| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| tftp-hpa 5.4 before 6.0 contains an out-of-bounds read vulnerability in rewrite_string() in tftpd/remap.c that walks heap memory during jump label searches. Unauthenticated remote attackers can send read or write requests whose filename matches a remap jump rule to crash the forked in.tftpd request handler. |
| A security vulnerability has been detected in getformwork formwork up to 2.3.12. Impacted is the function DomSanitizer::sanitizeNodeAttribute of the file formwork/src/Sanitizer/DomSanitizer.php of the component URI Sanitizer. Such manipulation of the argument formaction leads to cross site scripting. The attack may be launched remotely. Upgrading to version 2.3.13 is recommended to address this issue. The name of the patch is 729701e59c5886685c5a1d477bdc3035e41f18b1. Upgrading the affected component is advised. |
| A vulnerability was found in Kusalkasilva Learning-Management-System up to ffeb873f8803f1e9664384ff75000c7da45466d2. The affected element is the function mysql_query of the file admin/login.php of the component Administrator Login Endpoint. The manipulation of the argument username/password results in sql injection. The attack can be launched remotely. The exploit has been made public and could be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| Payload is a free and open source headless content management system. In @payloadcms/plugin-multi-tenant versions before 3.90.0 and canary versions before 4.0.0-canary.34, an authenticated user limited to one tenant can create a record in another tenant when at least one tenant-enabled collection exists. Reads and direct edits of existing documents in the target tenant are not bypassed. This issue is fixed in versions 3.90.0 and 4.0.0-canary.34. |
| libmikmod before 3.3.14 contains a heap out-of-bounds read vulnerability in the Impulse Tracker loader load_it.c that allows attackers to read adjacent heap memory via oversized patterns. Attackers can supply a crafted IT module with more than 200 pattern rows, causing IT_ConvertTrack() to read past the itpat buffer and crash applications. |
| Kiota is an OpenAPI based HTTP Client code generator. From 1.25.1 until 1.35.0, Kiota copies x-ai-capabilities.response_semantics.oauth_card_path from an attacker-controlled or compromised OpenAPI description into a generated API plugin manifest without validating that the value is a safe package-relative file reference. Parent-directory traversal, rooted paths, or absolute URIs can therefore reach a consuming host that resolves the reference, allowing the host to cross the intended plugin-package boundary or use an unintended authentication card. Kiota does not itself read a local file or execute code merely while generating the manifest, and impact requires downstream resolution of the unsafe reference. This issue is fixed in version 1.35.0. |
| vLLM is an inference and serving engine for large language models. Prior to 0.30.0, flash late-interaction scoring at the /score and /rerank endpoints derives each worker's query_key value from the caller-controlled X-Request-Id header. A concurrent request that reuses a victim's identifier can overwrite the cached query embedding so the victim's documents are scored against the attacker's query, and shared use counters can also cause a late-interaction cache-miss error. This issue is fixed in version 0.30.0. |
| A flaw has been found in O2OA up to 10.0.1-ce. This affects the function ActionUploadExcelWithUrl of the file /x_general_assemble_control/jaxrs/excel/upload/with/url of the component General Module. Executing a manipulation of the argument fileUrl can lead to server-side request forgery. The attack can be launched remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in Lybbn Django-Vue-Lyadmin up to 3.2.12. The impacted element is an unknown function of the file backend/application/settings.py of the component JWT Signing. The manipulation of the argument SECRET_KEY leads to use of hard-coded cryptographic key
. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The project maintainer explains: "The issue with this key is described in the documentation. Developers need to manually change their keys before deployment." |
| Papermerge 3.5.3 allows remote code execution by a standard user via directory traversal in a /api/documents/upload call. A Python .pth file can be written to site-packages, and its code is executed upon the next start of the Python interpreter. |
| Dell Container Storage Modules (CSM), versions prior to 1.18.0, contains a Missing Authentication for Critical Function vulnerability in the csm-authorization-tenant gRPC service (TenantService). An unauthenticated adjacent network attacker could potentially exploit this vulnerability, leading to unauthorized creation of tenant entities, cross-tenant role injection, and modification of storage access control flags. |
| Joomla Extension - balbooa.com - Unauthorized Deletion of Attachments in Balbooa Forms < 2.4.3.4 - The public removeTmpAttachment action accepts an integer attachment ID and deletes the matching database row and file. The controller verifies a Joomla session token, but the model does not bind that ID to the session that uploaded the file, the current user, the form, the upload field, or the temporary state. Any guest can obtain a token for their own session, so the token prevents CSRF but does not authorize the target object. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kprobes: Fix crash when probing CS CALL instructions
When using eBPF to probe CS CALL instructions within a function,
a crash can be triggered.
