| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: OpenSSL QUIC stack does not enforce connection
level flow control for streams. Remote peers may send more bytes
as long as they fit within the stream flow control limits.
Impact summary: A malicious remote peer may exploit the lack of connection
flow control for streams to make the QUIC stack receive ~100MB of memory
instead of 768 KiB (default flow control window size).
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: The local QUIC stack advertises two flow control limits
to its remote peer: stream flow control limit and connection flow
control limit. The remote peer must follow both limits when transmitting
stream data.
Whenever the local QUIC stack receives a stream frame, it validates
that the size of the received stream frame stays within flow control limits.
If either limit is exceeded (stream level or connection level), then
the QUIC stack must close the connection with a flow control error.
The vulnerable OpenSSL QUIC stack enforces the stream-level but not
the connection-level limit. To exploit the issue, three conditions must be met:
- the remote peer opens several streams
- each stream must stay within the stream-level flow control limit
- there must be no zero-offset byte sent on any of the streams
(to prevent the vulnerable QUIC stack from consuming data).
By meeting the conditions above, the remote peer may make the local stack
allocate 2 x MAX_STREAMS x (stream flow control limit) bytes
of memory. MAX_STREAMS defaults to 100, and the limit applies to both
bidirectional and unidirectional streams, making it 200 in total. The default
flow control window for a stream is 512kB. The remote peer may
force the vulnerable QUIC stack to allocate 100MB of heap per connection.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for zero range
When FALLOC_FL_ZERO_RANGE is used without FALLOC_FL_KEEP_SIZE,
smb3_zero_range() may extend EOF without checking RLIMIT_FSIZE, allowing
the file to grow beyond the caller's file-size limit.
Fix this by calling inode_newsize_ok() before sending the zero-range
request when the operation would extend EOF.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072
truncate -s 2M "$FILE"
fallocate --zero-range -o 0 -l 4M "$FILE"
echo "fallocate rc=$?"
stat -c "file size=%s" "$FILE"
'
Before this change, the operation succeeds despite the 3 MiB limit:
fallocate rc=0
file size=4194304
After this change, fallocate fails and leaves the file at 2 MiB. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.15, 4.0.20, 4.1.11, and 4.2.6, the Web STOMP WebSocket handler enforced neither max_frame_size nor login_timeout before authentication, allowing an unauthenticated client to keep a connection alive with a slow stream of small frames and accumulate unbounded pre-authentication state. The rabbitmq_web_stomp plugin must be enabled, and no authentication is required to reach the vulnerable path. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| A user account with permission to deploy artifacts to a hosted Maven repository could upload a POM file containing an oversized metadata field. This causes future attempts to list or browse that repository's components to permanently fail until an administrator repairs the underlying data. Only the targeted repository is affected; other repositories and overall server health remain unaffected. |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead denial of service via Excessive Allocation (CAPEC-130) |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead to denial of service via Excessive Allocation (CAPEC-130). |
| Uncontrolled Resource Consumption (CWE-400) in Elasticsearch can lead to denial of service via Excessive Allocation (CAPEC-130). |
| urllib3 is an HTTP client library for Python. From 1.10.3 until 2.8.0, the HTTPResponse.read_chunked and HTTPResponse.stream methods can allocate unbounded memory because the streaming chunk parser buffers the chunk-size field until newline or EOF without a length bound. The trigger is that a malicious server returns Transfer-Encoding: chunked followed by a very long run of bytes without a newline. The attack mechanism is that a malicious HTTP server sends a very long unterminated chunk-size line. The impact is that unbounded memory allocation can exhaust the client process. This issue is fixed in version 2.8.0. |
| A pre-authentication attacker could leverage type nesting to cause a StackOverflowError potentially leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.1.0.
Users are recommended to upgrade to version 10.1.1, which fixes the issue. |
| The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.19, 2.1.5, 3.0.7, and 5.0.10, crafted brace patterns can exhaust the native stack in parseCommaParts because parseCommaParts recursively processes the remainder once per brace group and uses push.apply to pass every element of a very large comma-part array as a function argument. Patterns containing many comma-separated brace groups trigger the recursive path, while the large array triggers the argument-array path without deep recursion. These paths cause recursive and argument-array native stack exhaustion before max or maxLength can limit output, potentially terminating the Node.js process in a process-terminating denial of service. This issue is fixed in versions 1.1.19, 2.1.5, 3.0.7, and 5.0.10. |
| vLLM up to and including 0.17.0 allows remote attackers to cause a Denial of Service via memory exhaustion. The AsyncMediaIO.fetch_audio and AsyncMediaIO.fetch_image functions in multimodal/inputs.py fetch user-supplied media URLs using aiohttp and call r.read() without enforcing a maximum response size, allowing an attacker to exhaust server memory by providing a URL to an arbitrarily large file. |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 7.0.0 until 7.0.17 and 8.0.6, the MQTT parser in rust/src/mqtt/mqtt.rs permits repeated PUBREC or PUBREL messages to be appended to one transaction without a limit. Crafted MQTT traffic can grow transaction state indefinitely, consuming CPU and memory and causing slowdown or denial of service. This issue is fixed in versions 8.0.6 and 7.0.17. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a malicious HTTP/2 server to exhaust memory on the client host and cause a denial of service.
