Export limit exceeded: 420915 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 420915 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (420915 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99202 | 1 Linux | 2 Linux, Linux Kernel | 2026-11-02 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix SMP IO deadlock during HA resume smp_execute_task_sg() calls pm_runtime_get_sync() on the host before issuing an SMP command. When that command is itself issued from the HA resume path, the get_sync() deadlocks: it waits for the ongoing resume (the device is RPM_RESUMING), while the resume is blocked in sas_drain_work() waiting for that same SMP IO to complete. The deadlock needs an expander-attached SATA disk. During sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata() -> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() -> sas_phy_reset() -> sas_smp_phy_control() -> smp_execute_task_sg()). Direct-attached SATA resets through lldd_control_phy() and SSP devices use TMFs, so neither hits this. Replace the get_sync()/put_sync() pair with pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only needs to hold off autosuspend while the SMP is in flight, and it must not try to resume the host: a sync resume issued from the HA resume path itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init has already reinitialized the hardware, so the device is accessible without one. The usage reference is still required. Discovery work normally runs inside an event worker's PM reference, taken at sas_notify_port_event() notify time and held until the handler has flushed the disco queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN from within the revalidation worker itself, and flush_workqueue() does not wait for work items queued during execution, so that chained revalidation runs with no outer PM reference - without the get_noresume(), its SMP could race autosuspend. For the BSG path, sas_smp_handler() is the only caller which may find the host autosuspended: expander SMP requests do not go through any SCSI device request queue, so nothing else in that path holds the host awake. Resume it there with pm_runtime_resume_and_get() and check the result. | ||||
| CVE-2026-115998 | 1 Cervantessec | 1 Cervantes | 2026-11-02 | 4.3 Medium |
| IDOR in Cervantes version v1.3-beta could allow an authenticated attacker ca access sensitive findings, proof-of-concept details, credentials, and client information from projects they do not belong to. Additionally, they can modify finding statuses and transfer findings to their own projects, compromising data confidentiality and integrity. | ||||
| CVE-2026-115994 | 1 Cervantessec | 1 Cervantes | 2026-11-02 | 5.4 Medium |
| BOLA Allows Cross-Project Target Tampering in Cervantes version v1.3-beta could allow an attacker modify or delete targets belonging to other projects without authorization, compromising the integrity of penetration testing scopes, results, and associated security reports. | ||||
| CVE-2026-115993 | 1 Cervantessec | 1 Cervantes | 2026-11-02 | 6.8 Medium |
| Stored XSS vulnerability in the “Notes” field of the Checklists in Cervantes version v1.3-beta could allow an attacker to execute arbitrary code in another user's browser with elevated privileges | ||||
| CVE-2026-97229 | 2 Gitlab, Ruby-lang | 2 Gitlab, Ruby | 2026-11-02 | 10 Critical |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.2 before 19.2.8, 19.3 before 19.3.5, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an unauthenticated user to execute arbitrary code on the GitLab server via a specially crafted regular expression in a CI/CD configuration, due to insufficient regular expression validation. | ||||
| CVE-2026-78077 | 1 Joomshaper | 1 Helix3 Extension For Joomla | 2026-11-02 | N/A |
| Joomla Extension - joomshaper.com - Stored Cross-Site Scripting (XSS) in MegaMenu Layout Container & Embed Inputs in Helix Ultimate < 2.2.11 - Unsanitized column and item configuration values stored within the MegaMenu layout JSON were rendered without complete contextual escaping, allowing injection of malicious HTML/JS. Stricter sanitization and tag allowlists via `InputFilter` and `htmlspecialchars` were implemented. | ||||
| CVE-2026-77026 | 1 Tassos.gr | 1 Convert Forms Component For Joomia | 2026-11-02 | N/A |
| Joomla Extension - tassos.gr - Client-controlled validation bypass in Convert Forms extension 1.0.0-4.4.16, 5.0.0-5.2.5 - CAPTCHA and field validation bypass. | ||||
| CVE-2026-93336 | 1 Canonical | 1 Juju | 2026-11-02 | N/A |
| Missing authorization in the unit resources download route in Canonical Juju 4.0 through 4.0.15 allows a controller-authenticated principal (a unit agent, or a user with only login permission) to read any application's charm resource in any model, including container-registry credentials, via a crafted request naming an arbitrary unit. | ||||
| CVE-2026-92450 | 1 Kiloview | 1 E3 Firmware | 2026-11-02 | 7.5 High |
| The authentication framework used by affected Kiloview E3 NDI encoder firmware signs session JSON Web Tokens using an HMAC-SHA256 secret hardcoded as a static string within the firmware image, identical across all deployed devices. An attacker with access to the publicly distributed firmware can recover this secret and forge arbitrary session tokens, including administrative tokens, without valid credentials, enabling unauthenticated access to privileged device functions. | ||||
