| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches
emit_render_cache_flush() sets PIPE_CONTROL0_HDC_PIPELINE_FLUSH to
flush the L2/HDC data cache before fence signalling, but it never
requests a flush of the LSC untyped L1 data cache via the 'Untyped
Data-Port Cache Flush Enable' bit in PIPE_CONTROL DWord0[11].
Per the Bspec, in 3D pipeline mode HDC Pipeline Flush is documented to
also flush/invalidate the untyped L1 cache, but only depending on how
HDC_CHICKEN0[13:11] is programmed. Starting with MTL, this coupling
between HDC Pipeline Flush and the untyped L1 cache flush no longer
holds in practice, regardless of how HDC_CHICKEN0 is programmed, so
relying on it is not safe on newer platforms such as BMG. Mesa's Vulkan
driver (anv) has been assuming the kernel flushes both caches between
submissions, and hit user-visible corruption in apps such as Llama.cpp
because of this gap; it now works around it by flushing both caches
again from userspace at the end of every command buffer.
Correctness between submissions on the same queue is userspace's
responsibility and belongs in Mesa, not the kernel. However, for
security we must ensure stale data can't leak through the untyped L1
dataport cache once memory is reclaimed or evicted, which requires the
KMD to flush it before releasing memory for reuse.
Prior to MTL, HDC_CHICKEN0 could be programmed (as already done for
DG2 via Wa_22010960976/Wa_14013347512) to reliably keep HDC Pipeline
Flush coupled to the untyped L1 cache flush, so those platforms are
unaffected. Mesa's own anv driver found that on MTL the HW
disconnected the two independently of how HDC_CHICKEN0 is programmed,
and could not bring the old behavior back even by writing the register
by hand; see Mesa commit 7c2ff46a4fc3 ("anv: don't prevent L1 untyped
cache flush in 3D mode"). The kernel can't reliably request the flush
from the CS on MTL either, so restrict the new PIPE_CONTROL bit to
GRAPHICS_VERx100 >= 2000 (Xe2 and later), where it can be relied on.
Explicitly set PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH together
with PIPE_CONTROL0_HDC_PIPELINE_FLUSH in emit_render_cache_flush() on
Xe2 and later, so the L1 data cache is known clean before memory is
released for reuse, without depending on undocumented
platform-specific HDC_CHICKEN0 behavior.
Bspec: 56551
(cherry picked from commit 434514b6fe731e873808297c268fc52cdf4a1ce6) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: analogix_dp: fix unchecked bound endpoint name length
rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree
path into a 32-byte stack buffer. Device tree paths are not limited to
this size, so a sufficiently long path can overflow the buffer.
Use snprintf() with the destination size to truncate the generated name
and keep the writes within bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/drm_exec: fix up contended obj when num_objects is 0
drm_exec_prepare_array() silently returns success without calling
drm_exec_lock_contended() when num_objects is zero. This breaks the
invariant upheld by drm_exec_lock_obj(), where every entry point into
the locking sequence must first attempt to lock any previously
contended object before proceeding.
Drivers that chain multiple drm_exec_prepare_array() calls per
drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait
ioctls, which prepare separate read and write BO arrays) can pass an
empty array for one of the two calls. If contention is hit while
preparing the non-empty array, exec->contended is set and the loop
retries; on retry, the empty-array call preceding it is a no-op that
never clears exec->contended, so drm_exec_retry_on_contention()
immediately jumps back to the top of the loop without ever reaching
the call that would resolve the contention. This spins forever.
Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended()
directly when num_objects is zero, so a pending contended object dont
loop infinitely. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a user could cause an integer overflow leading to an out-of-bounds write to GPU memory. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usbusx2y: validate URB actual_length in interrupt callback
i_usx2y_in04_int() processes the interrupt URB data without checking
urb->actual_length. A short transfer from a malfunctioning device
would cause the handler to process uninitialized heap data from the
kmalloc-allocated in04_buf, which is then copied to the mmap-accessible
ctl_snapshot[] array.
