| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix use-after-free in rawdata dedup loop
aa_replace_profiles() walks ns->rawdata_list to dedup the incoming
policy blob against entries already attached to existing profiles.
Per the kernel-doc on struct aa_loaddata, list membership does not
hold a reference: profiles hold pcount, and when the last pcount
drops, do_ploaddata_rmfs() is queued on a workqueue that takes
ns->lock and removes the entry. Between dropping the last pcount
and the workqueue running, an entry remains on the list with
pcount == 0.
aa_get_profile_loaddata() is an unconditional kref_get() on
pcount, so when the dedup loop hits such an entry, refcount
hardening reports
refcount_t: addition on 0; use-after-free.
inside aa_replace_profiles(), and the poisoned counter then
trips "saturated" and "underflow" warnings on the subsequent
uses of the same loaddata.
Before commit a0b7091c4de4 ("apparmor: fix race on rawdata
dereference") the dedup path used a get_unless_zero-style helper
on a single counter, so the existing "if (tmp)" guard was
meaningful. The split-refcount refactor introduced
aa_get_profile_loaddata(), which has plain kref_get() semantics,
and the guard quietly became a no-op.
Introduce aa_get_profile_loaddata_not0(), matching the existing
_not0 convention used by aa_get_profile_not0(), and use it for
the rawdata_list dedup lookup so dying entries are skipped.
Reproduced on x86_64 with v7.1-rc5 in QEMU+KVM running Ubuntu
24.04 + stress-ng 0.17.06:
stress-ng --apparmor 1 --klog-check --timeout 60s
Without this patch the three refcount_t warnings fire within a
few seconds. With it the same 60 s run is clean. Coverage is a
smoke-test only; a longer soak with CONFIG_KASAN, CONFIG_KCSAN
and CONFIG_PROVE_LOCKING would be welcome from anyone with the
cycles. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- ioctl(F2FS_IOC_GARBAGE_COLLECT_RANGE) - shrink
- f2fs_gc
- gc_data_segment
- ra_data_block(cow_inode)
- mapping = F2FS_I(inode)->atomic_inode->i_mapping
: f2fs_is_cow_file(cow_inode) is true
- f2fs_evict_inode(atomic_inode)
- clear_inode_flag(fi->cow_inode, FI_COW_FILE)
- F2FS_I(fi->cow_inode)->atomic_inode = NULL
...
- truncate_inode_pages_final(atomic_inode)
- f2fs_grab_cache_folio(mapping)
: create folio in atomic_inode->mapping
- clear_inode(atomic_inode)
- BUG_ON(atomic_inode->i_data.nrpages)
We need to add a reference on fi->atomic_inode before using its mapping
field during garbage collection, otherwise, it will cause UAF issue. |
| In the Linux kernel, the following vulnerability has been resolved:
hdlc_ppp: sync per-proto timers before freeing hdlc state
Each PPP control protocol (LCP/IPCP/IPV6CP) embedded in struct ppp
registers a timer via timer_setup(). That struct ppp is the
hdlc->state allocation, which detach_hdlc_protocol() frees with kfree()
in both teardown paths: unregister_hdlc_device() and the re-attach inside
attach_hdlc_protocol().
The ppp proto never registered a .detach callback, so
detach_hdlc_protocol() performs no timer synchronization before the
kfree(). The only cancel, timer_delete(&proto->timer) in ppp_cp_event(),
is partial (it does not wait for a running callback) and only runs on the
->CLOSED transition; ppp_stop()/ppp_close() do not sync either. A
ppp_timer callback already executing (blocked on ppp->lock) survives the
kfree and then dereferences proto->state / ppp->lock in freed memory,
leading to a use-after-free.
Fix this by adding a .detach helper that calls timer_shutdown_sync() on
every per-proto timer. detach_hdlc_protocol() invokes proto->detach(dev)
before kfree(hdlc->state), so timer_shutdown_sync()
now runs on both free paths.
timer_shutdown_sync() is used instead of timer_delete_sync() because the
keepalive path re-arms the timer through add_timer()/mod_timer() and
shutdown blocks any re-activation during teardown.
