| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the offline profiler feed service of Cisco ISE could allow an authenticated, remote attacker to read arbitrary files that are stored on an affected device.
This vulnerability is due to the parsing of attacker-controlled feed metadata with an XML parser that does not disable external entity resolution. An attacker could exploit this vulnerability by uploading a crafted offline feed package through the administrative interface. A successful exploit could allow the attacker to read arbitrary files from the file system and issue requests to internal systems from the affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| In Flatpak before 1.18.1, a malicious sandboxed app can replace ~/.var/app/$appid/.ld.so with a symlink, causing regenerate_ld_cache to write files at an arbitrary location. The filenames and content are not attacker controlled, making this hard to exploit. |
| Capgo.app before 12.264.5 does not enforce upload expiry or build lifecycle state in the /build/upload/:jobId TUS proxy endpoint. When a native build request is created, an upload_expires_at timestamp (one hour) and a 'pending' status are stored in build_requests, but the upload proxy loads only app_id, owner_org, builder_job_id, and upload_path and checks only the app.build_native permission before forwarding POST, PATCH, and HEAD requests to the internal builder. As a result, an authenticated caller holding app.build_native permission for the app can continue writing to the build upload session after the stored expiry has passed or after the build has moved beyond the upload phase, unless the separate builder service independently rejects the request. The issue is fixed in 12.264.5. |
| FTM 4.x ALL could allow a remote authenticated attacker to obtain sensitive information due to an XML external entity injection flaw. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, OAuth2 isinteger(Exp) guard skips token-expiry checks for float exp. validatetokenexpiry/1 (lines 208-214) and expirytimestamp/1 (138-144) both guard with 'when isinteger(Exp)' and fall through to ok/never for float values. josejwt:verify validates only the signature, not exp. With float exp, no expiry validation occurs anywhere in the If the IdP emits exp as a JSON float (RFC 7519 permits fractional NumericDate), both the login-time expiry check and the mid-connection disconnect timer are silently skipped , an already-expired token is accepted, and connections never time OAuth2 backend enabled IdP emits float exp (uncommon; mainstream IdPs emit integers) Attacker possesses a previously-valid signed. This issue is fixed in versions 4.2.9 and 4.3.3. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
A NULL pointer dereference in klist_put() occurs when a child device (such
as a BNEP network device in bnep_session) is concurrently being
unregistered while hci_conn_del_sysfs() reparents child devices.
This is caused by a race condition between hci_conn_del_sysfs() and
concurrent child device unregistration (e.g. bnep_session calling
unregister_netdev()). During device unregistration, device_del() snapshots
a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the
child device using device_find_any_child() and calls device_move() to
reparent it to NULL, which removes the node from its parent's klist and
clears knode_parent. Subsequently, device_del() calls
klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing
klist_put() to dereference knode_klist(n)->put on an already removed node,
resulting in a NULL pointer dereference.
This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix
use-after-free in device_for_each_child()"), which replaced
device_find_child(..., __match_tty) with device_find_any_child() in
hci_conn_del_sysfs(). That change was intended to avoid a use-after-free
where conn->dev outlived its parent hdev->dev when child devices held
references to conn->dev, because conn->dev only held a reference to
hdev->dev while registered in sysfs.
Fix the issue properly by taking an explicit reference to the parent device
with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with
put_device(parent) in bt_link_release() when the conn device is freed. This
ensures that hdev->dev remains valid for the entire lifecycle of conn->dev,
resolving the underlying use-after-free. With the parent reference held
properly, restore the __match_tty filter in hci_conn_del_sysfs() so that
device_move() is only invoked on persistent RFCOMM TTY devices as
originally intended, eliminating the race condition with unregistering
network devices. |
| Incorrect Authorization (CWE-863) in project name normalization (ProjectUtil.stripGitSuffix) and ProjectCache eviction logic (ProjectCacheImpl) in Gerrit Code Review versions 2.16.0 through 3.12.9, 3.13.0 through 3.13.8, and 3.14.0 through 3.14.2 allows an authenticated user (or an unauthenticated user if the repository was previously public) to cause unauthorized disclosure of private repository content and durable restoration of revoked project-owner administrative privileges via crafted requests using repeated .git suffixes (such as project.git.git) across REST APIs, Gitiles, or SSH Git commands. Because Gerrit strips only a single terminal .git suffix when constructing the logical ProjectCache key while JGit (FileKey.lenient) resolves the suffixed alias to the same canonical bare repository on disk, revoking read access or removing owner rules on the canonical project name fails to evict the cached alias ProjectState during the cache validity window, enabling reads of newly created private commits or writes to refs/meta/config. This issue is fixed in Gerrit Code Review versions 3.12.10, 3.13.9, and 3.14.3. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| Session fixation in HTTP management authentication allows remote attackers to gain unauthorized access to an authenticated management session via reuse of a session identifier retained across successful authentication.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| The door access control on a Norwegian Cruise Line asset grants entry based only on the credential's static 7-byte UID stored on an NTAG212 NFC chip. A UID is a manufacturer serial number sent in the clear on every read and is not intended to be secret or to authenticate the holder. Validating on the UID of the NTAG212 NFC chip alone is identification, not authentication, and the credential has no challenge-response capability that would resist copying. |
| The Botslab G980H dash camera firmware contains a session management vulnerability in which authentication state can remain valid after the associated client connection has been terminated or replaced. Under certain connection conditions, a newly established connection can displace an existing client while previously established session state remains active until a separate expiration mechanism invalidates it. An unauthenticated attacker with adjacent network access could potentially take advantage of this residual authentication state to access functionality associated with another client's session. |
| Apache Airflow: the Core API logout endpoint revokes only a session token presented as the _token cookie. When a client logs out presenting its credential as an Authorization bearer header instead, the endpoint returns its normal logout response but revokes nothing, so the token remains valid until it expires. An attacker who already holds a copy of that token keeps the victim's access after the victim has logged out and believes the session ended; the default token lifetime is 24 hours and is configurable.
