| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Espruino 2v29 (commit bffc6d0) contains a NULL pointer dereference vulnerability in jslGetRawString() in src/jslex.c. Crafted raw/binary string input can cause the lexer to pass a NULL iterator target to jsvLockAgain(). In RELEASE/NO_ASSERT builds, the missing assertion guard allows a write through the NULL pointer, resulting in memory corruption and application termination or denial of service. |
| parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with block_ctx->ctx.block_size = block_size before inspecting the return code. init_block_ctx() sets the caller's pointer to NULL and returns -ENOMEM when no entry of the static block1_contexts[] pool is free or timed out, so that store dereferences a NULL pointer.
The pool holds CONFIG_LWM2M_NUM_BLOCK1_CONTEXT entries (default 3) and an entry is only reclaimed once its transfer completes, fails, or ages past 30 seconds. A peer that reaches the client's LwM2M socket can therefore start three block-wise writes on three distinct object paths with the CoAP More bit set and leave them incomplete, then send the first block of a fourth write on a new path to reach the unguarded dereference. Reachability is gated only by the connected UDP socket's source-address filter unless CONFIG_LWM2M_DTLS_SUPPORT is enabled — which has no default — so in a NoSec deployment an on-path or address-spoofing attacker needs no credentials; the same sequence is also reachable from a bootstrap or lower-trust server, and can be hit accidentally by a legitimate server running four concurrent block transfers.
The write targets a fixed low address with a value between 0 and 7, so the consequence is a fatal memory fault (BusFault or corrupted low memory leading to a fault) rather than a usable memory-corruption primitive: the device crashes or resets. Confidentiality and integrity are not affected. The fix moves the store below the guard and validates the context pointer itself instead of the return code, so the context is only touched once it is known to be valid. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.16, the Lua TLS certificate information helper could dereference NULL certificate fields when a Lua script requested certificate information for TLS traffic where some certificate fields were absent. Crafted TLS traffic processed by a deployment using affected Lua TLS scripting could crash Suricata, resulting in denial of service. Version 7.0.16 contains a fix. As a workaround, avoid Lua scripts that call TLS certificate information helpers on untrusted traffic (`TlsGetCertInfo` function), or update scripts to handle missing certificate fields where possible. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, src/datasets-context-json.c assumes that a configured JSON or NDJSON dataset value_key resolves to a string. A trusted or untrusted dataset or rule feed containing a non-string value for that key can cause a NULL pointer dereference during startup, configuration test mode, or rule reload, crashing Suricata before traffic processing. This issue is fixed in version 8.0.6. |
| A flaw has been found in Trusted Domain Project OpenDMARC up to 1.4.2. Affected by this vulnerability is the function opendmarc_spf_ipv6_explode in the library libopendmarc/opendmarc_spf.c of the component SPF Parser. This manipulation of the argument cp causes null pointer dereference. It is possible to initiate the attack remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Trusted Domain Project OpenDMARC up to 1.4.2. This vulnerability affects the function strcasecmp in the library libopendmarc/opendmarc_policy.c. The manipulation results in handling of exceptional conditions. The attack can be executed remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Trusted Domain Project OpenARC up to 1.0.0.Beta1. Impacted is the function arc_parse_canon_t in the library libopenarc/arc-canon.c of the component libopenarc. The manipulation results in null pointer dereference. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.0.0.Beta0 is recommended to address this issue. Upgrading the affected component is advised. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix null pointer dereference in devcoredump cleanup
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: 8250: protect against NULL uart->port.dev in register
serial8250_register_8250_port() conditionally copies uart->port.dev
from up->port.dev only when up->port.dev is non-NULL:
if (up->port.dev) {
uart->port.dev = up->port.dev;
...
}
So if both the existing uart slot and up have a NULL ->dev,
uart->port.dev remains NULL. The very next ACPI companion check
then dereferences it unconditionally:
if (!has_acpi_companion(uart->port.dev)) {
has_acpi_companion() reads dev->fwnode without a NULL guard
(include/linux/acpi.h), so this NULL-derefs the kernel for the
remaining no-dev case rather than just skipping the
mctrl_gpio_init() initialisation as intended.
smatch flags the inconsistency:
drivers/tty/serial/8250/8250_core.c:767
serial8250_register_8250_port() error: 'uart->port.dev' could be
null (see line 719)
Guard the call with a NULL check so register continues to work
for callers that legitimately have no parent device (legacy
non-OF/non-ACPI registrations).