Initialize the per-protocol timers in ppp_ioctl() when the protocol is
attached, and remove the now-redundant timer_setup() from ppp_start(), so
that the timers are initialized exactly once at attach time and
ppp_timer_release() never operates on uninitialized timer_list
structures. attach_hdlc_protocol() uses kmalloc() (not kzalloc), so
struct ppp's protos[i].timer is uninitialized garbage until the first
timer_setup(); without this init-at-attach, attaching the PPP protocol
without ever bringing the device up would leave timer_shutdown_sync()
operating on uninitialized memory in .detach. Moving the init out of
ppp_start() (which only runs on NETDEV_UP) into the attach path makes the
initialization unconditional and avoids initializing the same timer_list
twice.
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: char: Fix use-after-free on probe error path
rpmsg_chrdev_probe() stores the newly allocated eptdev in the default
endpoint's priv pointer before calling rpmsg_chrdev_eptdev_add(). If
rpmsg_chrdev_eptdev_add() then fails, its error path frees eptdev while
the default endpoint may still dispatch callbacks with the stale priv
pointer.
Avoid publishing eptdev through the default endpoint until
rpmsg_chrdev_eptdev_add() succeeds. Messages received before the priv
pointer is published should be ignored by rpmsg_ept_cb(). Flow-control
updates can hit rpmsg_ept_flow_cb() in the same window, so make both
callbacks return success when priv is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slot under cl_lock, dispatches sc_free
(nfsd4_free_layout_stateid) to release ls->ls_file via
nfsd4_close_layout(), and drops the nfs4_file reference in its
tail.
A second issue blocks that switch: nfsd4_free_layout_stateid()
unconditionally inspects ls->ls_fence_work via
delayed_work_pending() under ls_lock, but
INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only
after the setlease call. On the setlease-failure path the
destructor would touch an uninitialized delayed_work.
nfsd4_alloc_layout_stateid()
nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */
nfsd4_layout_setlease() /* fails */
nfs4_put_stid()
nfsd4_free_layout_stateid()
delayed_work_pending(&ls->ls_fence_work) /* needs INIT */
nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */
put_nfs4_file()
Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK
initialization above the nfsd4_layout_setlease() call, and replace
the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup
with a single nfs4_put_stid(stp). |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: Fix use after free in inode_switch_wbs_work_fn()
inode_switch_wbs_work_fn() has a loop like:
wb_get(new_wb);
while (1) {
list = llist_del_all(&new_wb->switch_wbs_ctxs);
/* Nothing to do? */
if (!list)
break;
... process the items ...
}
Now adding of items to the list looks like:
wb_queue_isw()
if (llist_add(&isw->list, &wb->switch_wbs_ctxs))
queue_work(isw_wq, &wb->switch_work);
Because inode_switch_wbs_work_fn() loops when processing isw items, it
can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is
empty. This is a problem because in that case wb can get freed (no isw
items -> no wb reference) while the work is still pending causing
use-after-free issues.
We cannot just fix this by cancelling work when freeing wb because that
could still trigger problematic 0 -> 1 transitions on wb refcount due to
wb_get() in inode_switch_wbs_work_fn(). It could be all handled with
more careful code but that seems unnecessarily complex so let's avoid
that until it is proven that the looping actually brings practical
benefit. Just remove the loop from inode_switch_wbs_work_fn() instead.
That way when wb_queue_isw() queues work, we are guaranteed we have
added the first item to wb->switch_wbs_ctxs and nobody is going to
remove it (and drop the wb reference it holds) until the queued work
runs. |
| Sandbox escape due to use-after-free in the DOM: Navigation component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| Use-after-free in the WebRTC: Audio/Video component. This vulnerability was fixed in Firefox 153, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
ipv6_hop_jumbo() calls pskb_trim_rcsum(), which can change skb pointers.
