| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - zero absinfo before partial copy in EVIOCSABS
The EVIOCSABS handler copies at most the user supplied ioctl size into
an uninitialized on-stack struct input_absinfo:
if (copy_from_user(&abs, p, min_t(size_t,
size, sizeof(struct input_absinfo))))
The size comes from _IOC_SIZE() of the ioctl command and is therefore
fully controlled by userspace. A short size leaves the trailing part of
the structure holding whatever was on the kernel stack, and the whole
structure is then stored into the device:
dev->absinfo[t] = abs;
EVIOCGABS hands that back to userspace, disclosing the stale stack
bytes. Only the resolution field is currently cleared, which covers the
legacy struct layout but not an arbitrarily short size.
Zero the structure before the copy so any part not supplied by the
caller reads back as zero. The existing resolution fixup is kept, since
it also handles a size that partially overlaps that field. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: soc_button_array - check btns_desc->package.count
Check that btns_desc->package.count is not 0 before accessing
btns_desc->package.elements[0]. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
Transport drivers (such as rmi_i2c and rmi_spi) invoke
rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev
device during system power management events. However, transport drivers
are fully registered and operational even if the physical RMI driver
failed to bind or probe the rmi_dev device.
When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound
rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or
rmi_enable_irq() without driver data attached causes a NULL pointer
dereference and General Protection Fault when attempting to lock
data->enabled_mutex.
Fix this by checking if driver data is attached to rmi_dev in
rmi_driver_suspend() and rmi_driver_resume(), exiting early if
no driver data is present. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) increase number of phases and add new mask
Increase the number of phases to 16 as a new upcoming device supports
such a number.
While at it, add a new mask for controlling the source of the output
voltage.
Note (groeck):
This patch was meant to prepare for support of MAX20826 and compatible
devices, which support more than 10 phases per page. However, Sashiko
reports that the mp2975 driver already supports up to 14 phases, and the
mp2856 driver supports up to 12 phases. This already has the potential for
out-of-bounds writes when probing the affected chips, making this patch a
bug fix. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove
When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe()
creates the w83791d_group_fanpwm45 sysfs group on the I2C client
device.
The probe error path removes this group when a later initialization
step fails, but the normal remove path only removes w83791d_group.
As a result, the optional fan/pwm 4-5 sysfs files can remain after the
driver is unbound.
The callbacks associated with these files access the driver data,
which is devm allocated and released after driver unbind. Leaving the
sysfs files behind can therefore result in accesses to stale driver
data.
Remove w83791d_group_fanpwm45 during normal teardown as well.
This issue was found by manual code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject TKIP frames without a full MIC
libipw_michael_mic_verify() assumes that an skb contains an eight-byte
Michael MIC. A short TKIP frame makes the unsigned payload length wrap,
causing michael_mic() to read past the skb.
Check that the MIC is present before verifying it, and use the existing
MICHAEL_MIC_LEN constant for all MIC lengths in the verifier. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: validate curve data length in the calibration curve converters
p54_convert_rev0() and p54_convert_rev1() read calibration curve
data from the device-supplied EEPROM entry using channel and
points-per-channel counts taken verbatim from that same entry, so
an entry that declares more data than it carries drives an
out-of-bounds read past the EEPROM buffer (verified with a KASAN
reproducer of the conversion loop). The sibling converters
p54_convert_output_limits() and p54_convert_db() already validate
their counts against the entry length; this path was missed.
Reject the entry when the counts do not fit in the entry data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: require a full exp_if record in PDR_INTERFACE_LIST
The PDR_INTERFACE_LIST loop only checks that the record start is within
the entry before reading an entire struct exp_if from it. A truncated
trailing record makes the if_id/variant reads cross the entry boundary
into the heap beyond the EEPROM buffer (verified with a KASAN
reproducer of the loop). The variant also feeds the synth front-end
selection, so this is not only a leak.
Advance only while a full record still fits in the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mwifiex: bound the pairwise-cipher OUI walk to the IE length
mwifiex_search_oui_in_ie() reads a pairwise-cipher (PTK) count from a
beacon/probe-response RSN or WPA information element and then walks that
many 4-byte OUIs, comparing each with memcmp(). The count comes straight
from the (attacker-supplied) IE and is never checked against the
element's own length, and the callers admit the element on element_id
alone (has_ieee_hdr() / has_vendor_hdr(), no length check). A crafted
RSN/WPA IE with a large pairwise count therefore makes the walk read up
to 255 * 4 bytes past the element -- an out-of-bounds read of the
kmemdup()'d beacon buffer, reachable from any AP whose beacon/probe
response is processed during scan-result parsing.
