection
3. FW error occurs
4. reconfig restores the BSS connection
5. however, restoring the NAN connection fails due to a FW error.
6. erroneously, ieee80211_handle_reconfig_failure is called and marks all
interfaces as not-in-driver (will be fixed in a different patch).
7. mac80211 frees the links of the BSS connection but doesn't tell the
driver about that, as it thinks that this vif is not in the driver.
8. in ieee80211_stop_device, *ALL* wiphy works are getting flushed
(erroneously?)
9. Therefore, async_handlers_wk is being executed, processing the
statistics notification that was received after we restored the BSS
connection.
10. the notification handler dereferences fw_id_to_bss_conf[id], which is
now a dangling pointer, as mac80211 already freed this link in (7).
11. On the first access to one of the links fields, we panic.
While this can and should be fixed by removing the call to
ieee80211_handle_reconfig_failure in (6), it is also not a good idea to
carry and maybe handle notifications from a dead FW.
We do purge the notifications when we stop the FW, but in reconfig
failure we stop the FW too late, after the notifications are processed.
In addition, async_handlers_wk can always be scheduled before the
reconfig work.
Purge the notifications immediately when transport notifies about a nic
error. |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
driver_detach+0xa0/0x12c
bus_remove_driver+0x6c/0xbc
driver_unregister+0x30/0x60
pci_unregister_driver+0x20/0x9c
lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci]
This warning is triggered when a consumer is removed because the links
status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag
DL_FLAG_SYNC_STATE_ONLY is not set.
The topology in terms of consumers/suppliers used was the following
(consumer ---> supplier):
i2c -----------> OIC ----> PCI device
| ^
| |
+---> pinctrl ---+
When the PCI device is removed, the OIC (interrupt controller) has to be
removed. In order to remove the OIC, pinctrl and i2c need to be removed
and to remove pinctrl, i2c need to be removed. The removal order is:
1) i2c
2) pinctrl
3) OIC
4) PCI device
In details, the removal sequence is the following (with 0000:01:00.0 the
PCI device):
driver_detach: call device_release_driver_internal(0000:01:00.0)...
device_links_busy(0000:01:00.0):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(0000:01:00.0):
0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(oic)...
device_links_busy(oic):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(oic):
oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(pinctrl)...
device_links_busy(pinctrl):
links->status = DL_DEV_UNBINDING
device_links_unbind_consumers(pinctrl):
pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND
call device_release_driver_internal(i2c)...
device_links_busy(i2c): links->status = DL_DEV_UNBINDING
__device_links_no_driver(i2c)...
pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND
oic--i2c link->status is DL_STATE_ACTIVE
oic--i2c link->supplier->links.status is DL_DEV_UNBINDING
The warning is triggered by the i2c removal because the OIC (supplier)
links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set
to DL_DEV_UNBINDING.
It is perfectly legit to have the links status set to DL_DEV_UNBINDING
in that case. Indeed we had started to unbind the OIC which triggered
the consumer unbinding and didn't finish yet when the i2c is unbound.
Avoid the warning when the supplier links status is set to
DL_DEV_UNBINDING and thus support this removal sequence without any
warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: quiesce DMA before freeing resources
pdsc_teardown() frees DMA buffers but does not disable bus mastering,
leaving the device able to perform DMA after the buffers are freed.
This can lead to use-after-free if the device writes to freed memory.
Add pci_clear_master() to pdsc_teardown() to disable bus mastering
before freeing resources, ensuring all DMA is quiesced.
