| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Integer overflow or wraparound in Microsoft Windows Codecs Library allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Add checking nr_subbufs to persistent ring buffer validation
Sashiko reported that the code was using meta->nr_subbufs without making
sure that it matched the nr_pages + 1 on data that was assuming the two
were the same.
Add a check to the persistent ring buffer validation code to make sure
that the saved nr_subbufs matches what we expect. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: Serialize command queue publishing
Serialize command queue publishing so software producer state advances only
after a command is written and the hardware tail is updated. Wait for
hardware consumption outside the queue lock when the command queue is full
so other CPUs are not blocked behind a long poll. |
| The SellKit WordPress plugin before 2.8.0 does not validate a client-supplied product price when totals are recalculated during checkout, allowing unauthenticated attackers to place orders for any purchasable product at a price of their own choosing. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: make sure EXTENT_BUFFER_READING is cleared under refs_lock
[FALSE ALERTS]
There is a bug report that the warning inside
invalidate_and_check_btree_folios() got triggered during btrfs/298:
BTRFS info (device sdd): first mount of filesystem f9bf732a-a19b-44b9-99a7-614ddff168e2
BTRFS info (device sdd): using crc32c checksum algorithm
BTRFS error (device sdd): failed to find fsid cb2fdb42-b638-4f2f-badd-4127467ba674 when attempting to open seed devices
BTRFS error (device sdd): failed to read chunk tree: -2
------------[ cut here ]------------
WARNING: disk-io.c:3342 at invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs], CPU#4: mount/125993
CPU: 4 UID: 0 PID: 125993 Comm: mount Tainted: G W OE 7.1.0-rc7-custom+ #1 PREEMPT(full)
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20250812-19.fc42 08/12/2025
Call trace:
invalidate_and_check_btree_folios+0x260/0x3c0 [btrfs] (P)
open_ctree+0x1f50/0x23b0 [btrfs]
btrfs_get_tree+0x89c/0xc48 [btrfs]
vfs_get_tree+0x30/0x110
vfs_cmd_create+0x58/0xe8
__arm64_sys_fsconfig+0x39c/0x518
invoke_syscall.constprop.0+0x48/0x120
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x50/0x310
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
---[ end trace 0000000000000000 ]---
BTRFS warning (device sdd): unable to release extent buffer 365985792 owner 3 gen 17 refs 3 flags 0x5
[CAUSE]
In that invalidate_and_check_btree_folios() we wait for the eb to finish
its read, then check if it's only held by us and the btree inode.
If not, then do a warning as it may be still held, and could cause
problems.
But there is a small window where the check can lead to false alerts:
Thread A (Read endio) | Thread B (Unmount)
----------------------------------+-------------------------------------
end_bbio_meta_read() |
| The eb has one extra ref held |
| by the reader, and has |
| EXTENT_BUFFER_READING flag set | invalidate_and_check_btree_folios()
| | |
|- clear_extent_buffer_reading() | |
| | |- wait_on_bit_io();
| | | The EXTENT_BUFFER_READING flag is
| | | cleared
| | |- if (refcount_read(eb->refs) > 2)
| | The eb is held by the read, us
| | and btree inode, thus it
| | will trigger the warning
|- free_extent_buffer() |
[FIX]
Introduce a helper, free_extent_buffer_clear_reading().
If the new parameter, @clear_reading, is set, we will hold the spinlock
at the beginning of free_extent_buffer_clear_reading() to make sure the
EXTENT_BUFFER_READING flag is cleared inside the same critical section
of decreasing refs.
Now free_extent_buffer() will just call
free_extent_buffer_clear_reading() with @clear_reading set to false, so
no behavior change.
But for end_bbio_meta_read(), it will not clear_extent_buffer_reading()
directly, but pass @clear_reading as true.
Then inside invalidate_and_check_btree_folios(), hold the refs_lock
before reading refs.
So that we eliminate the race window completely. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: don't WARN on kernel job timeout when device already wedged
igt@xe_wedged@wedged-at-any-timeout wedges the device in mode 2
(UPON_ANY_HANG_NO_RESET) and then rebinds the driver. During unbind,
a GSC proxy kernel submission can still time out; with the device wedged
and the GuC CT stopped it can never complete, so its kernel job times out.
Tile0: GT1: Kernel-submitted job timed out
WARNING: drivers/gpu/drm/xe/xe_guc_submit.c:...
at guc_exec_queue_timedout_job()
Workqueue: gt-ordered-wq drm_sched_job_timedout
Killed queues skip guc_submit_hint_wedged(), leaving 'wedged' false even
though the device is already wedged. The timeout handler then treats the
kernel queue timeout as unexpected and taints the kernel.
Honour an already-wedged device even for killed queues so the expected
teardown timeout no longer trips the WARN.
