| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in AivahThemes Hostme v2 hostmev2 allows DOM-Based XSS.This issue affects Hostme v2: from n/a through 7.0. |
| 53AIHub through 0.5.3 contains a missing authentication vulnerability that allows unauthenticated attackers to overwrite any enterprise's profile by sending PUT requests to /api/enterprises/:id. Because UpdateEnterprise only enforces checks when IS_SAAS is true, attackers can enumerate sequential enterprise IDs and overwrite logos, display names and branding for defacement and phishing. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: rtsx_usb_ms: complete requests after eject instead of dropping them
memstick_check() can pass its host->removing check just before
rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then
silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject
is set, and drv_remove's cancel_work_sync() can also cancel a queued
handle_req before it picks the request up. Nobody completes
card->mrq_complete.
Once memstick core waits for requests without a timeout ("memstick: core:
wait for request completion before freeing card"), this hangs removal:
memstick_check() never returns and memstick_remove_host() blocks in
flush_workqueue():
INFO: task kworker/u10:3:65 blocked for more than 20 seconds.
Workqueue: kmemstick memstick_check
__wait_for_common
memstick_check
INFO: task kworker/1:1:33 blocked for more than 20 seconds.
Workqueue: usb_hub_wq hub_event
__flush_workqueue
memstick_remove_host
rtsx_usb_ms_drv_remove
Never drop a request. rtsx_usb_ms_request() always schedules handle_req,
and handle_req fails requests with -ENOMEDIUM once eject is set, without
touching the device. drv_remove flushes handle_req instead of cancelling
it, and cancels it only after memstick_remove_host(), when no new
request can arrive, so it cannot run on a freed host.
The host_mutex drain in drv_remove is removed: handle_req always leaves
host->req NULL when it finishes, so the drain never had anything to do,
and it would now race with handle_req. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: RCU-delay the freeing of struct fsverity_info
__fsverity_get_info() calls rhashtable_lookup_fast(), which just uses
rcu_read_lock() and doesn't directly synchronize with
fsverity_remove_info().
For the same inode this isn't a problem: its fsverity_info is removed
only at inode eviction time or upon failure to enable verity, when the
inode no longer needs its fsverity_info and it will no longer be
accessed via that inode.
However, this is broken and can cause a use-after-free for concurrent
__fsverity_get_info() for *different* inodes. Those rely on following
fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only.
They also use fsverity_info::inode to do the key comparison.
Fix this by RCU-delaying the freeing of 'struct fsverity_info' after
it's been removed from the rhashtable. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts
When an NFSv4 filesystem exported with security_label is mounted a
second time, sget_fc() returns the existing superblock and
nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the
superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an
early exit without setting SECURITY_LSM_NATIVE_LABELS in
*set_kern_flags. nfs_get_root() then sees kflags without
SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on
the shared nfs_server, silently disabling per-file labeling for both
the new and the original mount.
Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS
on reused superblock") fixed the same problem in
selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain
second mount now goes through sb_set_mnt_opts rather than
sb_clone_mnt_opts, so it needs the same treatment: on both
SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in
*set_kern_flags when the superblock was already using
SECURITY_FS_USE_NATVE. |
| Conda Organization Infrastructure is a centralized location for infrastructure codes. Prior to commit 9c0f238, a GitHub Actions Pwn Request vulnerability appears to remain present in conda/conda. The affected workflow is .github/workflows/update.yml. It is triggered by issue_comment events containing @conda-bot render or @conda-bot recreate. For the render path, the workflow obtains the pull request head repository and branch from the PR API, checks out that PR-controlled repository/ref using secrets.SYNC_TOKEN, and then runs conda/actions/template-files@7f6830b1428a9bd47f0b068892c77eae95207037. The external template-files action reads its default configuration and templates from the checked-out working directory. In the confirmed finding, that action uses an unsandboxed Jinja2 environment to render attacker-controlled template content. This creates a Pwn Request chain in which an untrusted PR/comment path can reach template rendering in a privileged token context. This issue has been patched via commit 9c0f238. |
| Buffer over-read in Windows Overlay Filter allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Windows Overlay Filter allows an authorized attacker to elevate privileges locally. |
| Improper link resolution before file access ('link following') in Windows AppX Deployment Service allows an authorized attacker to disclose information locally. |
| Out-of-bounds read in Desktop Window Manager allows an authorized attacker to disclose information locally. |
| Null pointer dereference in Windows VMSwitch allows an authorized attacker to deny service locally. |
| Use after free in Windows Cryptographic Services allows an authorized attacker to execute code over a network. |
| Heap-based buffer overflow in Windows Subsystem for Linux allows an authorized attacker to elevate privileges locally. |
| Missing release of memory after effective lifetime in Remote Desktop Gateway Service allows an unauthorized attacker to deny service over a network. |
| Improper enforcement of behavioral workflow in Windows DNS allows an unauthorized attacker to deny service over a network. |
| Incorrect authorization in DNS Server allows an authorized attacker to perform tampering locally. |
| Heap-based buffer overflow in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: harden adjust_idledly() against divide-by-zero and overflow
adjust_idledly() has several corner-case issues flagged during review:
1. If xe_gt_clock_init() failed to recognise the crystal clock,
gt->info.timestamp_base is 0, which makes idledly_units_ps also 0.
