Export limit exceeded: 417349 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417349 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80836 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - bound the akcipher result length virtio_crypto_dataq_akcipher_callback() sets the result length from the device-reported response length without bounding it to the destination buffer, which was allocated for the original request length. sg_copy_from_buffer() then reads that many bytes from the destination buffer; a backend reporting a larger length over-reads adjacent kernel heap into the caller's scatterlist (an out-of-bounds read). Clamp the reported length to the originally requested destination length. A conforming device reports no more than that, so valid results are unaffected. | ||||
| CVE-2026-80786 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves. | ||||
| CVE-2026-80771 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: register input device after capabilities are set input_register_device() exposes the device to userspace immediately. In joycon_input_create() it was called before joycon_config_rumble() configures the FF_RUMBLE capability and the memless force-feedback device, so a concurrent EVIOCSFF could dereference a NULL dev->ff. Registering early also means the initial udev event lacks button and axis information, which can make input managers ignore the device. Move input_register_device() to the end of joycon_input_create(), after all capabilities, the IMU input device and the force-feedback callbacks have been configured. | ||||
| CVE-2026-80761 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here. | ||||
| CVE-2026-80755 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: reject a permission value exceeding the class permission count perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, which is already set when perm_read() runs. Well-formed policies are unaffected. [PM: tweak comment for line length] | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80739 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring ESW devcom lock without condition. In addition, in case of peer_flow, __mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock. This results in an AA deadlock. To fix this, introduce a new PEER flag that is set on flows created as peer flows (the duplicate flows on peer devices), and check it in mlx5e_tc_del_flow() before acquiring ESW devcom lock. Lockdep splat: ============================================ WARNING: possible recursive locking detected ============================================ Possible unsafe locking scenario: CPU0 ---- lock(&comp->lock_key#2); lock(&comp->lock_key#2); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_deadlock_bug.cold+0xbd/0xca __lock_acquire+0x1671/0x2ec0 lock_acquire+0x10e/0x2e0 down_read+0x95/0x430 mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core] mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core] mlx5e_flow_put+0x99/0x100 [mlx5_core] __mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core] mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core] mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core] mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core] tc_setup_cb_add+0x1dc/0x470 fl_change+0x2f4d/0x626d [cls_flower] tc_new_tfilter+0x79b/0x2310 rtnetlink_rcv_msg+0x778/0xad0 do_syscall_64+0x70/0x960 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> | ||||
| CVE-2026-80738 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. | ||||
| CVE-2026-80710 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. | ||||
| CVE-2026-80698 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks. | ||||
| CVE-2026-80695 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16(). | ||||
| CVE-2026-80694 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash. | ||||
| CVE-2026-80668 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use conntrack GC to reap expectations This patch replaces the timer API by GC worker approach for expectations, as it already happened in many other subsystems. Use the existing conntrack GC worker to iterate over the local list of expectations in the master conntrack to reap expired expectations. Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct expectation which nevers sets it. Hold the expectation spinlock while iterating over the master conntrack expectation list to synchronize with nf_ct_remove_expectations(). This also performs runtime packet path garbage collection through the expectation insertion and lookup functions while walking over one of the chains of the global expectation hashtables. Unconfirmed conntrack entries are skipped since ct->ext can be reallocated and dying are skipped since those will be gone soon. Set on IPS_HELPER_BIT if the helper ct extension is added, then the new GC worker does not need to bump the ct refcount to check if the ct->ext helper is available. This removes the extra bump on the refcount for expectation timers, this allows to remove several nf_ct_expect_put() calls after the unlink, after this update only refcount remains at 1 while on the expectation hashes. This patch implicitly addresses a race with the existing timer API allowing an expectation to access a stale exp->master pointer which has been already released when expectation removal loses races with an expiring timer, ie. timer_del() reporting false. Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This is needed by nf_conntrack_unexpect_related() which is called in error paths to invalidate newly created expectations that has been added into the hashes. These expectactions cannot be inmediately released as GC or nf_ct_remove_expectations() could race to make it. On expectation insert, the runtime GC reaps stale expectations before checking the expectation limit set by policy. Set current timestamp in nf_ct_expect_alloc(), then add the expectation policy timeout (or custom timeout specified added on top of this) to specify the expectation lifetime. | ||||
| CVE-2026-80654 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Shutdown and free rx mailbox channel A mbox rx channel is requested using mbox_request_channel_byname() in probe. In remove callback, the rx mailbox channel is cleaned up when the rx_chan is NULL due to incorrect condition check. The mailbox channel is not shutdown and it can receive messages even after the device removal. This leads to use after free. Also the channel resources are not freed. Fix this by checking the rx_chan correctly. | ||||
| CVE-2026-80653 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]--- During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influences __device_links_no_driver() before driver rmmod and caused WARNING. Add the slave_destroy interface to make sure link is removed after flush workque. | ||||
| CVE-2026-80650 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization. | ||||
| CVE-2026-80643 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices. | ||||
| CVE-2026-80637 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: synproxy: fix unaligned memory access in timestamp adjustment Use get_unaligned_be32() and put_unaligned_be32() to safely read and write the timestamp fields. This prevents performance degradation due to unaligned memory access or even a crash on strict alignment architectures. This follows the implementation of timestamp parsing in the networking stack at tcp_parse_options() and synproxy_parse_options(). | ||||
| CVE-2026-80634 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the decrement still happens and wraps it to 255. The break only leaves the inner switch -- a later path entry can set info->indev back to a real device, and we end up returning with num_encaps == 255. nft_dev_forward_path() then walks info.encap[] (size 2) up to num_encaps, which means an OOB stack read and a bogus count copied into the route descriptor. Should only happen on a malformed bridge path stack, hence the WARN, but worth handling sanely. Move the decrement out of the WARN. [ While at this, remove the WARN_ON_ONCE since this can only happen with a buggy bridge path stack --pablo ]. | ||||
| CVE-2026-80631 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject compressed segment that overflows the compressed input lzo_decompress_bio() validates each on-disk segment length seg_len only against the workspace cbuf size, not against the compressed input size (compressed_len, the total folio bytes of the bio). A crafted extent can carry a segment whose seg_len passes the cbuf check but runs past the end of the bio, so copy_compressed_segment() walks off the last folio: get_current_folio() then returns the NULL folio from bio_next_folio(), and with CONFIG_BTRFS_ASSERT disabled (default) folio_size(NULL) faults. BUG: KASAN: null-ptr-deref in lzo_decompress_bio (fs/btrfs/lzo.c:383) Read of size 8 at addr 0000000000000000 by task kworker/u8:1/29 Workqueue: btrfs-endio simple_end_io_work kasan_report (mm/kasan/report.c:590) lzo_decompress_bio (fs/btrfs/lzo.c:383) end_bbio_compressed_read (fs/btrfs/compression.c:1065) btrfs_bio_end_io (fs/btrfs/bio.c:135) btrfs_check_read_bio (fs/btrfs/bio.c:180 fs/btrfs/bio.c:285) simple_end_io_work process_one_work worker_thread Reject any segment whose payload would extend beyond compressed_len before copying it, treating it as corruption like the other on-disk validation failures in this function. | ||||