| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| DJI drones transmit DUML (DJI Universal Markup Language) protocol messages over BLE (Bluetooth Low Energy) without encryption. When a client attempts to connect to the drone over Wi-Fi, or when the drone is switched to QuickTransfer mode, the DJI Fly application exchanges DUML messages with the drone over BLE, including the Wi-Fi credentials. An attacker within BLE range can passively sniff this traffic and recover the credentials in cleartext, including the drone's Wi-Fi PSK, SSID, and trusted identifier UUID. Obtaining these credentials allows the attacker to join the drone's internal Wi-Fi network, interact with network services exposed by the drone, and decrypt Wi-Fi traffic exchanged between the drone and the legitimate user.
* An attacker within BLE range recovers the Wi-Fi SSID and PSK in cleartext, and can then join the drone's network
* The same capture also exposes the session UUID identifier, which is the only thing the drone uses to tell a trusted client from an unknown one, so the attacker can replay it and skip the physical confirmation of new connected devices.
* The credentials do not change between sessions unless the operator manually resets the Wi-Fi settings, so one capture stays valid indefinitely
* The attack is fully passive, with nothing transmitted and no connection made, so neither the operator nor the drone has any indication the session was observed
* A BLE sniffer and presence during one normal DJI Fly connection are needed
Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600.
Remediation requires a firmware update from the vendor. There is no user-side mitigation that fully addresses the vulnerability without upgrading. |
| Open Source Social Network (OSSN) through 10.1 contains a missing authorization vulnerability in ossn_album_page_handler that allows unauthenticated attackers to download files via album/getphoto and album/getcover. Attackers can enumerate sequential file GUIDs to retrieve friends-only album photos and other stored files without any access check. |
| DJI drones expose an unauthenticated DUML command interface over Bluetooth that allows an attacker within Bluetooth range to modify Wi-Fi configuration parameters, including the SSID, PSK, MAC address, regulatory country code, and wireless channel. An attacker can overwrite the Wi-Fi PSK with a known value and connect to the drone's internal Wi-Fi network, potentially gaining access to the flight control interface and issuing flight commands. Crafted DUML commands can also disable or restart the Wi-Fi and Bluetooth interfaces, disconnect Wi-Fi clients, or reset wireless configuration, resulting in a denial-of-service condition that can disrupt the operator's wireless control, video, and telemetry connections during flight.
Affected models are DJI Neo until 01.00.0400, DJI Neo 2 until 01.00.0500, DJI Flip until 01.00.1200, DJI Air 3 until 01.00.1600, DJI Air 3S until 01.00.1400, DJI Avata 2 until 01.00.0400, DJI Avata 360 until 01.00.0300, DJI Mavic 3 until 01.00.1400, DJI Mavic 3 Classic until 01.00.0800, DJI Mavic 3 Pro until 01.01.0700, DJI Mavic 4 Pro until 01.00.0500, DJI Mini 2 until 01.07.0200, DJI Mini 3 until 01.00.0500, DJI Mini 3 Pro until 01.00.0900, DJI Mini 4 Pro until 01.00.1100, and DJI Mini 5 Pro until 01.00.0600.
Remediation requires a firmware update from the vendor. |
| A security vulnerability has been detected in meetecho janus-gateway up to 1.4.2. This vulnerability affects unknown code of the file html/demos/admin.js of the component Admin API. Such manipulation leads to hard-coded credentials. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. |
| On affected platforms running Arista EOS, the global common encryption key configuration may be logged in clear text, in local or remote accounting logs. Knowledge of both the encryption key and protocol specific encrypted secrets from the device running-config could then be used to obtain protocol specific passwords in cases where symmetric passwords are required between devices with neighbor protocol relationships. |
| ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage. |
| A vulnerability was identified in agno-agi agno up to 2.7.3/3.0.6. This affects the function get_authentication_dependency of the file auth.py. Such manipulation of the argument security_key leads to missing authentication. The attack may be launched remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The Admin and Customer Messages After Order for WooCommerce: OrderConvo WordPress plugin through 15.1 does not validate the path of files to be downloaded, which could allow unauthenticated users (before version 15.0) and any authenticated user such as a Subscriber (versions 15.0 to 15.1) to read arbitrary files on the server via a path traversal attack; the fix released in version 14 was incomplete and no fixed version is available. |
| Duplicate of CVE-2026-71364, which was publicly disclosed and fixed in Red Hat Ansible Automation Platform on 2026-08-24. No separate identifier is required. |
| A flaw has been found in SEMCMS up to 5.0. This impacts an unknown function of the file SEMCMS_Banner.php. Executing a manipulation can lead to sql injection. It is possible to launch the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Decouple sched_cache_group from mm to fix UAF
Currently the sched cache grouping is by mm and the scheduling statistics
sched_cache_stat lives in the mm structure. This ties the life cycle
of scheduling stats with mm.