The subsequent DIV_ROUND_CLOSEST(..., idledly_units_ps) is then a
divide-by-zero and panics the kernel.
2. The tick-to-ns conversions are done in u32:
idledly * idledly_units_ps, (maxcnt - 1) * 1000
Both overflow u32 before DIV_ROUND_CLOSEST() sees them.
3. If IDLE_WAIT_TIME reads back as 0, maxcnt evaluates to 0 and
the maxcnt - 1 clamp wraps to 0xFFFFFFFF in u32.
4. The register only stores whole ticks, so the clamped ns value has
to be converted to ticks and back. DIV_ROUND_CLOSEST() can round
that conversion up past maxcnt:
maxcnt = 640 ns, one tick = 666664 ps
clamp: maxcnt - 1 = 639 ns
ns -> ticks: 639000 / 666664 = 0.958 -> rounds to 1 tick
tick -> ns: 1 * 666664 / 1000 = 667 ns
667 ns is programmed into RING_IDLEDLY, but 667 >= maxcnt (640),
so xe_gt_WARN_ON() fires again on every subsequent init.
Return early if timestamp_base is 0 (the unknown-crystal path).
Do the conversions in u64 via the *_ULL() helpers so they cannot wrap.
Clamp with a floor (DIV_ROUND_DOWN_ULL) so the programmed delay stays
strictly below maxcnt, and guard the maxcnt == 0 case with a zero delay
while still writing RING_IDLEDLY so INHIBIT_SWITCH_UNTIL_PREEMPTED is
cleared.
v2: Drop the redundant warn on the timestamp_base == 0 path;
xe_gt_clock_init() already warns on an unrecognised crystal clock.
Keep the early return to avoid the divide-by-zero. - Vinay
v3: Field-mask the RING_IDLEDLY write with REG_FIELD_PREP(IDLE_DELAY, ...)
instead of writing the raw tick count, which could clobber
INHIBIT_SWITCH_UNTIL_PREEMPTED and reserved bits. Split the
inhibit-switch clear from the maxcnt clamp so a set inhibit bit no
longer forces a needless delay overwrite when the delay itself is
already valid. Use gt_to_xe(gt) instead of gt_to_xe(hwe->gt).
(cherry picked from commit d864065ea25e9d12897c175de9176ce46677e176) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove sink usage from DPMS
[Why]
stream->sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper getter
* Formatting fixes |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
which is now allocated at VM creation, sized to the absolute maximum
that KVM can handle.
In turn, each VCPU_INIT contributes S2_MMU_PER_VCPU to the pool. No
reallocation is ever performed, and the life cycle of each object is
much clearer:
- the nested_mmus array is allocated in kvm_init_nested(), and freed
in kvm_arch_destroy_vm()
- s2_mmu structures are allocated in kvm_vcpu_init_nested(), and freed
on kvm_arch_flush_shadow_all()
Finally, the freeing of vcpu->arch.vncr_array is made consistent
rather than being done on some failure paths, but not others. |