Add pci_set_master() to pdsc_setup() to re-enable bus mastering,
which is needed for the firmware recovery path since pdsc_teardown()
now disables it. |
| IBM Guardium Data Protection 12.2 is vulnerable to path traversal and arbitrary file deletion in the Datasource REST component. An authenticated remote attacker could exploit this vulnerability to delete files and potentially cause denial of service or impact system integrity. |
| IBM Guardium Data Protection 12.2 is vulnerable to command injection in the SNMP alert notification functionality. An authenticated attacker who can influence policy alert text can cause attacker-controlled data to be executed as operating system commands by the SNMP alerter service, which runs with root privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Validate partition index before array access
construct_region() reads cxled->part and uses it to index
cxlds->part[] without checking for a negative value. If the
partition was never resolved, part remains at its initial value
of -1, causing an out-of-bounds array access.
Add a guard to return -EBUSY when part is negative.
The check was dropped during a merge. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/ras: add ras_suspend callback and use it for cp_ecc_error_irq
cp_ecc_error_irq is acquired in amdgpu_gfx_ras_late_init() but
released in gfx_v9_0_hw_fini(), so the put site has to query
amdgpu_irq_enabled() because the get is skipped on SR-IOV VF.
ras_late_init / ras_fini have no suspend counterpart, so move the
put to amdgpu_gfx_ras_suspend() / amdgpu_gfx_ras_fini() and add a
matching ras_suspend callback that is invoked from
amdgpu_ras_suspend() before disable_all_features(). The get and
put now sit in the same place and check the same condition (not
VF, funcs registered), no refcount querying needed.
An active flag gates ras_fini so the
suspend-then-unload-without-resume path falls into
amdgpu_ras_block_late_fini_default() instead of double-releasing
what ras_suspend already cleaned up.
Drop the cp_ecc_error_irq put from gfx_v9_0_hw_fini(). gfx_v8_0
manages cp_ecc_error_irq locally and is unaffected; no other GFX
generation has this IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm: fix SmartShift bias sysfs store PM refcount on parse error
Return the parse error before acquiring PM access. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/ftrace: Fix WARNING in __unregister_ftrace_function
perf_ftrace_function_unregister() unconditionally calls
unregister_ftrace_function() without checking whether the ftrace_ops
was ever successfully registered. This triggers a WARN_ON in
__unregister_ftrace_function() when the ops doesn't have
FTRACE_OPS_FL_ENABLED set.
This can happen during perf_event_alloc() error cleanup when
perf_trace_destroy() is called via __free_event() on an event whose
ftrace_ops registration failed or was already torn down by
perf_try_init_event()'s err_destroy path.
The call path is:
perf_event_alloc() error cleanup
-> __free_event()
-> event->destroy() [tp_perf_event_destroy]
-> perf_trace_destroy()
-> perf_trace_event_close()
-> TRACE_REG_PERF_CLOSE
-> perf_ftrace_function_unregister()
-> unregister_ftrace_function()
-> __unregister_ftrace_function()
-> WARN_ON(!(ops->flags & FTRACE_OPS_FL_ENABLED))
Fix this by checking FTRACE_OPS_FL_ENABLED before attempting to
unregister. If the ops is not enabled, just free the filter and
return success. |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked()
When topology_physical_package_id()/topology_logical_die_id() returns
a negative value, rapl_add_package_cpuslocked() returns ERR_PTR(-EINVAL)
directly without freeing the rapl_package structure that was just
allocated by kzalloc_obj(), leaking memory on every failed package
addition.
Use the existing err_free_package label so that the allocation is
released on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/counter: Fix num_counters leak on bind_qp failure in alloc_and_bind()
When __rdma_counter_bind_qp() fails in alloc_and_bind(), the error path
jumps to err_mode which frees the counter without decrementing
port_counter->num_counters. The only place that decrements is
rdma_counter_free(), which is unreachable since the counter was never
successfully bound.
This leak accumulates across repeated failures, permanently preventing
the port from switching to AUTO mode (-EBUSY in __counter_set_mode())
and blocking the MANUAL→NONE auto-revert in rdma_counter_free(). When
the mode was NONE before the call, the MANUAL mode set by
__counter_set_mode() also leaks since the revert logic is never
reached.
