| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Ghidra versions 9.2 through 12.1.4 contain a heap out-of-bounds read vulnerability in StringManager::getCodepoint when decoding multi-byte UTF-8, UTF-16, or UTF-32 characters without validating remaining buffer length. Attackers can craft malicious binaries containing strings or constant byte stores that end in multi-byte lead units to trigger out-of-bounds reads that crash the decompiler or leak adjacent heap memory into decompiled output. |
| Integer overflow or wraparound in Remote Desktop Client allows an unauthorized attacker to deny service over a network. |
| FalkorDB (Redis module) v4.20.1 to v4.20.4 was discovered to contain a stack overflow in the _ValidateUnion_Clauses function (/ast/ast_validations.c). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| FalkorDB (Redis module) v4.20.1 to v4.20.4 was discovered to contain a buffer overflow in the _Decode_GrB_Matrix function (/v19/decode_matrix.c). This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| An integer overflow in the _BulkInsert_ReadProperty component (/bulk_insert.c) of FalkorDB (Redis module) v4.20.1 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| Dancer2 versions before 2.2.0 for Perl do not strip CR and LF from response header names in headers_to_array.
The routine removes CR and LF from each header value but not from the name. A name carrying them therefore reaches the PSGI server intact. A server that does not validate keys writes it to the wire, so the bytes after the CRLF arrive as their own header line.
The application has to derive the header name from request data, not just the value.
An attacker who controls that data adds their own headers and splits the response. |
| Catalyst::Seal versions before 0.03 for Perl allow one request to disable a path or route a later one past an authorization check via a dispatch memo keyed on the request path alone.
Catalyst::Seal replaces the dispatcher's prepare_action with a version that memoises how a path resolved: which dispatch type matched, at which level, and what was left over as arguments. The key is the request path and nothing else. Action roles that match on the method, content type, scheme or query make that resolution depend on state the key does not carry, so the memo answers for a request it was not built from.
A path that resolves to no action is memoised as well, and replaying that entry returns without consulting any dispatch type, so no action is set and the request fails. A GET of a path whose action is declared POST-only therefore disables that path for every later request, the correct POST included. An entry that did resolve replays the level the earlier descent reached. Where a POST-only action sits below a shallower action on the same path, a GET memoises the shallow route, and a later POST is dispatched there with an auto() guarding the deeper controller never running.
The memo is cleared only when an action is registered, which happens at setup, so an entry lasts for the life of the process, and its cap of 2048 entries bounds how many paths one caller can disable. In the configuration measured, the misroute lands on the less privileged action, so it is an authorization check not running rather than a privilege gain. |
| Lemonldap::NG::Portal versions from 2.20.0 before 2.21.6, from 2.22.0 before 2.23.4 for Perl allow unauthenticated OAuth2 token introspection because checkEndPointAuthenticationCredentials does not verify the client secret of a public Relying Party.
checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the authentication method deduced from the request, client_secret_basic or client_secret_post. introspection() rejects a caller only when that method is missing or none, so a request carrying a public client_id and an arbitrary or empty secret passes the endpoint's authentication check.
An attacker who holds an access token and knows the client_id of any public Relying Party can confirm the token is active and read its metadata, including scope, audience, expiry and the sub claim. The sub claim is computed with the calling Relying Party's user identifier attribute, so an attacker can translate a user identifier from one Relying Party to another, defeating per-client and pseudonymous identifiers. |
| Lemonldap::NG::Portal versions from 2.23.0 before 2.23.4 for Perl allow a PKCE bypass for public Relying Parties in "PKCE or secret" mode because checkEndPointAuthenticationCredentials does not verify the client secret.
With oidcRPMetaDataOptionsRequirePKCE set to 2, the authorization endpoint issues a code even when the request carries no code_challenge, and token() admits the exchange as long as a challenge was stored or an authentication method was returned for the caller. checkEndPointAuthenticationCredentials() skips the secret comparison for a Relying Party marked public and still returns the method deduced from the request, so any Basic or form credential satisfies the secret branch. validatePKCEChallenge() then passes, because neither a challenge nor a verifier is present.