(cherry picked from commit a1c1dbd0f047bb05de6aaf6abe9103031179bf19) |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: validate seg_id fields from persistent memory
cache_pos_decode(), cache_key_decode() and the last-kset branches of
cache_replay(), the writeback worker and the GC worker take a cache
segment id from the cache device metadata and index cache->segments[]
with it without checking it against cache->n_segs. That metadata is only
CRC-protected with a fixed public seed, so whoever supplies the cache
device on a table load (CAP_SYS_ADMIN) controls the id; an out-of-range
value forms a wild pcache_cache_segment pointer that is dereferenced and
written through -- an out-of-bounds read and write driven by on-disk data.
Add cache_seg_id_valid() and reject an out-of-range id at each decode
site, failing the operation with -EIO instead of indexing past the array.
Bound the id against the initialized-segment count (cache_info.n_segs)
rather than the physical device total. A forged cache_info.n_segs below
seg_num otherwise leaves segments[cache_info.n_segs..seg_num) as zeroed
structs whose data pointer is NULL, so a forged id in that window would
still be dereferenced. A later patch guarantees cache_info.n_segs <=
seg_num, and a driver-created cache sets the two equal, so valid images
are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
uprobes/x86: Move optimized uprobe from nop5 to nop10
Andrii reported an issue with optimized uprobes [1] that can clobber
redzone area with call instruction storing return address on stack
where user code may keep temporary data without adjusting rsp.
Fixing this by moving the optimized uprobes on top of 10-bytes nop
instruction, so we can squeeze another instruction to escape the
redzone area before doing the call, like:
lea -0x80(%rsp), %rsp
call tramp
Note the lea instruction is used to adjust the rsp register without
changing the flags.
We use nop10 and following transformation to optimized instructions
above and back as suggested by Peterz [2].
Optimize path (int3_update_optimize):
1) Initial state after set_swbp() installed the uprobe:
cc 2e 0f 1f 84 00 00 00 00 00
From offset 0 this is INT3 followed by the tail of the original
10-byte NOP.
After a previous unoptimization bytes 5..9 may still contain the
old call instruction, which remains valid for threads already there.
2) Rewrite the LEA tail and call displacement:
cc [8d 64 24 80 e8 d0 d1 d2 d3]
From offset 0 this traps on the uprobe INT3. Bytes 1..9 are not
executable entry points while byte 0 is trapped.
3) Publish the first LEA byte:
[48] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this is:
lea -0x80(%rsp), %rsp
call <uprobe-trampoline>
Unoptimize path (int3_update_unoptimize):
1) Initial optimized state:
48 8d 64 24 80 e8 d0 d1 d2 d3
Same as 3) above.
2) Trap new entries before restoring the NOP bytes:
[cc] 8d 64 24 80 e8 d0 d1 d2 d3
From offset 0 this traps. A thread that had already executed the
LEA can still reach the intact CALL at offset 5.
3) Restore bytes 1..4 of the original NOP while keeping byte 0 trapped
and byte 5 as CALL.
cc [2e 0f 1f 84] e8 d0 d1 d2 d3
From offset 0 this still traps. Offset 5 is still the CALL for any
thread that was already past the first LEA byte.
4) Publish the first byte of the original NOP:
[66] 2e 0f 1f 84 e8 d0 d1 d2 d3
From offset 0 this is the restored 10-byte NOP; the CALL opcode and
displacement are now only NOP operands. Offset 5 still decodes as
CALL for a thread that was already there.
Tthere is only a single target uprobe-trampoline for the given nop10
instruction address, so the CALL instruction will not be changed across
unoptimization/optimization cycles.
Therefore, any task that is preempted at the CALL instruction is guaranteed
to observe that CALL and not anything else.
Note as explained in [2] we need to use following nop10:
PF1 PF2 ESC NOPL MOD SIB DISP32
NOP10: 0x66, 0x2e, 0x0f, 0x1f, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00 -- cs nopw 0x00000000(%rax,%rax,1)
which means we need to allow 0x2e prefix which maps to INAT_PFX_CS
attribute in is_prefix_bad function.
Also changing the uprobe syscall error when called out of uprobe
trampoline to -EPROTO, so we are able to detect the fixed kernel.
The optimized uprobe performance stays the same:
uprobe-nop : 3.129 ± 0.013M/s
uprobe-push : 3.045 ± 0.006M/s
uprobe-ret : 1.095 ± 0.004M/s
--> uprobe-nop10 : 7.170 ± 0.020M/s
uretprobe-nop : 2.143 ± 0.021M/s
uretprobe-push : 2.090 ± 0.000M/s
uretprobe-ret : 0.942 ± 0.000M/s
--> uretprobe-nop10: 3.381 ± 0.003M/s
usdt-nop : 3.245 ± 0.004M/s
--> usdt-nop10 : 7.256 ± 0.023M/s
[1] https://lore.kernel.org/bpf/20260509003146.976844-1-andrii@kernel.org/
[2] https://lore.kernel.org/bpf/20260518104306.GU3102624@noisy.programming.kicks-ass.net/#t |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix UAF from worker threads when domains are removed
The mbm_handle_overflow() and cqm_handle_limbo() workers read event counters
and may sleep while doing so. They are scheduled via delayed_work embedded in
struct rdt_l3_mon_domain. Architecture allocates and frees these domains from
CPU hotplug callbacks under cpus_write_lock(), and the workers acquire
cpus_read_lock() to keep the domain alive across their access.
