Export limit exceeded: 401149 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23220 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93894 | 2 Varnish-software, Vinyl-cache | 2 Varnish Cache, Vinyl Cache | 2026-09-19 | N/A |
| In Vinyl Cache before 9.0,2, workspace buffer overflow vulnerability was found in the .upper() and .lower() string type methods of VCL. This can be used as a remote denial of service (DoS) vector to make the child process segfault or assert, and then restart. Effectively exploiting this vulnerability requires prior knowledge about the VCL in use and the ability to craft a request that contains a string that is long enough to fill the remaining workspace at the call site while staying under the different request size limits (http_req_size, http_req_hdr_len, etc.). | ||||
| CVE-2026-15579 | 1 Moxa | 1 Tn-4500b Series | 2026-09-19 | N/A |
| An out-of-bounds write vulnerability exists in some of the Ethernet switches because of improper validation of the username field length during Web login processing. This may allow a remote attacker to submit a specially crafted overly long input, triggering a buffer overflow that can cause the authentication process to crash and result in a Denial of Service (DoS) attack. | ||||
| CVE-2026-90295 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: imx6q: fix out-of-bounds write when probed more than once imx6_soc_volt is allocated fresh on every probe, sized to the number of ARM OPPs: imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt), GFP_KERNEL); but it is filled through soc_opp_count, which has static storage and is never reset. A second bind after an unbind keeps indexing from where the first one stopped, and writes past the end of the new array. Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN: BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34 Write of size 4 at addr c5e90480 by task binder/73 imx6q_cpufreq_probe from platform_probe+0x88/0xe4 platform_probe from really_probe+0x108/0x384 bind_store from kernfs_fop_write_iter+0x1b4/0x28c The write lands one u32 past the end of the allocation. soc_opp_count is only read a few lines below the loop that fills it, so it never needed static storage. Make it a local. | ||||
| CVE-2026-90226 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: avoid userspace overflow on invalid optlen nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so the kernel always stores 4 bytes regardless of the caller-supplied optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length reported back to userspace; it does not constrain the store. A call with optlen < 4 therefore writes past the user buffer, violating the getsockopt(2) contract for all five supported optnames. Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a plain size comparison would promote a negative optlen to size_t and slip past the check; an explicit 'len < 0' test is added first to catch negative values before the size compare. | ||||
| CVE-2026-82892 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 8.1 High |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-82887 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 8.8 High |
| IBM Guardium Data Protection 12.2 could allow a remote authenticated attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-81623 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 6.3 Medium |
| IBM Guardium Data Protection 12.2 could allow an authenticated user to execute arbitrary commands with low user privileges on the system due to improper validation of user supplied input. | ||||
| CVE-2026-80442 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 9.9 Critical |
| IBM Guardium Data Protection 12.2 is vulnerable to an authenticated OS command injection vulnerability in the exportCertificate functionality. Successful exploitation could allow an attacker to execute unauthorized commands and impact the confidentiality, integrity, and availability of the affected system. | ||||
| CVE-2026-17262 | 1 Ibm | 1 I | 2026-09-19 | 5.4 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local attacker to cause a denial of service due to improper validation of FTP authentication commands. | ||||
| CVE-2026-90349 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx() When mac80211 leaves the link unspecified, mt7996_tx() substitutes the primary link id of the station or vif. That value is IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added, and it is then used unchecked to index vif->link_conf[], mvif->mt76.link[] and sta->link[], all of which hold IEEE80211_MLD_MAX_NUM_LINKS (15) entries. Clamp the primary link id to the default link before using it, and use the clamped value for the link_sta fallback as well. | ||||
| CVE-2026-84085 | 1 Ibm | 1 Guardium Data Protection | 2026-09-19 | 8.1 High |
| IBM Guardium Data Protection 12.2 could allow a remote attacker to execute arbitrary OS commands due to improper neutralization of special elements used in an OS command. | ||||
| CVE-2026-90369 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix out-of-bounds access in mmio copy helpers mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to ALIGN(len, 4), so a length that is not a multiple of four reads past the source buffer (write_copy) or writes past the destination (read_copy). Copy the aligned body in the loop and handle the remaining tail through a 4-byte bounce buffer, keeping the register access width unchanged. | ||||
| CVE-2026-90374 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: validate RX band_idx before dereferencing phys[] band_idx comes from a 2-bit descriptor field (0-3) and was used directly to index dev->mt76.phys[] (size __MT_MAX_BAND == 3) and dereference the result. A corrupt or reserved descriptor value could index out of bounds or hit a NULL phy on parts with fewer bands. Reject invalid band indices, mirroring mt7996_rx_get_wcid(). | ||||