Let's recompute nh pointer to make sure any change won't mess things up. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix potential UAF in TTM object purge
TLDR: The bo->ttm object might be changed by calling ttm_bo_validate(),
move casting it to an i915_tt object later to actually get the right
pointer.
A user reported hitting the following bug under heavy use on DG2:
[26620.095550] Oops: general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 1 SMP NOPTI
[26620.095556] CPU: 2 UID: 0 PID: 631 Comm: Xorg Not tainted 6.18.8 #1 PREEMPT(lazy)
[26620.095558] Hardware name: ASRock B850M Steel Legend WiFi/B850M Steel Legend WiFi, BIOS 3.50 09/18/2025
[26620.095559] RIP: 0010:i915_ttm_purge+0x84/0x100 [i915]
[26620.095604] Code: 00 00 00 48 8d 54 24 10 48 89 e6 48 89 fb e8 83 aa ae ff 85 c0 75 6f 48 83 bb a8 01 00 00 00 74 2c 48 8b 45 78 48 85 c0 74 23 <48> 8b 78 20 48 c7 c2 ff ff ff ff 31 f6 e8 7a 73 e3 e0 48 8b 7d 78
[26620.095605] RSP: 0018:ffffc90005fd7430 EFLAGS: 00010282
[26620.095607] RAX: a56b6b6b6b6b6b6b RBX: ffff8881f46c3dc0 RCX: 0000000000000000
[26620.095608] RDX: 0000000000000000 RSI: 0000000000000246 RDI: 00000000ffffffff
[26620.095609] RBP: ffff888289610f00 R08: 0000000000000001 R09: ffff88823b022000
[26620.095609] R10: ffff888103029b28 R11: ffff8881fc7f3800 R12: ffff88810b6150d0
[26620.095609] R13: ffff888289610f00 R14: 0000000000000000 R15: ffff8881f46c3dc0
[26620.095610] FS: 00007f1004d86900(0000) GS:ffff88901c858000(0000) knlGS:0000000000000000
[26620.095611] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[26620.095611] CR2: 00007f0fdf489000 CR3: 000000035b0c1000 CR4: 0000000000750ef0
[26620.095612] PKRU: 55555554
[26620.095612] Call Trace:
[26620.095615] <TASK>
[26620.095615] i915_ttm_move+0x2b9/0x420 [i915]
[26620.095642] ? ttm_tt_init+0x65/0x80 [ttm]
[26620.095644] ? i915_ttm_tt_create+0xc6/0x150 [i915]
[26620.095667] ttm_bo_handle_move_mem+0xb6/0x160 [ttm]
[26620.095669] ttm_bo_evict+0x100/0x150 [ttm]
[26620.095671] ? preempt_count_add+0x64/0xa0
[26620.095673] ? _raw_spin_lock+0xe/0x30
[26620.095675] ? _raw_spin_unlock+0xd/0x30
[26620.095675] ? i915_gem_object_evictable+0xb7/0xd0 [i915]
[26620.095704] ttm_bo_evict_cb+0x6e/0xd0 [ttm]
[26620.095705] ttm_lru_walk_for_evict+0xa6/0x200 [ttm]
[26620.095708] ttm_bo_alloc_resource+0x185/0x4f0 [ttm]
[26620.095709] ? init_object+0x62/0xd0
[26620.095712] ttm_bo_validate+0x7a/0x180 [ttm]
[26620.095713] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095714] __i915_ttm_get_pages+0xb0/0x170 [i915]
[26620.095737] i915_ttm_get_pages+0x9f/0x150 [i915]
[26620.095759] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095786] ? alloc_debug_processing+0xd0/0x100
[26620.095787] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095788] ? i915_vma_instance+0xa0/0x4e0 [i915]
[26620.095822] __i915_gem_object_get_pages+0x2f/0x40 [i915]
[26620.095848] i915_vma_pin_ww+0x706/0x980 [i915]
[26620.095875] ? i915_gem_do_execbuffer+0xedc/0x2b40 [i915]
[26620.095904] eb_validate_vmas+0x170/0xa00 [i915]
[26620.095930] i915_gem_do_execbuffer+0x1201/0x2b40 [i915]
[26620.095953] ? alloc_debug_processing+0xd0/0x100
[26620.095954] ? _raw_spin_unlock_irqrestore+0x16/0x30
[26620.095955] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.095977] ? __wake_up_sync_key+0x32/0x50
[26620.095979] ? i915_gem_execbuffer2_ioctl+0xc9/0x240 [i915]
[26620.096001] ? __slab_alloc.isra.0+0x67/0xc0
[26620.096003] i915_gem_execbuffer2_ioctl+0x11a/0x240 [i915]
Results from decode_stacktrace.sh pointed to dereference of a file pointer
field of a i915 TTM page vector container associated with an object being
purged on eviction. That path is taken when the object is marked as no
longer needed.