Pass the number of IE bytes available at the OUI list and bound the walk
to the element. Keep the length signed and reject a negative value
before any unsigned arithmetic, so a small or zero IE length cannot
underflow to a large size_t and defeat the bound.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: RCU-free the scheduler-containing ring and VM objects
Both struct msm_ringbuffer and struct msm_gem_vm embed a struct
drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback
msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then
free the containing object with plain kfree().
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace (the submit out-fence, or
a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded
scheduler after the ring/VM is freed, so a later get_timeline_name() --
reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab
memory (KASAN slab-use-after-free read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
objects with kfree_rcu() instead of kfree().
Patchwork: https://patchwork.freedesktop.org/patch/750234/ |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: cancel reconnect work in clean_demultiplex_info()
clean_demultiplex_info() cancels server->echo delayed work but not
server->reconnect, which can cause a use-after-free when the
demultiplex thread exits while a reconnect work is still queued:
cifs_demultiplex_thread()
cifs_readv_from_socket()
cifs_reconnect()
__cifs_reconnect()
cifs_queue_server_reconn()
mod_delayed_work(cifsiod_wq, &server->reconnect, 0)
clean_demultiplex_info()
cancel_delayed_work_sync(&server->echo) // echo canceled
// reconnect NOT canceled
kfree_sensitive(server) // server freed
...later, on cifsiod_wq:
smb2_reconnect_server()
server->srv_count // UAF read of freed server
Fix this by canceling server->reconnect delayed work in
clean_demultiplex_info() before the server is freed, the same way
cifs_put_tcp_session() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix rlist race and missing initialization
TCP_Server_Info.rlist is allocated via kzalloc which zeros both ->next
and ->prev to NULL instead of pointing to itself, making list_empty()
always return false and list_add() dereference a NULL ->prev pointer.
Also, cifs_signal_cifsd_for_reconnect() can be called concurrently
from multiple cifsd threads, allowing the same server's rlist node to
be added twice into the local list, corrupting it. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix smbd_connection leak on cifs_get_tcp_session() error
When an RDMA connection is successfully established via
smbd_get_connection() but cifs_get_tcp_session() later fails (e.g.
kthread_create() returns an error), the error path frees tcp_ses
without first destroying the smbd_connection.
Fix this by calling smbd_destroy() in the out_err cleanup path before
kfree(tcp_ses). smbd_destroy() safely handles the case where
smbd_conn is NULL, so it can be called unconditionally. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix OOB struct field reads in move_smb2_ea_to_cifs()
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small". |
| Uncontrolled Resource Consumption vulnerability in the Elixir standard library's Version module allows an attacker who controls a version string to cause a denial of service through CPU and memory exhaustion.
The version parser converts numeric version components (major, minor, patch and numeric pre-release/build identifiers) to integers without bounding their length. A single large all-digit component therefore forces a super-linear, non-yielding base-10 to arbitrary-precision integer conversion (String.to_integer/1, i.e. :erlang.binary_to_integer/1) that pins a BEAM scheduler, and a larger component raises an uncaught SystemLimitError that crashes the calling process. A single moderately sized string (around one megabyte) is enough; no authentication is required.
This is reachable from the public entry points Version.parse/1, Version.parse!/1, Version.match?/3, Version.compare/2, and Version.parse_requirement/1, which applications routinely call on untrusted input such as HTTP parameters, dependency-manifest fields, and package metadata.
This vulnerability is associated with program files lib/version.ex and program routines 'Elixir.Version.Parser':parse_digits/2.
This issue affects elixir: from 0.9.3 before 1.20.1. |
| A vulnerability has been found in Tenda AC5 02.03.01.111_multi. Affected by this issue is some unknown functionality of the file /goform/setWifi of the component Wifi Handler. Such manipulation of the argument wifiPwd leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. |
| A security vulnerability has been detected in vllm-project vLLM up to 0.31.0. This impacts the function conv_ssm_forward of the file vllm/model_executor/layers/mamba/mamba_mixer2.py of the component Completions Request Handler. The manipulation leads to out-of-bounds read. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was determined in SourceCodester Simple Student Information System 1.0. This vulnerability affects the function clean of the file searchresults.php. Executing a manipulation of the argument searchbox can lead to cross site scripting. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