Add an err_bind label between the num_counters increment and the
existing err_mode label. It decrements num_counters and mirrors the
MANUAL→NONE revert from rdma_counter_free(), ensuring the port state
is fully restored on bind failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Bound GPIO I2C table entry count from VBIOS
Reject undersized tables and cap the derived entry count
to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[]
or walk an absurd number of entries on corrupt size fields. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: avoid out-of-bounds access in monitor
In NAN, we don't know on what band the frame will be sent. Therefore we
set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound
access in ieee80211_add_tx_radiotap_header when we try to access the
sbands array.
Fix it by not accessing the array if the band is NUM_NL80211_BANDS.
This means that we will not report rate info for legacy rate in NAN.
But nobody really cares about it. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Acquire init_mm read lock on attribute changes to avoid UAF
A previous commit protected against races between ptdump and CPA collapse,
however one still exists between attribute changes and collapse as reported
by Denis V. Lunev (linked).
When an attribute change arises, a lockless page table walker obtains a PTE
entry, which is later written to via set_pte_atomic():
...
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> _lookup_address_cpa()
-> lookup_address_in_pgd_attr()
-> [ lockless page table walker ]
-> set_pte_atomic()
There is nothing preventing a concurrent CPA collapse which can free the
PTE that was retrieved here, resulting in a use-after-free.
With the mmap write lock taken on init_mm over CPA collapse, resolve this
race by acquiring an mmap read lock on init_mm over
__change_page_attr_set_clr().
This locks across the whole operation over which the walk and the PTE
entry write occurs, solving the race.
It is safe to do this here, as no spinlocks are held upon entry to
__change_page_attr_set_clr().
However, the lock must not be held over an allocation, as allocation can
trigger reclaim and shrinkers may call into CPA recursively, making
deadlocks possible (init_mm -> ... -> fs_reclaim -> init_mm).
A page table is allocated when a huge page needs to be split:
-> change_page_attr_set_clr()
-> __change_page_attr_set_clr()
-> __change_page_attr()
-> split_large_page()
[ pagetable_alloc() ]
-> __split_large_page()
Avoid deadlocks by dropping the mmap lock across pagetable_alloc() in
split_large_page() and track whether this is needed by adding a new
'init_mm_read_locked' flag to struct cpa_data.
This is safe as __split_large_page() (called with locks re-established)
revalidates that the page table entry is the same as it was prior to the
locks being dropped and __change_page_attr() repeats the entire page table
walk whenever a split occurs, so concurrent split and collapse are
accounted for.
Concurrent ptdump is also safe as the lock is only dropped over page table
allocation during which time the page table has not yet been modified.
The CPA_COLLAPSE flag is only set by set_memory_rox(), which exclusively
operates upon vmalloc ranges, and on x86 only within the module mapping
space.
This is important, because some callers directly invoke
__change_page_attr_set_clr(), bypassing this lock. However, none of these
operate within the module mapping space.
* cpa_process_alias() - a recursive helper called by
__change_page_attr_set_clr().
* __set_memory_enc_pgtable() - operates on the direct mapping and (via
__vmbus_establish_gpadl()) the vmalloc mapping space.
* __set_pages_[n]p() - called by set_direct_map_[invalid, default,
valid]_noflush(), __kernel_map_pages() - operates on the direct map.
* kernel_[un]map_pages_in_pgd() - operates on EFI ranges.
This work is based upon Denis V. Lunev's excellent analysis of the bug
with gratitude.
[ dhansen: move to imperative voice in changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Allocate split page tables as kernel page tables
A PTE is allocated directly without going through the standard page table
allocation routines (such as pte_alloc_one_kernel()) when the CPA code
splits a large page (__split_large_page()).
This means the page table constructor is never called nor is the page table
marked as a kernel page table.
The former results in the folio associated with the page table not being
marked as a page table (__pagetable_ctor() is never called thus neither is
__folio_set_pgtable()) nor are statistics updated to reflect
it (lruvec_stat_add_folio() is never called).