Affects API clients that authenticate with a bearer token rather than the browser session cookie. The attacker must already possess a copy of a valid token; obtaining one is outside the scope of this issue, and no privileges beyond the victim's own are gained.
Users of apache-airflow are recommended to upgrade to apache-airflow version 3.3.2 or later, which fixes the issue. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Insufficient Session Expiration vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to Elevation of privileges, Protection mechanism bypass, and Unauthorized access. |
| MaxKB is an open-source AI assistant for enterprise. In 2.10.2-lts and earlier, the /chat/api/mcp authentication path looks up an ApplicationApiKey using only its secret and active status, without enforcing the is_permanent and expire_time checks used by the standard chat API. A previously valid, non-permanent application key that remains active after expiration can initialize the MCP endpoint, list the published application's tool metadata, invoke tools/call, and create durable application_chat and application_chat_record state even though /chat/api/open rejects the same key. No fixed version is available as of this review. |
| Creating a "2dsphere_bucket" index on a non-timeseries bucket collection will succeed, but any subsequent attempt to insert a document which triggers updating that index will crash the server. A similar issue occurs when creating "queryable_encrypted_range" indices.
This issue affects MongoDB Server v7.0 versions prior to 7.0.32, v8.0 versions prior to 8.0.21 and v8.2 versions prior to 8.2.6 |
| MPXJ is an open source library to read and write project plans from a variety of file formats and databases. From 5.5.5 until 16.4.1, MerlinReader creates a DocumentBuilder with default settings while parsing XML from the ZTIMEINTERVALS column of a Merlin project SQLite database, leaving doctype declarations and external entities enabled. A crafted database can cause the parser to read an arbitrary local file, although MPXJ's subsequent handling of the parsed XML makes disclosure of the file contents unlikely. This issue is fixed in version 16.4.1. |
| Datavane TIS v5.0.0 contains an XML external entity (XXE) injection vulnerability that allows authenticated attackers to perform server-side request forgery and out-of-band file exfiltration by supplying a crafted taskScript payload to the doEditWorkflow endpoint, which processes XML through an unhardened DocumentBuilderFactory with external entities and DTD loading enabled. Attackers can send a malicious XML document containing an external DTD reference to the edit_workflow action, causing the server to issue outbound HTTP requests to attacker-controlled infrastructure and exfiltrate local files readable by the TIS process user, including configuration files and Derby database credentials. |
| IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to obtain sensitive information due to an XML external entity (XXE) injection. |
| SigNoz versions from v0.98.0 up to (but not including) v0.143.0, when configured to use the opaque session tokenizer (which was not the default before v0.143.0), do not revoke a user's existing login sessions when the user's password is reset with a reset token (UpdatePasswordByResetPasswordToken, reachable via POST /api/v2/factor_password/reset) or when the user is deleted (DeleteUser, reachable via DELETE /api/v2/users/{id}). Neither code path calls the tokenizer's DeleteTokensByUserID, so cached tokens and identities are left in place. An attacker who already holds a session token for the account — for example from a stolen browser session or from a user being offboarded — retains the account's full access, up to administrator, after a password reset until the token reaches its configured maximum lifetime (30 days by default), and after user deletion until the token next rotates (30 minutes by default). This defeats password reset and user deletion as a means of terminating access. The issue is fixed in v0.143.0. |
| A flaw was found in ModemManager. When parsing a Cell Broadcast Message, some 3GPP data-coding-scheme values (8-bit and reserved character sets) are not handled. The process hits a reachable assertion and aborts. An attacker who can deliver a crafted Cell Broadcast PDU over the radio network, or via a modem AT channel, can cause ModemManager to exit. Repeated aborts can exhaust systemd's default start limit and leave the service failed. |