Fix by using kzalloc() for in04_buf to zero-initialize the buffer,
and adding an actual_length check to skip processing on short
transfers while still resubmitting the URB. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline]
configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185
Unhash in configfs_remove_dir(), while the item is still guaranteed to be
there. A reference obtained just before that stays harmless, as
create_link() rechecks CONFIGFS_USET_DROPPING, already set by
configfs_detach_prep(). Both configfs_unregister_subsystem() paths
d_drop() after detaching, so this only makes rmdir match them. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause improper input validation. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause an improper validation of an array index. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the firmware where an attacker could cause an out-of-bounds read. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix missing scrub of temp buffers with PAES algorithm
In function ctr_paes_do_crypt() there is a buffer used to process
remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and
thus could lead to expose of unwanted data. Rework the code to
explicitly scrub the buffer at the end of the function to avoid
exposure of maybe sensitive data.
In function __xts_2keys_prep_param() change the existing scrub to
clean the whole param block instead of just the key field. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: flowlabel: cap duplicate leases per socket
ipv6_flowlabel_get() allocates an ipv6_fl_socklist entry for every
successful GET. The recheck path for a compatible existing flowlabel
links another lease without applying any lease admission check. Repeated
GET requests for one shareable label can therefore grow a socket's lease
list without bound.
Reject a new unprivileged lease once the socket already holds
FL_MAX_PER_SOCK leases. Check this on the shared recheck path so reuse
of a globally interned label, including the fl_intern() collision path,
is covered as well. New-label admission remains under the existing
mem_check() policy.
Use capable(CAP_NET_ADMIN) rather than ns_capable(), matching
mem_check(). An unprivileged user must not bypass the cap by creating a
user namespace and a netns where they have CAP_NET_ADMIN, which would
still consume host memory.
Check the capability only when the socket reaches the limit, so
successful unprivileged GET requests below the cap do not generate a
capability audit. Do the admission check before updating linger and
expires so a rejected GET does not refresh the shared label, matching
the existing socket-list allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: don't overconsume buffers when using MSG_TRUNC
When a recv/recvmsg is issued with MSG_TRUNC and the incoming packet is
larger than the provided buffer, the net layer returns the full length
of the packet rather than the number of bytes actually copied into the
buffer. As a result, io_uring advances more of the provided buffer ring
than was actually filled. Use the actual filled region size to consume
the buffer, but still return the full size to preserve MSG_TRUNC
semantics.
Take care with multishot, because that seems to already truncate the
consumption based on the available payload size.
This was reported in https://github.com/axboe/liburing/issues/1619.
[axboe: fold in size_t unsigned fix] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: Fix memory leak in query_perf_config_list()
When krealloc() fails, free the original oa_config_ids before returning
to avoid a memory leak.
(cherry picked from commit 9977e9d84f46d4f12ad35fbbc0ec4638554bce87) |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Fix ethosu_job_open() return value
A WARN_ON() returns a 0 or 1, not the original negative errno. Just drop
the WARN_ON() as the FD open will pass the return code to userspace and
there's only one possible source of the error (drm_sched_entity_init()). |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an attacker could cause an out-of-bounds write. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause a null pointer dereference. A successful exploit of this vulnerability might lead to denial of service. |
| The Business Essentials for Contact Form 7 plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'gateway' Form Field in all versions up to, and including, 1.2.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the Payments module to be enabled and a form to be configured to accept both PayPal and Stripe as payment gateways. |
| The Ad Inserter – Ad Manager & AdSense Ads plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 's' Search Parameter in all versions up to, and including, 2.8.18 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires that a site administrator has configured at least one Ad Inserter block using the {title} or {short-title} placeholder with that block enabled for search pages, which is a standard, documented plugin feature. |
| The Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Mark on Map Longitude/Latitude Fields in all versions up to, and including, 1.15.47 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In SettingsLib, there is a possible way to disable system components due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
