| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a stack-based out-of-bounds write / stack-buffer-overflow in bacnet-stack when the server processes a malicious Atomic-Read-File request in record access mode. The bug is triggered on the real server side. A crafted request can set an excessively large RecordCount, which is later used as the loop bound for writing record data into a stack-allocated BACNET_ATOMIC_READ_FILE_DATA data structure. However, the stack object only has space for one fileData element. When the loop reaches i = 1, the code computes &data->fileData[1], which is already out of bounds, and the resulting invalid pointer is passed down to memmove(), causing a stack-buffer-overflow. This issue has been patched in versions 1.4.4 and 1.5.1. |
| Improper validation of consistency within input in AMD SEV (Secure Encrypted Virtualization) firmware could allow an attacker with administrative privileges to create multiple RMP entries for the same guest physical address, potentially resulting in loss of guest integrity. |
| Improper validation of unsafe equivalence in input could allow an attacker with high privileges to reclaim the ring buffer queue status page, potentially resulting in loss of guest memory integrity. |
| Insufficient Granularity of Access Control in AMD Secure Encrypted Virtualization (SEV) firmware could allow an attacker with administrative privileges attacker to write to a trusted region used by AMD Secure Encrypted Virtualization-Encrypted State (SEV-ES), potentially resulting in loss of integrity. |
| Improper handling of overlap between protected memory ranges in the Secure Encrypted Virtualization (SEV) firmware could allow a privileged attacker to cause misconfigurations in the RMP potentially resulting in loss of integrity. |
| Improper access control in AMD Secure Encrypted Virtualization (SEV) firmware could allow a malicious hypervisor to bypass Reverse Map Table (RMP) protections, potentially impacting the integrity of Secure Encrypted Virtualization-Secure Nested Paging (SEV-SNP) guest memory. |
| pam_usb provides hardware authentication for Linux using removable media. Prior to version 0.9.3, src/local.c (pusb_get_tty_from_display_server) allocates a 4096-byte cmdline buffer, reads up to 4096 bytes from /proc//cmdline, then replaces every NUL separator with a space. When read(2) returns exactly 4096 bytes for any process the function inspects, the buffer ends without a terminator and the subsequent strstr() calls scan past the allocation boundary. The function is invoked during normal PAM authentication when DISPLAY is set, so the read fires for every process at auth time. Consequences are bounded: strstr output is a Boolean substring match (limited info-disclosure surface) but a hostile heap layout can produce a SIGSEGV that terminates the host PAM process. This issue has been patched in version 0.9.3. |
| In tile_info of av1_decoder, there is a possible Heap Buffer Overflow due to a heap buffer overflow. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation. |
| In spm_alloc of encoder, there is a possible Heap Buffer Overflow due to a heap buffer overflow. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation. |
| In s_copy_host_apb_param of multiple files, there is a possible way to trigger an out of bounds read in the video decoder command queue due to a logic error. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| A flaw was found in Red Hat Quay. An unauthenticated client can obtain an anonymous registry token with an audience it controls, present that token to the service key rotation endpoint, and install its own approved signing key with no expiry. Registry tokens signed with that key are accepted for any repository, allowing read and write access to private images and replacement of repository tags. |
| Buffer overflow in Media in Google Chrome prior to 157.0.8103.38 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, a stack-buffer-overflow can be triggered in the current master branch when a Loop object reads a referenced property through its default timer path and the referenced property is OBJECT_STRUCTURED_VIEW / PROP_DESCRIPTION containing a long attacker-controlled string. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4, 1.5.1, and 1.6.0, the current master demo server can be crashed remotely over BACnet/IP by sending a valid Confirmed WriteProperty request that updates loop-1's controlled-variable-reference to point to life-safety-zone-1 / accepted-modes. This issue has been patched in versions 1.4.4, 1.5.1, and 1.6.0. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, an out-of-bounds read vulnerability exists in bacnet-stack's AtomicWriteFile record-access path. The bug is caused by a mismatch between an externally controlled returnedRecordCount field and the fixed-size internal fileData[] array used by BACNET_ATOMIC_WRITE_FILE_DATA. This issue has been patched in versions 1.4.4 and 1.5.1. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to versions 1.4.4 and 1.5.1, there is a client-side out-of-bounds read in the AtomicReadFile-ACK record-access handling path. The issue is caused by a mismatch between a remote returnedRecordCount value and the fixed local fileData[] array capacity in BACNET_ATOMIC_READ_FILE_DATA. The ACK decode path preserves the remote RecordCount, discards storage for excess records without truncating that count, and a downstream sink later iterates over the original RecordCount and indexes fileData[i] out of bounds. This issue has been patched in versions 1.4.4 and 1.5.1. |
| A stack-based buffer overflow vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer Cloud 8.0.0 through 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager Cloud 8.0.0 through 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11 may allow an authenticated administrator to execute unauthorized code or commands or cause a denial of service via specially crafted JSON-RPC requests. |
| A flaw was found in SSSD's conversion of X.509 certificate RSA public keys to SSH keys. Missing size checks before copying RSA components into fixed-size stack buffers can cause a stack buffer overflow. An attacker able to supply a certificate with oversized RSA components that passes the configured certificate checks can cause denial of service and corrupt SSH responder memory. |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()
genelink_rx_fixup() splits an aggregated RX frame into its individual
packets, using a per-packet length taken from device-supplied data. That
length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared
against how many bytes were actually received.
A malicious GeneLink (GL620A) device can therefore send a short URB whose
header claims packet_count > 1 and a first packet of up to 1514 bytes.
skb_put_data(gl_skb, packet->packet_data, size);
then copies past the end of the receive buffer and hands the adjacent slab
contents up the network stack, an out-of-bounds read that leaks kernel heap.
No privilege is required: the path runs in the usbnet RX softirq as soon as
the interface is up.
BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112)
Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14
Call Trace:
...
__asan_memcpy (mm/kasan/shadow.c:105)
genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112)
usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3405)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
...
skb_pull() already verifies that the requested length fits the buffer and
returns NULL otherwise. Move it ahead of the copy and check its result, so
a packet that overruns the received data is rejected before it is read.
Well-formed frames, whose packets are fully present, are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: net1080: validate packet_len before pad-byte access in rx_fixup
For an even packet_len, net1080_rx_fixup() reads the pad byte at
skb->data[packet_len] before the skb->len != packet_len check further
down, and packet_len is only bounded against NC_MAX_PACKET. A malicious
NetChip 1080 device can send a short frame advertising a large even
packet_len (e.g. 0x4000), so the pad-byte read lands past the end of the
skb:
BUG: KASAN: slab-out-of-bounds in net1080_rx_fixup
Read of size 1 at addr ffff8880106c83c6 by task ksoftirqd/0/14
...
net1080_rx_fixup (drivers/net/usb/net1080.c:384)
usbnet_bh (drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3708)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
...
Reject the frame when packet_len >= skb->len before reading. |