In account_mm_sched(), the scheduling stats are accessed by
task->mm->sc_stat. However, a task may be switching mm on one CPU when
another CPU is running account_mm_sched(), and possibly accessing the
old mm that was freed. This problem was found when running tests with
KASAN by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
Instead of serializing the mm access by introducing extra acquisition of
rq lock in the mm free path, extract sched_cache_stat from mm_struct,
rename it as sched_cache_group and manage its life cycle apart from
mm_struct with its own ref counting. This allows us in the next patch
access sched_cache_group directly from task, and add a refcount
on sched_cache_group when a task links to it. This prevents the use
after free issue when accessing stale and released old mm and its
sched cache stat a task switches to a new mm while account_mm_sched()
is done elsewhere.
The other benefit of this restructure is in the future, the grouping of
tasks to a LLC would have the flexibility to be associated with a user
defined grouping, or cgroup, cookie group, numa_group or others instead
of just with a single mm address space.
Rename sched_cache_stat to sched_cache_group and turn it into a refcounted
object allocated from mm_struct. The mm_struct now holds a pointer
(sched_cache_grp) to this object instead of embedding it. |
| A flaw was found in the Qute template engine, which is used by Quarkus to generate dynamic content like HTML pages or emails. The issue exists in the component responsible for looking up data values (ReflectionValueResolver), which fails to properly block access to sensitive Java internal functions when processing certain data types like Enums. An attacker who can provide or influence the template text can exploit this bypass to take control of the server by executing unauthorized commands. |
| A weakness has been identified in y_project RuoYi up to 4.8.3. This affects the function renderDrawer of the file /system/dict/data/add of the component Dictionary Data Drawer Preview. Executing a manipulation of the argument cssClass can lead to cross site scripting. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in tsi-coop tsi-dpdp-cms 0.5.0/0.5.1/0.5.2. Impacted is an unknown function of the component JSON Schema Validation. The manipulation of the argument _func results in information disclosure. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 0.5.3 is recommended to address this issue. You should upgrade the affected component. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product. |
| Out-of-bounds write in libcodec2-sec-flacdec.so prior to SMR Oct-2026 Release 1 allows local attackers to write out-of-bounds memory. |
| Improper access control in CocktailBarService prior to SMR Oct-2026 Release 1 allows local attackers to access sensitive information. |
| Improper access control in DownloadProvider prior to SMR Oct-2026 Release 1 allows local attackers to access files in scoped storage. |
| A flaw was found in GIMP's PNM file format parser. When parsing a specially crafted PNM file, the pnmscanner_gettoken() function writes a null terminator one byte past the end of a stack-allocated buffer due to an off-by-one error in the loop boundary check. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution. |
| A heap-buffer-overflow vulnerability exists in the APNG (Animated PNG) file loader of GIMP. This flaw occurs when the `fcTL` width exceeds the `IHDR` width, leading to pixel data being written past the end of a heap allocation. Additionally, a heap-based buffer overflow exists in the DDS plug-in due to a BPP mismatch in the `load_layer()` function. Both vulnerabilities can be triggered by opening a specially crafted image file, potentially leading to code execution. |
| A flaw was found in the file-fits plugin in GIMP. When processing a FITS image file, the plugin calculates memory allocation sizes using signed 32-bit integers for width and height. If a crafted file sets both values to large values, their product exceeds 2^31 and overflows, resulting in an undersized heap-based buffer allocation. This integer overflow issue results in a heap-based buffer overflow when cfitsio subsequently writes a full row of pixels in the buffer, causing memory corruption, potentially leading to arbitrary code execution or a denial of service. |