No functional change for callers that pass a non-NULL ->dev. |
| libde265 commit 4d45a6b contains a NULL pointer dereference vulnerability in the NAL parsing path. When de265_push_NAL() is called with a zero-length NAL unit, the resulting NAL_unit may retain a NULL backing buffer, which is subsequently passed as the destination argument to memcpy() in NAL_unit::set_data(). Although the copy length is zero, this violates the nonnull requirement of memcpy() and results in undefined behavior, causing process termination in UBSan-instrumented builds and denial of service. |
| OpenEXR 3.4.14 contains a NULL Pointer Dereference in the C++ attribute parsing path. A specially crafted EXR file containing an unknown-type attribute with dataSize set to zero causes the parser to create an opaque attribute with a NULL packed_data pointer. The OpaqueAttribute constructor passes the NULL pointer to memcpy() without validating the zero-size condition, resulting in undefined behavior and process termination, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings()
syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0].
The stack trace hinted towards a null dereference of rt->fib6_node when
fn->leaf is accessed in __ip6_del_rt_siblings(). With
RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run
concurrently without acquiring the RTNL lock. In ip6_route_del(), the
route lookup happens under rcu_read_lock() without acquiring
table->tb6_lock.
Between ip6_route_del() looking up the route and __ip6_del_rt_siblings()
acquiring table->tb6_lock, another thread can modify the routing table.
For example, when an ECMP route is replaced via RTM_NEWROUTE with
NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets
iter->fib6_node = NULL. A reproducer was found that triggers this [1].
Add a check to ensure rt->fib6_node is non-null before accessing it.
[0]
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056
Call Trace:
<TASK>
ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232
inet6_rtm_delroute+0x5d7/0x6d0 net/ipv6/route.c:5669
rtnetlink_rcv_msg+0x802/0xc00 net/core/rtnetlink.c:7132
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2556
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x7f5/0x990 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1900
sock_sendmsg_nosec+0x13a/0x180 net/socket.c:800
__sock_sendmsg net/socket.c:815 [inline]
____sys_sendmsg+0x565/0x870 net/socket.c:2713
___sys_sendmsg+0x2a5/0x360 net/socket.c:2767
__sys_sendmsg net/socket.c:2799 [inline]
__do_sys_sendmsg net/socket.c:2804 [inline]
__se_sys_sendmsg net/socket.c:2802 [inline]
__x64_sys_sendmsg+0x1b7/0x290 net/socket.c:2802
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
[1] https://gist.github.com/NamanGulati/0766a1159b6ca61928faaf87425ff899 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark sched_process_wait argument as nullable
do_wait() passes wo->wo_pid to the sched_process_wait tracepoint.
kernel_wait4() leaves wo_pid NULL for wait4(-1), and
kernel_waitid_prepare() does likewise for waitid(P_ALL).
btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID |
PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked
dereference. Trusted pointer loads have no fault protection, so a wait for
any child can then cause a NULL pointer dereference in JITed BPF code.
Add sched_process_wait to raw_tp_null_args[] with argument 0 marked
nullable. The verifier rejects an unchecked dereference while preserving
access after the program checks the pointer for NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: harden DFS cache against invalid target hints
Currently, get_tgt_name() returns ERR_PTR(-ENOENT) when ce->tgthint is
NULL, and dfs_cache_noreq_update_tgthint() assumes ce->tgthint is always
valid.
In preparation for clearing ce->tgthint in free_tgts(), harden callers
of get_tgt_name() against ERR_PTR results and harden
dfs_cache_noreq_update_tgthint() against NULL pointer dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Keep refcount_acquire nullable for borrowed RCU kptrs
bpf_refcount_acquire() is fallible for a borrowed reference because the
object may have reached a zero refcount. The verifier therefore keeps
KF_RET_NULL on the return value unless the argument is an owning reference.
An RCU-protected load of a local kptr is marked MEM_ALLOC, but it only
receives NON_OWN_REF when the pointee contains a graph node. A refcounted
object without a graph node consequently looks like an owning reference
even though the loaded register has no acquired reference state. If the
program drops the last real reference while remaining in the RCU critical
section, refcount_inc_not_zero() returns NULL while the verifier treats the
result as non-NULL.