Code analysis revealed a possibility of the i915 TTM page vector container
being replaced with a new instance inside a function that purges content
of the object, should it be still busy. That function is called,
indirectly via a more general function that changes the object's placement
and caching policy,
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix use-after-free in llcp_sock_release()
llcp_sock_release() unconditionally unlinks the socket from the local
sockets list. However, if the socket is still in connecting state, it
is on the connecting list.
Fix this by checking the socket state and unlinking from the correct list. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6: vti: Use ip6_tnl.net in vti6_changelink().
ip netns add ns1
ip netns add ns2
ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7
ip -n ns1 link set vti6_test netns ns2
ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9
ip netns del ns2
ip netns del ns1
[ 132.495484] ------------[ cut here ]------------
[ 132.497609] kernel BUG at net/core/dev.c:12376!
Commit 61220ab34948 ("vti6: Enable namespace changing") dropped
NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then
move through IFLA_NET_NS_FD. After the move dev_net(dev) points
at the new netns while t->net stays at the creation netns.
vti6_changelink() and vti6_update() still use dev_net(dev) and
dev_net(t->dev). They unlink from one per netns hash and relink
into another. The creation netns is left with a stale entry.
cleanup_net() of that netns later walks freed memory.
Reachable from an unprivileged user namespace (unshare --user
--map-root-user --net). Cross tenant scope on container hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link()
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine. |
| In the Linux kernel, the following vulnerability has been resolved:
keys: Pin request_key_auth payload in instantiate paths
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.] |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: fix potential use-after-free in exfat_find_dir_entry()
In exfat_find_dir_entry(), the buffer_head obtained from
exfat_get_dentry() is released with brelse(bh) before the fall-through
TYPE_EXTEND branch reads the directory entry through ep (which points
into bh->b_data):
brelse(bh);
if (entry_type == TYPE_EXTEND) {
...
len = exfat_extract_uni_name(ep, entry_uniname);
...
}
After brelse() drops our reference, nothing guarantees that the
underlying page backing bh->b_data remains valid for the subsequent
exfat_extract_uni_name() read. This is the same pattern fixed in
commit fc961522ddbd ("exfat: Fix potential use after free in
exfat_load_upcase_table()").
Move brelse(bh) so it runs after ep is no longer dereferenced on
each branch.
Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y
+ CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image
(long filename with same-hash collisions forcing the TYPE_EXTEND path).
With a debug-only invalidate_bdev() inserted between brelse(bh) and
the ep read to make the stale-deref window deterministic, the
unpatched kernel faults:
BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0
BUG: unable to handle page fault for address: ffff88801a5fa0c2
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0
With this patch applied, the same instrumented harness completes
cleanly under the same sanitizer stack. I have not reproduced a
crash on an uninstrumented kernel under ordinary reclaim; the
instrumented A/B establishes the lifetime violation and that the
patch closes it, not an unaided triggerability claim. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix UAF in __blkcg_rstat_flush()
When multiple blkgs in the same blkcg are released concurrently,
a use-after-free can occur. The race happens when one blkg's
__blkcg_rstat_flush() removes another blkg's iostat entries via
llist_del_all(). The second blkg sees an empty list and proceeds
to free itself while the first is still iterating over its entries.