A use-after-free can occur when a worker is blocked waiting for
cpus_read_lock() while the hotplug core holds cpus_write_lock(): the
architecture frees the rdt_l3_mon_domain that contains the worker's
work_struct. When the worker unblocks, the container_of() it performs on the
embedded work pointer dereferences freed memory.
Drop cpus_read_lock() from the workers and instead drain pending and in-flight
work synchronously before the architecture can free the domain. Since
architecture offlines the domain under cpus_write_lock() after it has been
unlinked from the RCU list and a grace period has elapsed, no new work can be
scheduled. The cancel only needs to wait out existing work. Drop
rdtgroup_mutex during CPU offline around cancel_delayed_work_sync() so that
a worker waiting on the mutex can complete before re-pinning the work on
a different CPU.
When offlining a CPU the architecture may iterate over resources in any order.
For example, the MBA control domain may be offlined before or after
a corresponding L3 monitor domain. Ensure that resctrl fs cancels the workers
no matter what order the architecture offlines the domains. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Serialize multi-part Get/Set Feature transfers
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced. |
| Adobe Commerce is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. An attacker with high privileges could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed. |
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including marking unpaid orders as paid and cancelling completed orders. |
| The Rede Itaú for WooCommerce WordPress plugin before 5.5.3 does not verify the authenticity of a payment gateway webhook before updating an order's status, allowing unauthenticated attackers to change the status of arbitrary WooCommerce orders, including orders that were already paid or completed. |
| The Donation Thermometer WordPress plugin before 2.3.0 does not escape a colour value taken from a shortcode attribute before using it in an attribute of the generated legend markup, allowing users with the Contributor role and above to inject arbitrary event handlers that execute when the page is viewed. |
| The Robokassa payment gateway for Woocommerce WordPress plugin before 1.9.0 does not verify the authenticity of an incoming payment-notification request before acting on the order named in it, allowing unauthenticated attackers to force any WooCommerce order into a failed state. Order identifiers are sequential, so every order in the shop can be taken out of the fulfilment queue one request at a time. |
| The Tainacan WordPress plugin before 1.4.0 does not restrict its reports REST endpoints to users with a management capability, allowing any authenticated subscriber to read the email addresses of the repository's staff. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix return status of RMI log page on allocation failure
nvmet_execute_get_log_page_rmi() leaves 'status' holding NVME_SC_SUCCESS
(set by the successful nvmet_req_find_ns() call) when the kzalloc() for
the log buffer fails. It then jumps to the out label and completes the
request with a success status, so the host is told the command succeeded
while no data was transferred.
Initialize 'status' to NVME_SC_INTERNAL, matching the smart log handler,
so an allocation failure is reported as an internal error. |
| In the Linux kernel, the following vulnerability has been resolved:
md: remove REQ_NOWAIT support from raid1/10/456
REQ_NOWAIT support in md personalities that can block internally is
fundamentally incomplete. While reads can avoid some blocking paths,
write requests can still encounter cases where one mirror succeeds while
another returns -EAGAIN. At that point md cannot distinguish queue
pressure from a real device failure, so it can neither record a bad
block nor safely retry the write without REQ_NOWAIT, leaving mirrors
with divergent data.
Rather than continue advertising REQ_NOWAIT support for personalities
that cannot implement it correctly, remove it from raid1, raid10 and
raid456. Keep REQ_NOWAIT for linear and raid0, which only remap bios to
their underlying devices; stacked limits will still clear the feature if
any component device lacks REQ_NOWAIT support. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx()
When performing channel switches on different radios within a short
timeframe, channel contexts with different bands can be carried for
each struct ieee80211_vif_chanctx_switch.
Rework mt76_switch_vif_chanctx() to properly handle this scenario. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt792x: fix use-after-free in mt76_rx_poll_complete
A use-after-free issue occurs in mt76_rx_poll_complete due to a race
condition. The STA has already been removed, but the rx_status still
had a pointer to the wcid in the STA.
Set the links' wcid pointers to be NULL for a MLD in
mt7925_sta_pre_rcu_remove()
BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xc8
print_report+0x1b8/0x710
kasan_report+0xe0/0x144
do_bad_area+0x120/0x260
do_tag_check_fault+0x20/0x34
do_mem_abort+0x54/0xa8
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x40/0xcc
el1h_64_sync+0x7c/0x80
mt76_rx_poll_complete+0x280/0x470
mt76_dma_rx_poll+0x114/0x51c
mt792x_poll_rx+0x60/0xf8
napi_threaded_poll_loop+0xe0/0x450
napi_threaded_poll+0x80/0x9c
kthread+0x11c/0x158
ret_from_fork+0x10/0x20 |
