| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: Clear affinity hint before calling ath11k_pcic_free_irq() in error path
If a shared IRQ is used by the driver due to platform limitation, then the
IRQ affinity hint is set right after the allocation of IRQ vectors in
ath11k_pci_alloc_msi(). This does no harm unless one of the functions
requesting the IRQ fails and attempt to free the IRQ. This results in the
below warning:
WARNING: CPU: 7 PID: 349 at kernel/irq/manage.c:1929 free_irq+0x278/0x29c
Call trace:
free_irq+0x278/0x29c
ath11k_pcic_free_irq+0x70/0x10c [ath11k]
ath11k_pci_probe+0x800/0x820 [ath11k_pci]
local_pci_probe+0x40/0xbc
The warning is due to not clearing the affinity hint before freeing the
IRQs.
So to fix this issue, clear the IRQ affinity hint before calling
ath11k_pcic_free_irq() in the error path. The affinity will be cleared once
again further down the error path due to code organization, but that does
no harm.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
In clustermd, separate write-intent-bitmaps are used for each cluster
node:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
So in node 1, pg_index in __write_sb_page() could equal to
bitmap->storage.file_pages. Then bitmap_limit will be calculated to
0. md_super_write() will be called with 0 size.
That means the first 4k sb area of node 1 will never be updated
through filemap_write_page().
This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize.
Here use (pg_index % bitmap->storage.file_pages) to make calculation
of bitmap_limit correct. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix Tx L4 checksum
The hardware only supports L4 checksum offload for TCP/UDP/SCTP protocol.
There was a bug to set Tx checksum flag for the other protocol that results
in Tx ring hang. Fix to compute software checksum for these packets. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: must allocate more bytes for RedBox support
Blamed commit forgot to change hsr_init_skb() to allocate
larger skb for RedBox case.
Indeed, send_hsr_supervision_frame() will add
two additional components (struct hsr_sup_tlv
and struct hsr_sup_payload)
syzbot reported the following crash:
skbuff: skb_over_panic: text:ffffffff8afd4b0a len:34 put:6 head:ffff88802ad29e00 data:ffff88802ad29f22 tail:0x144 end:0x140 dev:gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 7611 Comm: syz-executor Not tainted 6.12.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:skb_panic+0x157/0x1d0 net/core/skbuff.c:206
Code: b6 04 01 84 c0 74 04 3c 03 7e 21 8b 4b 70 41 56 45 89 e8 48 c7 c7 a0 7d 9b 8c 41 57 56 48 89 ee 52 4c 89 e2 e8 9a 76 79 f8 90 <0f> 0b 4c 89 4c 24 10 48 89 54 24 08 48 89 34 24 e8 94 76 fb f8 4c
RSP: 0018:ffffc90000858ab8 EFLAGS: 00010282
RAX: 0000000000000087 RBX: ffff8880598c08c0 RCX: ffffffff816d3e69
RDX: 0000000000000000 RSI: ffffffff816de786 RDI: 0000000000000005
RBP: ffffffff8c9b91c0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000302 R11: ffffffff961cc1d0 R12: ffffffff8afd4b0a
R13: 0000000000000006 R14: ffff88804b938130 R15: 0000000000000140
FS: 000055558a3d6500(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1295974ff8 CR3: 000000002ab6e000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
skb_over_panic net/core/skbuff.c:211 [inline]
skb_put+0x174/0x1b0 net/core/skbuff.c:2617
send_hsr_supervision_frame+0x6fa/0x9e0 net/hsr/hsr_device.c:342
hsr_proxy_announce+0x1a3/0x4a0 net/hsr/hsr_device.c:436
call_timer_fn+0x1a0/0x610 kernel/time/timer.c:1794
expire_timers kernel/time/timer.c:1845 [inline]
__run_timers+0x6e8/0x930 kernel/time/timer.c:2419
__run_timer_base kernel/time/timer.c:2430 [inline]
__run_timer_base kernel/time/timer.c:2423 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2439
run_timer_softirq+0x1a/0x40 kernel/time/timer.c:2449
handle_softirqs+0x213/0x8f0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0xbb/0x120 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr()
Extended the `mi_enum_attr()` function interface with an additional
parameter, `struct ntfs_inode *ni`, to allow marking the inode
as bad as soon as an error is detected. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
When ident_pud_init() uses only GB pages to create identity maps, large
ranges of addresses not actually requested can be included in the resulting
table; a 4K request will map a full GB. This can include a lot of extra
address space past that requested, including areas marked reserved by the
BIOS. That allows processor speculation into reserved regions, that on UV
systems can cause system halts.
Only use GB pages when map creation requests include the full GB page of
space. Fall back to using smaller 2M pages when only portions of a GB page
are included in the request.
No attempt is made to coalesce mapping requests. If a request requires a
map entry at the 2M (pmd) level, subsequent mapping requests within the
same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full GB page.