An attacker who intercepts an authorization code issued to a public Relying Party can exchange it for the user's access, ID and refresh tokens by replaying the client_id with an arbitrary secret, which is the attack PKCE prevents. Dynamic client registration creates every Relying Party in this mode. |
| Dell Boot Optimized Server Storage (BOSS), versions prior to 2.2.13.2038, contains an On-Chip Debug and Test Interface With Improper Access Control vulnerability in the SMCU on 17G BOSS-N1 controllers. An unauthenticated attacker with physical access could potentially exploit this vulnerability, leading to Unauthorized access. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.2.0 until 10.5.1, the Address6 isPrivate classifier in src/ipv6.ts does not recognize the NAT64 local-use range 64:ff9b:1::/48. Applications that combine isPrivate, isLoopback, and isLinkLocal for a trust-boundary decision can treat an internal IPv4 destination encoded through that range as external. Exploitation depends on a server network using an operator-selected NAT64 prefix within the local-use range. A successful bypass can cross the intended network trust boundary. This issue is fixed in version 10.5.1. |
| ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.5.1, the Address6 isLinkLocal method in src/ipv6.ts recognizes only fe80::/64 instead of the complete fe80::/10 IPv6 link-local range. An attacker-controlled address elsewhere in fe80::/10 can therefore pass a trust-boundary check that relies on isLinkLocal. The same address is identified as link-local by getType and getScope, exposing the inconsistent classification. A successful bypass can reach an on-link host outside the intended trust boundary. This issue is fixed in version 10.5.1. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 1.16.1 until 1.20.0, the RFC 2397 regular expression allows slash characters on both sides of the media-type separator. An application passes an attacker-controlled malformed data URL containing many slash characters and no comma. the JavaScript regular-expression engine explores many separator placements before rejecting the URL. Synchronous excessive backtracking can block the Node.js event loop and cause denial of service. The affected identifiers are fromDataURI, DATA_URL_PATTERN, data:. This issue is fixed in version 1.20.0. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 1.7.0 until 1.20.0, the fetch adapter constructs a Request with sanitized resolvedOptions but then calls fetch with the original fetchOptions. A separate same-process prototype-pollution flaw populates Object.prototype.headers so fetchOptions.headers resolves through inheritance. The inherited fetchOptions.headers value overrides the sanitized Request headers through the second argument to fetch after Request construction. Attacker-controlled request headers can alter authorization, caching, metadata-service access, or application-specific behavior. This issue is fixed in version 1.20.0. |
| A vulnerability was determined in Barco ClickShare CX-20 Gen2 up to 02.26.00.0007. Affected by this issue is some unknown functionality of the file /wallpaper of the component Wallpaper Upload. This manipulation of the argument wallpaper causes improper validation of syntactic correctness of input. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| vLLM before 0.29.0 fails to enforce decoder prompt-length validation on the disaggregated serving endpoint /inference/v1/generate. When the request contains a 'features' (multimodal) payload, vllm/entrypoints/serve/disagg/serving.py builds a multimodal EngineInput directly from the caller-supplied token_ids, and GenerateRequest.token_ids (vllm/entrypoints/serve/disagg/protocol.py) is not checked against model_config.max_model_len. For multimodal processors that report skip_prompt_length_check=True (for example Nemotron Parse, Whisper, and FireRedLID), InputProcessor._validate_prompt_len() returns immediately for both encoder and decoder prompts, so an overlong prompt becomes an EngineCoreRequest and reaches the worker input-batch copy into a fixed max_model_len-wide NumPy row. A client able to reach the endpoint on an affected model configuration can therefore submit an overlong token_ids list to trigger a worker failure and denial of service. Fixed in 0.29.0. |
| vLLM versions before 0.29.0 contain a denial-of-service vulnerability in the cache_salt parameter accepted on OpenAI-compatible and Anthropic API endpoints, which lacks maximum length validation and is processed on the single EngineCore scheduler thread. Unauthenticated attackers can send HTTP requests with multi-hundred-megabyte salt values that trigger expensive pickle serialization and SHA-256 hashing, stalling the scheduler thread and denying service to all concurrent requests. |
| Axios is a promise-based HTTP client for the browser and Node.js. From 1.12.0 until 1.20.0, ResolveConfig reads inherited Symbol.toStringTag, append, and getHeaders properties while resolving FormData headers. A separate same-process prototype-pollution flaw supplies an array or non-plain class instance whose inherited properties make it appear FormData-like; plain objects are blocked. The inherited getHeaders function can return attacker-controlled headers that resolveConfig merges into a fetch adapter request. Attacker-controlled headers can alter authorization, cache, metadata-service, or application-specific request behavior. This issue is fixed in version 1.20.0. |
| Integer overflow or wraparound in Windows Imaging Component allows an unauthorized attacker to execute code over a network. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 17.1 before 19.1.8, 19.2 before 19.2.6, and 19.3 before 19.3.2 that, under certain conditions, an authenticated user with Owner or Maintainer permissions could have silently disabled protected environment deployment approval requirements, allowing unapproved deployments to reach production, due to improper access control checks performed after the protected resource was modified. |