| CVE-2026-90411 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvme-fc: unmap cmd_iu DMA on rsp_iu mapping failure in init_request __nvme_fc_init_request() maps cmd_iu and then rsp_iu for DMA. If the rsp_iu mapping fails, the original code only recorded the error and fell through: it left the already-mapped cmd_iu unmapped and still marked the op as FCPOP_STATE_IDLE before returning. Since blk-mq does not call .exit_request() when .init_request() fails, the cmd_iu mapping is leaked for every op whose rsp_iu mapping fails. Jump to an error path on rsp_iu mapping failure that unmaps cmd_iu and returns the error without marking the op idle, so it stays in the FCPOP_STATE_UNINIT state set by the initial memset(). | ||||
| CVE-2026-92516 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix offset warn check for bpf_res_spin_lock Sashiko pointed out correctly that the case statement for BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK. Fix it by checking res_spin_lock_off instead. | ||||
| CVE-2026-92520 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Zero queue and stack outputs on lock failure Queue and stack pop/peek helpers accept an uninitialized output buffer because the verifier expects the helper to initialize it. The empty-map error path clears the buffer, but a failed lock acquisition returns -EBUSY without writing it. Clear the output before returning -EBUSY so BPF programs cannot observe uninitialized stack contents after a failed helper call. | ||||
| CVE-2026-93065 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs The loop counter 'count' was declared as u8 while num_pc is u32. If firmware advertises more than 255 PC entries the counter wraps back to zero and the loop never terminates potentially causing an infinite loop or reading past the allocated pc_data array. Change the declaration to u32 to match num_pc. | ||||
| CVE-2026-89881 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent DMA stream buffers are freed while dev->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming() locks v4l2_lock, so the previous outer mutex_lock(&dev->vb_queue_lock) / mutex_lock(&dev->v4l2_lock) pair around the unregister sequence would self-deadlock and has been removed. A short v4l2_lock critical section around dev->udev = NULL remains so any ioctl path that still holds the file descriptor sees coherent state. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-93164 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Move optimized uprobe from nop5 to nop10 Andrii reported an issue with optimized uprobes [1] that can clobber redzone area with call instruction storing return address on stack where user code may keep temporary data without adjusting rsp. Fixing this by moving the optimized uprobes on top of 10-bytes nop instruction, so we can squeeze another instruction to escape the redzone area before doing the call, like: lea -0x80(%rsp), %rsp call tramp Note the lea instruction is used to adjust the rsp register without changing the flags. We use nop10 and following transformation to optimized instructions above and back as suggested by Peterz [2]. Optimize path (int3_update_optimize): 1) Initial state after set_swbp() installed the uprobe: cc 2e 0f 1f 84 00 00 00 00 00 From offset 0 this is INT3 followed by the tail of the original 10-byte NOP. After a previous unoptimization bytes 5..9 may still contain the old call instruction, which remains valid for threads already there. 2) Rewrite the LEA tail and call displacement: cc [8d 64 24 80 e8 d0 d1 d2 d3] From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not executable entry points while byte 0 is trapped. 3) Publish the first LEA byte: [48] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this is: lea -0x80(%rsp), %rsp call <uprobe-trampoline> Unoptimize path (int3_update_unoptimize): 1) Initial optimized state: 48 8d 64 24 80 e8 d0 d1 d2 d3 Same as 3) above. 2) Trap new entries before restoring the NOP bytes: [cc] 8d 64 24 80 e8 d0 d1 d2 d3 From offset 0 this traps. A thread that had already executed the LEA can still reach the intact CALL at offset 5. 3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped and byte 5 as CALL. cc [2e 0f 1f 84] e8 d0 d1 d2 d3 From offset 0 this still traps. Offset 5 is still the CALL for any thread that was already past the first LEA byte. 4) Publish the first byte of the original NOP: [66] 2e 0f 1f 84 e8 d0 d1 d2 d3 From offset 0 this is the restored 10-byte NOP; the CALL opcode and displacement are now only NOP operands. Offset 5 still decodes as CALL for a thread that was already there. Tthere is only a single target uprobe-trampoline for the given nop10 instruction address, so the CALL instruction will not be changed across unoptimization/optimization cycles. Therefore, any task that is preempted at the CALL instruction is guaranteed to observe that CALL and not anything else. Note as explained in [2] we need to use following nop10: PF1 PF2 ESC NOPL MOD SIB DISP32 NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1) which means we need to allow 0x2e prefix which maps to INAT_PFX_CS attribute in is_prefix_bad function. Also changing the uprobe syscall error when called out of uprobe trampoline to -EPROTO, so we are able to detect the fixed kernel. The optimized uprobe performance stays the same: uprobe-nop : 3.129 ± 0.013M/s uprobe-push : 3.045 ± 0.006M/s uprobe-ret : 1.095 ± 0.004M/s --> uprobe-nop10 : 7.170 ± 0.020M/s uretprobe-nop : 2.143 ± 0.021M/s uretprobe-push : 2.090 ± 0.000M/s uretprobe-ret : 0.942 ± 0.000M/s --> uretprobe-nop10: 3.381 ± 0.003M/s usdt-nop : 3.245 ± 0.004M/s --> usdt-nop10 : 7.256 ± 0.023M/s [1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/ [2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t | ||||
| CVE-2026-93166 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: debug: fix off by on in rtw89_ppdu_str() This > comparison should be >= to avoid an out of bounds access. | ||||