Move the flush from __blkg_release() (RCU callback) to blkg_release()
(before call_rcu). This ensures the RCU grace period waits for any
concurrent flush's rcu_read_lock() section to complete before freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix slab-use-after-free Read in tipc_aead_decrypt_done
tipc_aead_decrypt() goes straight from tipc_bearer_hold(b) to
crypto_aead_decrypt(req) without taking a reference on the netns, unlike
the encrypt path. When crypto_aead_decrypt() is offloaded asynchronously
(e.g. the SIMD aead wrapper queuing to cryptd), the cryptd worker runs
tipc_aead_decrypt_done() later. If the bearer's netns is torn down in the
meantime, cleanup_net() -> tipc_exit_net() -> tipc_crypto_stop() frees the
per-netns tipc_crypto, and the completion then reads it:
tipc_aead_decrypt_done() dereferences aead->crypto->stats and
aead->crypto->net, and tipc_crypto_rcv_complete() dereferences
aead->crypto->aead[] and the node table -- reading freed memory.
Decoded KASAN splat (v7.1-rc7, CONFIG_KASAN_INLINE + TIPC + TIPC_CRYPTO):
BUG: KASAN: slab-use-after-free in tipc_aead_decrypt_done (net/tipc/crypto.c:999)
Read of size 8 at addr ffff8881056258a8 by task kworker/u16:2/51
Workqueue: events_unbound
Call Trace:
tipc_aead_decrypt_done (net/tipc/crypto.c:999)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 169:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
tipc_crypto_start (net/tipc/crypto.c:1502)
tipc_init_net (net/tipc/core.c:72)
ops_init (net/core/net_namespace.c:137)
setup_net (net/core/net_namespace.c:446)
copy_net_ns (net/core/net_namespace.c:579)
create_new_namespaces (kernel/nsproxy.c:132)
__x64_sys_unshare (kernel/fork.c:3316)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Freed by task 8:
kfree (mm/slub.c:6566)
tipc_exit_net (net/tipc/core.c:119)
cleanup_net (net/core/net_namespace.c:704)
process_one_work (kernel/workqueue.c:3314)
kthread (kernel/kthread.c:436)
This is the same class of bug that commit e279024617134 ("net/tipc: fix
slab-use-after-free Read in tipc_aead_encrypt_done") fixed for the encrypt
side. The encrypt path takes maybe_get_net(aead->crypto->net) before
crypto_aead_encrypt() and drops it with put_net() on the synchronous
return paths and in tipc_aead_encrypt_done(); the -EINPROGRESS/-EBUSY
return keeps the reference for the async callback to release. The decrypt
path was left without the equivalent guard.
Mirror the encrypt-side fix on the decrypt path: take a net reference
before crypto_aead_decrypt() (failing with -ENODEV and the matching
bearer put if it cannot be acquired), keep it across the
-EINPROGRESS/-EBUSY async return, and drop it with put_net() on the
synchronous success/error return and at the end of
tipc_aead_decrypt_done().
Reproduced under KASAN on v7.1-rc7: a UDP bearer with a cluster key is
flooded with crafted encrypted frames from an unknown peer (driving the
cluster-key decrypt path) while the bearer's netns is repeatedly torn
down. The completion must run asynchronously to outlive
tipc_crypto_stop(); on x86 the stock aesni gcm(aes) now decrypts
synchronously, so the async path was exercised via cryptd offload. The
unguarded aead->crypto dereference in tipc_aead_decrypt_done() is the
unpatched upstream path; tipc_aead_decrypt() still lacks
maybe_get_net(aead->crypto->net), so the completion can outlive the free
on any config where crypto_aead_decrypt() goes async.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
pNFS: Fix use-after-free in pnfs_update_layout()
When hitting the NFS_LAYOUT_RETURN branch in pnfs_update_layout(),
the code calls pnfs_prepare_to_retry_layoutget(lo). If it succeeds,
pnfs_put_layout_hdr(lo) is called before trace_pnfs_update_layout(),
which still references 'lo'. This results in a use-after-free when the
tracepoint accesses lo's fields.
