| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Protection mechanism failure in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker to bypass web origin policy via a crafted HTML page. (Chromium security severity: Medium) |
| Incorrect provision of specified functionality in Mobile in Google Chrome on on iOS prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to bypass web origin policy via crafted network traffic. (Chromium security severity: Medium) |
| NVIDIA TensorRT contains a vulnerability where an attacker can cause an out of bounds read. A successful exploit of this vulnerability may lead to denial of service. |
| The Gitea web route for deleting tags (`POST /{owner}/{repo}/tags/delete`) requires only write access to the Code unit, but shares its handler with release deletion and did not check that the target was a plain tag. A collaborator with Code write access and without Releases write access could permanently delete published releases of that repository, including their attachments. Protected tag rules covering the release tag still blocked the deletion. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid integer underflow with ffs in EOP ring size calc
The low 6 bits of cp_hqd_eop_control store the base-2 logarithm
of the EOP ring size. This was calculated as
ffs(q->eop_ring_buffer_size / sizeof(unsigned int)) - 1 - 1
But ffs can in theory return 1 or 0, so this could underflow
(although in practice the ring buffer size cannot be less than 4096).
Change this to
ffs(q->eop_ring_buffer_size / sizeof(unsigned int) / 4)
using properties of logarithms.
(cherry picked from commit 4f18c56630383c14bfc6b2d65f88f2f895d2121a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix out-of-bounds write in gud_plane_atomic_check()
The plane property loop uses req->properties[num_properties + i] as write
index while simultaneously incrementing `num_properties` inside the loop.
At iteration i, num_properties has also incremented by i, so the write
is done at `initial_num_properties + 2*i`, skipping every other index and
advancing by 2 per iteration.
With just 2 connector and 32 plane properties the last write happens at
index 64, one slot past the end of the 64-slot (indices 0–63)
allocation. A USB device can trigger OOB by advertising the maximum
number of properties.
Fix by dropping the redundant `+ i`; num_properties is already the correct
running index, as gud_connector_fill_properties() fills the preceding
slots. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count
SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter,
and is meant to sit above any value that counter can reach. However, it
is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system
with 4 KiB pages the flag collides with the usage count once that count
reaches 4 TiB.
swap_usage_in_pages() masks bit 30 out, so whenever the real count has
that bit set, every caller of it reads 4 TiB low:
* /proc/swaps understates Used by 4 TiB.
* A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its
"if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff
tears the device down while pages are still swapped out. Nothing in
the rest of swapoff aborts the teardown, so those pages are lost.
Independently of swapoff, the collision also corrupts the counter and the
plist. On a device in normal use, a free that leaves bit 30 set in the
count makes swap_usage_sub() see the flag where there is only count, and
call add_to_avail_list(). It clears the bit with
fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below
the real one, and calls plist_add() on a device that is already listed,
tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking
the node a second time.
Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on
atomic_long_t instead. Note that the usage counter field itself is of
this same type, so it is still a valid bit. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libahci: clear PxCLBU and PxFBU for AHCI_HFLAG_32BIT_ONLY
A user reported that commit 105c42566a55 ("ata: ahci: force 32-bit DMA for
JMicron JMB582/JMB585") made the JMicron JMB585 unusable on his board.
The failure is seen as soon as the ahci driver is probed, and booting with
iommu=off does not solve the problem.
Looking at the AHCI specification, PxCLBU and PxFBU are both read only '0'
for HBAs that do not support 64-bit addressing.
For HBAs that do support 64-bit addressing, the registers are read write,
with a reset value that is Implementation Specific.
When using the AHCI_HFLAG_32BIT_ONLY flag, the HBA does support 64-bit
addressing, and a 32-bit DMA mask is set by simply clearing HOST_CAP_64.
Thus, in this case, we need to explicitly clear the registers to 0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: cortina: Ack RX overrun interrupt correctly
The RX overrun interrupt is reported in interrupt status register 4, but
gmac_irq() acknowledges it using the RX descriptor error bit from status
register 0. For GMAC0 this writes the GMAC1 overrun bit, while for GMAC1
the shift leaves no bit in the 32-bit register.