| CVE-2026-89315 | 1 Eclipse | 1 Keypont-gose | 2026-11-02 | N/A |
| `JwtClaims.MarshalJSON` built a Go struct at runtime with `reflect.StructOf`, synthesising a field named `"A" + claimName` for each untyped claim. `reflect.StructOf` **panics** when a field name is not a valid Go identifier, or when it duplicates another field. Both conditions are reachable from ordinary JWT claim names. | ||||
| CVE-2026-89314 | 1 Eclipse | 1 Keypont-gose | 2026-11-02 | N/A |
| `jwkFields.CheckConsistency` detected duplicate `key_ops` entries with a pairwise nested loop, making validation cost grow with the **square** of the entry count. Because the check runs on every JWK and JWKS unmarshal, a modestly sized but hostile JWKS document could occupy a CPU core for many seconds. | ||||
| CVE-2026-89313 | 1 Eclipse | 1 Keypont-gose | 2026-11-02 | N/A |
| `JwksTrustStore.Get` assigned each parsed key to the function's **named return value** while refreshing the JWKS cache. When the requested `kid` was not present, the trailing naked `return` handed the caller the last key in the JWKS document together with a `nil` error — a confidently wrong answer instead of "not found". | ||||
| CVE-2026-89312 | 1 Eclipse | 1 Keypont-gose | 2026-11-02 | N/A |
| `AesGcmCryptor.Open` passed a caller-supplied nonce straight to `cipher.AEAD.Open` without checking its length. The Go standard library **panics** rather than returning an error when a GCM nonce is not exactly `NonceSize()` bytes, so a JWE carrying a wrong-sized IV crashes the decrypting goroutine. | ||||
| CVE-2026-79871 | 1 Hpe | 1 Aos | 2026-11-02 | 9.6 Critical |
| A sensitive information disclosure vulnerability in the command line interface of AOS-10 could allow an unauthenticated remote attacker to access sensitive information. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by AOS-10. | ||||
| CVE-2026-79870 | 1 Hpe | 1 Aos | 2026-11-02 | 9.6 Critical |
| An authentication bypass vulnerability in the PAPI protocol of AOS-8 could allow an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain administrative access, modify system configurations, access or manipulate sensitive data, and disrupt network operations. | ||||
| CVE-2026-79869 | 1 Hpe | 1 Aos | 2026-11-02 | 9.6 Critical |
| Authentication bypass vulnerabilities in the affected interface of AOS-10 could allow an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. | ||||
| CVE-2026-77157 | 1 Checkmarx | 1 Ast-cli | 2026-11-02 | 6.4 Medium |
| ast-cli downloads two helper binaries, the Vorpal ASCA real-time engine and the SCA Resolver, from "download.checkmarx.com" as part of its auto-update flow, triggered by the Checkmarx’s "VSCode/JetBrains" extensions and by cx scan "sca-realtime". Prior to the fix, the downloaded archive was not verified against a checksum before extraction and execution. An attacker able to substitute the served archive could deliver an arbitrary binary that ast-cli would extract and execute the contents of the archive, since no integrity check was performed on the download. Successful exploitation requires compromising "download.checkmarx.com" and replacing the served archive with one containing an attacker-controlled binary. If the served archive had been replaced that way, any developer machine or CI pipeline invoking ASCA (via Checkmarx's VSCode/JetBrains extensions) or cx scan "sca-realtime" on an affected version would have extracted and executed that binary in place of the intended download. The download is now verified against a published SHA-256 checksum before extraction. | ||||
| CVE-2026-77156 | 1 Checkmarx | 1 Ast-cli | 2026-11-02 | 6.4 Medium |
| Incomplete validation of extracted archive entry paths in ast-cli's tar extraction logic on Linux and macOS (used when installing the Vorpal ASCA real-time engine and the SCA Resolver) would allow a malicious tar archive containing absolute or traversal path entries to write files outside the install directory. Windows builds were not affected, as the Windows extractor performs this path validation. Exploitation required substituting the archive served at "download.checkmarx.com". An attacker able to compromise that server and replace the archive could write arbitrary, executable files to arbitrary filesystem paths via this path traversal. Extraction now validates that each entry's destination path resolves within the working directory and rejects absolute paths. | ||||
| CVE-2026-19678 | 1 Onphase | 1 Onphase Forms | 2026-11-02 | N/A |
| A server-side request forgery (SSRF) vulnerability in the unauthenticated form service in version 11.0.14 in onPhase Forms allows an unauthenticated remote attacker to access sensitive internal Apache Solr data via an attacker-controlled URL supplied to a publicly accessible form. | ||||
| CVE-2026-19677 | 1 Onphase | 1 Onphase Forms | 2026-11-02 | N/A |
| An authentication bypass vulnerability in the public onPhase/ frevvo registration form version 11.0.14 allows an unauthenticated remote attacker to authenticate as an arbitrary tenant user, obtain TenantAdmin and Designer privileges, and execute arbitrary operating system commands via manipulation of registration parameters containing a valid tenant name and existing user identifier. | ||||