Fix this by moving the tracepoint call before pnfs_put_layout_hdr(lo). |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject oversized group bitmap descriptors
ocfs2_validate_gd_parent() only bounds bg_bits against the parent
allocator's chain geometry. A malicious descriptor can still claim a
bg_size/bg_bits pair that exceeds the bitmap bytes that physically fit in
the group descriptor block, so later bitmap scans and bit updates can run
past bg_bitmap.
Add a physical-cap check based on ocfs2_group_bitmap_size() for the parent
allocator type and reject descriptors whose bg_size or bg_bits exceed that
capacity. Keep the existing chain geometry check so both the on-disk
bitmap layout and the allocator metadata must agree before the descriptor
is used.
Validation reproduced this kernel report:
KASAN use-after-free in _find_next_bit+0x7f/0xc0
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xd0/0x630 (?:?)
_find_next_bit+0x7f/0xc0 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x188/0x2f0 (?:?)
kasan_report+0xe4/0x120 (?:?)
ocfs2_find_max_contig_free_bits+0x35/0x70 (fs/ocfs2/suballoc.c:1375)
ocfs2_block_group_set_bits+0x472/0x4b0 (fs/ocfs2/suballoc.c:1457)
ocfs2_cluster_group_search+0x16b/0x440 (fs/ocfs2/suballoc.c:86)
ocfs2_bg_discontig_fix_result+0x1ef/0x230 (fs/ocfs2/suballoc.c:1786)
ocfs2_search_chain+0x8f8/0x10a0 (fs/ocfs2/suballoc.c:1886)
get_page_from_freelist+0x70e/0x2370 (?:?)
lock_release+0xc6/0x290 (?:?)
do_raw_spin_unlock+0x9a/0x100 (?:?)
kasan_unpoison+0x27/0x60 (?:?)
__bfs+0x147/0x240 (?:?)
get_page_from_freelist+0x83d/0x2370 (?:?)
ocfs2_claim_suballoc_bits+0x38c/0xe70 (fs/ocfs2/suballoc.c:96)
sched_domains_numa_masks_clear+0x70/0xd0 (?:?)
check_irq_usage+0xe8/0xb70 (?:?)
__ocfs2_claim_clusters+0x18d/0x4c0 (fs/ocfs2/suballoc.c:2497)
check_path+0x24/0x50 (?:?)
rcu_is_watching+0x20/0x50 (?:?)
check_prev_add+0xfd/0xd00 (?:?)
ocfs2_add_clusters_in_btree+0x17d/0x810 (fs/ocfs2/suballoc.c:?)
__folio_batch_add_and_move+0x1f5/0x3d0 (?:?)
ocfs2_add_inode_data+0xd9/0x120 (fs/ocfs2/suballoc.c:?)
filemap_add_folio+0x105/0x1f0 (?:?)
ocfs2_write_begin_nolock+0x29f7/0x2f80 (fs/ocfs2/suballoc.c:3043)
ocfs2_read_inode_block+0xb5/0x110 (fs/ocfs2/suballoc.c:?)
down_write+0xf5/0x180 (?:?)
ocfs2_write_begin+0x180/0x240 (fs/ocfs2/suballoc.c:?)
__mark_inode_dirty+0x758/0x9a0 (?:?)
inode_to_bdi+0x41/0x90 (?:?)
balance_dirty_pages_ratelimited_flags+0xf8/0x1d0 (?:?)
generic_perform_write+0x252/0x440 (?:?)
mnt_put_write_access_file+0x16/0x70 (?:?)
file_update_time_flags+0xe4/0x200 (?:?)
ocfs2_file_write_iter+0x80a/0x1320 (fs/ocfs2/suballoc.c:?)
lock_acquire+0x184/0x2f0 (?:?)
ksys_write+0xd2/0x170 (?:?)
apparmor_file_permission+0xf5/0x310 (?:?)
read_zero+0x8d/0x140 (?:?)
lock_is_held_type+0x8f/0x100 (?:?) |