The latter issue of failing to mark the page table as a kernel page
table (ptdesc_set_kernel() is never called) is far more problematic.
Since commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
kernel page table freeing has been batched and since the
subsequent commit:
e37d5a2d60a3 ("iommu/sva: invalidate stale IOTLB entries for kernel address space")
IOTLB cache entries for kernel page tables have been invalidated upon
being freed.
Since split page tables are freed without this invalidation, the IOTLB
can contain stale entries for them.
Resolve the issue by using the ordinary PTE allocation API at split time.
This results in these kernel page tables invoking a page table constructor,
and thus requires a page table destructor.
Destructors are not always present, like for early allocated direct map
page tables). Conditionally call pagetable_dtor_free() if the PG_table
folio flag for the ptdesc is set, otherwise we free the page table via
pagetable_free().
Regardless of which path is taken page tables marked as kernel page tables,
which now includes split page tables, take the correct route through
pagetable_free_kernel().
There is a user-visible side effect in that split page tables will appear
in nr_page_table_pages in /proc/vmstat (as do other kernel page tables
allocated after early boot), however this is a positive change.
This issue started being markedly problematic after commit:
5ba2f0a15564 ("mm: introduce deferred freeing for kernel page tables")
so choose this as the Fixes target.
[ dhansen: rephrase in imperative mood ] |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: paris: bypass pinctrl GPIO layer in set GPIO direction
pinctrl_gpio_direction_input() / pinctrl_gpio_direction_output() take
the pinctrl mutex. This causes a gpiochip operations to need to sleep.
Worse yet, the .can_sleep field in the gpiochip is not set. This causes
the shared GPIO proxy to trip over, as it uses gpiod_cansleep() to check
whether it can use a spinlock or needs a mutex. In this case, it ends
up taking a spinlock, then calls pinctrl_gpio_direction_output(), which
takes a mutex. This causes a huge warning.
While this class of Mediatek hardware does not have separate clear/set
registers, the pinctrl context has a spinlock that is taken whenever
a register read-modify-write is done. Also, once the GPIO function is
selected / muxed in, further GPIO operations do not involve pinctrl
operations or state. The GPIO direction and level values do not require
toggling the pinmux or any other pin config options.
Switch to directly calling mtk_pinmux_gpio_set_direction() in the GPIO
set direction callbacks to avoid taking the pinctrl mutex. Drop the
.gpio_set_direction field in mtk_pmxops to signal we are no longer using
the pinctrl GPIO layer for setting the direction. |
| In the Linux kernel, the following vulnerability has been resolved:
genirq/proc: Size interrupt directory names for 10-digit interrupt numbers
/proc/irq/<n>/ directory names are built in `char name[10]` buffers
with `sprintf(name, "%u", irq)`.
Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and
current sparse-IRQ configurations allow interrupt numbers in that range.
Size the temporary name buffer for the current decimal form and switch
to bounded formatting when creating or removing the proc entry. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk
Review by sashiko.dev highlighted potential use after free and resource
leak instances.
Set se10_pdev to null to prevent use after free
Remove DMI call back and instead directly call
se10_create_platform_device. Handle error cases appropriately |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store()
Currently, the __resource_resize_store() allows writing to the
resourceN_resize sysfs attribute to change a BAR's size without checking
for capabilities, currently relying only on the file access check.
Resizing a BAR modifies PCI device configuration and can disrupt active
drivers. After the upcoming conversion to static attributes, it will also
trigger resource file updates via sysfs_update_groups().
Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR
resize operations. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Release m2m_ctx after Instance Removed from List
Possible use after free if IRQ thread manages to obtain spinlock between
m2m_ctx release and wave5_release function removing stream instance from
list of active instances. The IRQ thread looks for the m2m_ctx which is
freed so null pointer dereference occurs. |