Existing usage starts with larger regions and then adds smaller regions, so
this should not have any great consequence. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden POSIX SID length parsing
posix_info_sid_size() reads sid[1] to obtain the subauthority count,
but its existing boundary check still accepts buffers with only one
remaining byte. Require two bytes before reading sid[1] so all client
paths that reuse the helper reject truncated POSIX SIDs safely. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana: Validate rx_hash_key_len
Sashiko points out that rx_hash_key_len comes from a uAPI structure and is
blindly passed to memcpy, allowing the userspace to trash kernel
memory. Bounds check it so the memcpy cannot overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: fix NOREF dst use in seg6 and rpl lwtunnels
seg6_input_core() and rpl_input() call ip6_route_input() which sets a
NOREF dst on the skb, then pass it to dst_cache_set_ip6() invoking
dst_hold() unconditionally.
On PREEMPT_RT, ksoftirqd is preemptible and a higher-priority task can
release the underlying pcpu_rt between the lookup and the caching
through a concurrent FIB lookup on a shared nexthop.
Simplified race sequence:
ksoftirqd/X higher-prio task (same CPU X)
----------- --------------------------------
seg6_input_core(,skb)/rpl_input(skb)
dst_cache_get()
-> miss
ip6_route_input(skb)
-> ip6_pol_route(,skb,flags)
[RT6_LOOKUP_F_DST_NOREF in flags]
-> FIB lookup resolves fib6_nh
[nhid=N route]
-> rt6_make_pcpu_route()
[creates pcpu_rt, refcount=1]
pcpu_rt->sernum = fib6_sernum
[fib6_sernum=W]
-> cmpxchg(fib6_nh.rt6i_pcpu,
NULL, pcpu_rt)
[slot was empty, store succeeds]
-> skb_dst_set_noref(skb, dst)
[dst is pcpu_rt, refcount still 1]
rt_genid_bump_ipv6()
-> bumps fib6_sernum
[fib6_sernum from W to Z]
ip6_route_output()
-> ip6_pol_route()
-> FIB lookup resolves fib6_nh
[nhid=N]
-> rt6_get_pcpu_route()
pcpu_rt->sernum != fib6_sernum
[W <> Z, stale]
-> prev = xchg(rt6i_pcpu, NULL)
-> dst_release(prev)
[prev is pcpu_rt,
refcount 1->0, dead]
dst = skb_dst(skb)
[dst is the dead pcpu_rt]
dst_cache_set_ip6(dst)
-> dst_hold() on dead dst
-> WARN / use-after-free
For the race to occur, ksoftirqd must be preemptible (PREEMPT_RT without
PREEMPT_RT_NEEDS_BH_LOCK) and a concurrent task must be able to release
the pcpu_rt. Shared nexthop objects provide such a path, as two routes
pointing to the same nhid share the same fib6_nh and its rt6i_pcpu
entry.
Fix seg6_input_core() and rpl_input() by calling skb_dst_force() after
ip6_route_input() to force the NOREF dst into a refcounted one before
caching.
The output path is not affected as ip6_route_output() already returns a
refcounted dst. |
| follow-redirects is an open source, drop-in replacement for Node's `http` and `https` modules that automatically follows redirects. Prior to 1.16.0, when an HTTP request follows a cross-domain redirect (301/302/307/308), follow-redirects only strips authorization, proxy-authorization, and cookie headers (matched by regex at index.js). Any custom authentication header (e.g., X-API-Key, X-Auth-Token, Api-Key, Token) is forwarded verbatim to the redirect target. This vulnerability is fixed in 1.16.0. |
| In importWrappedKey of KMKeymasterApplet.java, there is a possible way access keys that should be restricted due to improper input validation. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In multiple locations, there is a possible way to bypass the cross profile intent filter due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (part 1)
Fix the easy cases where procfs currently calls ptrace_may_access() without
exec_update_lock protection, where the fix is to simply add the extra lock
or use mm_access():
- do_task_stat(): grab exec_update_lock
- proc_pid_wchan(): grab exec_update_lock
- proc_map_files_lookup(): use mm_access() instead of get_task_mm()
- proc_map_files_readdir(): use mm_access() instead of get_task_mm()
- proc_ns_get_link(): grab exec_update_lock
- proc_ns_readlink(): grab exec_update_lock |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: mask server-provided mode to 07777 in modefromsid
When modefromsid is active, parse_dacl() applies the server-provided
sub_auth[2] value from the NFS mode SID to cf_mode without masking to
07777. Apply the correct masking, same as in the read path. |
| In the Linux kernel, the following vulnerability has been resolved:
proc: protect ptrace_may_access() with exec_update_lock (FD links)
proc_pid_get_link() and proc_pid_readlink() currently look up the task from
the pid once, then do the ptrace access check on that task, then look up
the task from the pid a second time to do the actual access.
That's racy in several ways.
To fix it, pass the task to the ->proc_get_link() handler, and instead of
proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that
looks up and locks the task, does the access check, and calls
->proc_get_link(). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: add sanity check for channel array
Fail gracefully if there is no channel array attached to the mailbox
controller. Otherwise the later dereference will cause an OOPS which
might not be seen because mailbox controllers might instantiate very
early. Remove the comment explaining the obvious while here. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: add mutex to guard hook reference counting
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: restrict SO_ATTACH_FILTER to priv users
This patch restricts the use of SO_ATTACH_FILTER (cBPF) on TCP sockets
to users with CAP_NET_ADMIN capability.
This blocks potential side-channel attack where an unprivileged application
attaches a filter to leak TCP sequence/acknowledgment numbers. |