Only classify the argument as owning when it is backed by a verifier-tracked
reference. This retains the non-NULL return for pointers from bpf_obj_new(),
bpf_kptr_xchg(), or an earlier successful acquisition, while requiring a
NULL check for borrowed RCU kptrs.
[ kkd: Rewrote commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pai: Support CPU hotplug for PMU PAI
The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>'
crashes the kernel when CPUs are hotplug added during that run.
Root cause is the missing allocation of per-CPU data structures
for that new CPU. The allocation is dynamic and the first
event that has task context creates such a structure for
each online CPU. This is not sufficient. CPUs may be offline
during event creation and can be set online during the
perf run time. For example commands
# echo 0 > /sys/devices/system/cpu/cpu1/online
# perf stat -e cycles -i -- stress-ng -t10s --matrix X
# sleep 1
# echo 1 > /sys/devices/system/cpu/cpu1/online
Currently without a CPU hotplug handler, that new CPU has no
per-CPU data infrastructure. The scheduler runs PMU call back
function pai_add() to install the PMU support for that CPU before
the task is being scheduled on that new CPU.
In pai_add() instructions
mp = this_cpu_ptr(pai_root[idx].mapptr);
cpump = mp->mapptr;
return a NULL pointer and the result is a kernel panic as variable
cpump is used inside that function.
Add CPU hotplug support for CPU add and delete and create
the necessary per-CPU data infrastructure during CPU hotplug
add processing. Same for CPU hotplug remove.
This is done when the CPU is offline to ensure the data structures
are available when CPU is made online and tasks are scheduled on it.
[hca@linux.ibm.com: fixup error path in pai_init()] |
| InDesign Desktop is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_set_level()
Commit a2cec6863709 ("s390/debug: Add s390dbf kernel parameter")
incorrectly removed a null-id check from debug_set_level(), introducing
a possible NULL pointer dereference for debug-API users that put
debug_register() results unchecked into debug_set_level().
Fix this by moving the check from the internal _debug_set_level()
variant back to the external debug_set_level() wrapper. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: preserve LZMA decoders on resize failure
The pool-resize path frees each stream's old decoder before allocating
its replacement. If an allocation fails after some streams have already
been replaced, the failed stream is put back on the list with state ==
NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole
pool had been resized.
An existing LZMA mount can select the broken stream and pass
NULL to xz_dec_microlzma_reset(). A retry at the same size also
skip another resize attempt. Since the global maximum was advanced,
thus, the invalid state is left unrepaired.
Allocate each replacement before freeing the old decoder, temporarily
retaining one old decoder during allocation. Stop at the first failure
and advance z_erofs_lzma_max_dictsize only after all streams satisfy
the request.
Record each stream's dictionary capacity so retries can skip streams
already enlarged before a partial failure. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del()
A NULL pointer dereference in klist_put() occurs when a child device (such
as a BNEP network device in bnep_session) is concurrently being
unregistered while hci_conn_del_sysfs() reparents child devices.
This is caused by a race condition between hci_conn_del_sysfs() and
concurrent child device unregistration (e.g. bnep_session calling
unregister_netdev()). During device unregistration, device_del() snapshots
a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the
child device using device_find_any_child() and calls device_move() to
reparent it to NULL, which removes the node from its parent's klist and
clears knode_parent. Subsequently, device_del() calls
klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing
klist_put() to dereference knode_klist(n)->put on an already removed node,
resulting in a NULL pointer dereference.
This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix
use-after-free in device_for_each_child()"), which replaced
device_find_child(..., __match_tty) with device_find_any_child() in
hci_conn_del_sysfs(). That change was intended to avoid a use-after-free
where conn->dev outlived its parent hdev->dev when child devices held
references to conn->dev, because conn->dev only held a reference to
hdev->dev while registered in sysfs.
Fix the issue properly by taking an explicit reference to the parent device
with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with
put_device(parent) in bt_link_release() when the conn device is freed. This
ensures that hdev->dev remains valid for the entire lifecycle of conn->dev,
resolving the underlying use-after-free. With the parent reference held
properly, restore the __match_tty filter in hci_conn_del_sysfs() so that
device_move() is only invoked on persistent RFCOMM TTY devices as
originally intended, eliminating the race condition with unregistering
network devices. |