Acknowledge the same per-port RX overrun bit that was detected. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: check IP header size in cfg80211_classify8021d()
A frame that looks like IP can be transmitted, but be too short, so
the DS field is read incorrectly:
BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180
__ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304
ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538
...
packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108
Use skb_header_pointer() like the MPLS case. |
| Race condition in WebAudio in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to potentially leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| src/internal.c in wolfSSL wolfSSH through 1.5.0 admits the server-to-client Diffie-Hellman group exchange messages SSH_MSG_KEX_DH_GEX_GROUP (31) and SSH_MSG_KEX_DH_GEX_REPLY (33) when a server receives them from an unauthenticated client. IsMessageAllowedServer() applies no direction check to the key exchange message range: when the peer is keying and no particular message is expected, which is the state a server is in for the whole window after it processes the client's KEXINIT because nothing sets handshake->expectMsgId there, the function falls out of its expectation branch without a verdict and reaches a numeric bound that admits every message id from 30 through 34. A client that negotiates diffie-hellman-group-exchange-sha256 and then sends message 31 makes the server run the client-side handler DoKexDhGexGroup(), which validates the attacker-supplied group with two 8-round Miller-Rabin primality tests, one on p and one on (p-1)/2, on a value of up to 8192 bits. The handler then returns success: the server stores the attacker's prime and generator, generates a Diffie-Hellman key pair in the attacker's group, and sends the client-role message SSH_MSG_KEX_DH_GEX_INIT (32) back to the attacker. Published RFC 3526 safe primes are the worst-case input and cost the attacker nothing to obtain. The primality validation was added in 1.5.0; versions from 1.2.0 through 1.4.22 admit the same message and enter the same client-role path without the primality cost. Message 33 is admitted as well, but on a server it is rejected before any cryptography because no public key check callback is registered, so it carries no comparable cost. Builds that define WOLFSSH_NO_DH_GEX_SHA256, which is implied by WOLFSSH_NO_DH or NO_SHA256, are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq->mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has already stopped the host, so no new requests can
arm the work.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: ms_block: destroy io_queue workqueue on removal
msb_init_disk() creates the per-card ordered workqueue msb->io_queue with
alloc_ordered_workqueue(). It is torn down with destroy_workqueue() only
on the init error path; msb_remove() never destroys it. msb_stop() merely
flushes the queue, and neither msb_data_clear() nor put_disk() free it. As
a result every card insert/remove cycle leaks the workqueue and its
kworker, exhausting kernel memory over repeated cycles.
Destroy the workqueue in msb_remove() after the disk has been removed and
the queue drained. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: Fix v9fs_issue_write() to update i_size and remote_i_size
Fix v9fs_issue_write() to update i_size and remote_i_size to the new size
of the server file if we made it larger, using the start fpos and the count
returned by p9_client_write() to calculate the new minimum file size.
This assumes that if the 9P server makes a short write (say it hits
ENOSPC), a reduced count is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check ras and obj before dereference
nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj
without checking either for NULL. Both amdgpu_ras_get_context() and
amdgpu_ras_find_obj() can return NULL, e.g. during the window between
adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to
enable the fatal-error interrupt as soon as possible) and the PCIE_BIF
ras object actually being created in RAS late_init. Any interrupt in that
window crashes in hard-IRQ context.
This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning
dereferencing obj for nbio_v7_4"), which fixed the same issue in the
nbio_v7_4 handler.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3) |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: use timer_shutdown_sync() to prevent timer rearming during teardown
In drop_monitor teardown paths (net_dm_trace_off_set(),
net_dm_hw_monitor_stop(), and error unwind paths in net_dm_trace_on_set()
and net_dm_hw_monitor_start()), per-CPU timers are stopped using
timer_delete_sync() followed by cancel_work_sync().
However, there is a circular dependency between send_timer and
dm_alert_work:
1) sched_send_work() (timer callback) schedules dm_alert_work.
2) send_dm_alert() / net_dm_hw_summary_work() calls reset_per_cpu_data()
or net_dm_hw_reset_per_cpu_data().
3) If memory allocation fails under memory pressure in the reset
function, it re-arms the timer via mod_timer(&data->send_timer, ...).
If dm_alert_work is running concurrently while timer_delete_sync()
executes on another CPU, an allocation failure in the worker will
re-arm the timer after timer_delete_sync() has already returned.
Once cancel_work_sync() completes and module_put() is called, the timer
remains active in the timer wheel. If the module is then unloaded, the
timer will fire and execute sched_send_work() in freed memory,
triggering a kernel panic / use-after-free.
Switch from timer_delete_sync() to timer_shutdown_sync(). This guarantees
that any in-flight timer handler has finished and prevents subsequent
re-arming attempts from running workers from succeeding. When monitoring
is restarted later, timer_setup() is invoked, which cleanly
re-initializes the timer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering a WARN_ON_ONCE()
in ip_rt_bug() as bellow:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
ip_push_pending_frames+0xfa/0x100
__icmp_send+0x905/0xf10
ip_options_compile+0xc0/0xd0
ip_rcv_finish_core+0x321/0xae0
ip_rcv+0x1de/0x260
__netif_receive_skb_one_core+0x11a/0x130
netif_receive_skb+0x7b/0x260
tun_get_user+0x11bf/0x1c10
------------[ cut here ]------------
Reject input route that is RTN_UNREACHABLE to fix it. The net warning
is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of
a race condition. |