Mint.HTTP2 enforces the client's max_header_list_size setting only on the compressed size of an inbound header block, while RFC 9113 section 6.5.2 defines the limit on the decoded header list. An HPACK indexed field costs one byte on the wire and decodes to a dynamic table entry of up to 4 KB, and join_cookie_headers/1 in lib/mint/http2.ex copies every cookie value of a response into one new binary. A header block under the default 256 KB wire limit therefore makes the client allocate about 1 GB for a single response, and several such responses in one delivery exhaust the memory of the process that owns the connection or of the whole VM.
This issue affects mint: from 1.1.0 before 1.10.2. |
| authentik is an open-source identity provider. Prior to 2026.2.7, 2026.5.7, and 2026.8.2, an unauthenticated attacker can submit a malformed SAML message to an authentik deployment using SAML in either the identity-provider or SAML source role. The message can stop the worker handling /application/saml/* or /source/saml/*, causing the requests assigned to that worker to fail. Worker process termination and automatic restart do not destroy database-backed sessions, but continued malicious messages can cause a sustained share of legitimate traffic to fail. Other protocol implementations are not affected. This issue is fixed in versions 2026.2.7, 2026.5.7, and 2026.8.2. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Prior to 1.7.20, the default-open GET /subscribe endpoint in network/api/websocket/routes.go accepts unauthenticated WebSocket clients with permissive origin handling, does not call SetReadLimit to bound message size, and has no live-connection cap. SocketHub.HandleClientInsertion also accepts an unbounded address list that grows addressSubscription, and client.loopIn continues reading without a size limit, allowing one client to grow subscription maps or many clients to retain goroutines, buffered channels, and descriptors. The global HTTP request throttler does not count upgraded live WebSocket connections. Because the REST and WebSocket API runs in the node process, memory or scheduler exhaustion can crash the node and interrupt P2P and consensus participation. This issue is fixed in version 1.7.20. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, The runtime-parameters lookup path coerces the URL :component segment to an atom with rabbit_data_coercion:to_atom/1 in lookup_component/1 (deps/rabbit/src/rabbit_runtime_parameters.erl), creating a new atom for any previously unseen value. A safe helper, rabbit_registry:binary_to_type/1, which uses binary_to_existing_atom with a catch, already exists but is not used at this call site. lookup_component/1 calls rabbit_data_coercion:to_atom(Component) on the :component segment of the request URL, converting an attacker-supplied string into a new atom. Because the Erlang atom table is bounded and atoms are never garbage collected, an authorized policymaker issuing roughly one million requests with distinct component values can exhaust the atom table and crash the node, resulting in a denial of service. Preconditions include Exploitation requires policymaker privileges and roughly one million requests.. This issue is fixed in versions 4.2.7 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6, parse_array_primitive/2 for constructor 0x45 (list0) returns an element with byte-width B = 0. The enclosing array32 parser at line 148 reads a 4-byte Count from the wire and loops Count times consuming B bytes each , with B = 0, no input is consumed and the loop builds a list of Count empty elements bounded only by the 32-bit field. The SASL-mechanisms / SASL-init frame is parsed by amqp10_framing:decode_bin/1 from rabbit_amqp_reader.erl:412 before authentication completes. The pre-auth incoming_max_frame_size (default 8192 bytes) caps the frame, not the Count field, so a 19-byte payload with Count = 0xFFFFFFFF is accepted. No max_heap_size is set on the reader process. An unauthenticated network attacker can crash any RabbitMQ node that has the AMQP 1.0 listener enabled (default port 5672) by sending a single ~19-byte frame. The reader process attempts to build a list of ~4 billion empty elements, exhausting heap memory and terminating the Erlang VM. All tenants and protocols on the node lose service. Preconditions include Network reachability to the AMQP listener (port 5672, enabled by default) No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, and 4.2.6. |