The eBPF tool probes offset 257 of the __hrtimer_run_queues()
function:
<__hrtimer_run_queues+249>: nopl 0x0(%rax,%rax,1)
<__hrtimer_run_queues+254>: mov %r14,%rdi
<__hrtimer_run_queues+257>: cs call <__x86_indirect_thunk_r12>
<__hrtimer_run_queues+263>: mov %eax,%r12d
<__hrtimer_run_queues+266>: xchg %ax,%ax
<__hrtimer_run_queues+268>: mov %r13,%rdi
Which triggers this crash:
BUG: unable to handle page fault for address: 00000000000f41c9
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: P
RIP: 0010:__hrtimer_run_queues+0x106/0x230
Note that __hrtimer_run_queues+0x106 is __hrtimer_run_queues+262, which is
at the 6th byte of the above CS CALL instruction. Since the CS CALL
instruction occupies 6 bytes, the exception occurred in the middle of that
call instruction.
The root cause is that when using eBPF tools to probe in the middle of a
function, a kprobe with INT3 is used as the underlying implementation.
During single-step emulation of the original CALL instruction,
int3_emulate_call() assumes that the probed CALL instruction is 5 bytes
long. However, the actual CS-prefixed CALL instruction occupies 6 bytes,
so it constructs an incorrect exception return address. When the CPU
returns from the kprobe handler, the next instruction to be executed is at
the address of the last byte of that CS CALL instruction. Coincidentally,
starting from that address, the CPU fetches and decodes a completely
different instruction, which ultimately triggers a kernel crash.
Fix the issue by using the actual instruction length obtained from
the instruction decoder when constructing the exception return
address, rather than relying on the hardcoded CALL_INSN_SIZE macro.
[ mingo: Refined the changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
net: remove WARN_ON_ONCE() from the dev_fill_forward_path() loop check
ipip_fill_forward_path() and ip6_tnl_fill_forward_path() look up the
route to the tunnel's remote endpoint and set ctx->dev to its device,
which is the tunnel itself when that route resolves back to the tunnel.
dev_fill_forward_path() then makes no progress and trips
WARN_ON_ONCE(last_dev == ctx->dev) as soon as a flowtable tries to
offload a flow through the tunnel. That routing loop is a configuration
any CAP_NET_ADMIN user can set up, and ip_tunnel_xmit() and
ip6_tnl_xmit() already treat it as a tx error, so remove the warning and
just fail the walk, as commit 008e7a7c293b ("net: remove WARN_ON_ONCE
when accessing forward path array") did for the path stack overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: Do not write to the serial port after it is closed
hci_uart_close() closes the serdev port if HCI_QUIRK_NON_PERSISTENT_SETUP
is set (for example, for the WCN399x family). A failed hci_dev_open_sync()
following a successful qca_setup() calls hdev->close() but not
hdev->shutdown(), so the port is closed while power->vregs_on is left true.
qca_serdev_remove() then passes its power->vregs_on test and calls
qca_power_off(), which writes to the closed port unconditionally.
Seen on a WCN3988 by unbinding the driver after a controller failure. The
trace below is from a 7.0.0 based kernel, where qca_power_off() was still
named qca_power_shutdown():
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000038
Call trace:
tty_set_termios+0x50/0x238 (P)
ttyport_set_baudrate+0x84/0xc0
serdev_device_set_baudrate+0x24/0x40
qca_power_shutdown+0x158/0x1fc [hci_uart]
qca_serdev_remove+0x54/0x68 [hci_uart]
serdev_drv_remove+0x1c/0x2c
device_remove+0x4c/0x80
device_release_driver_internal+0x1cc/0x224
device_driver_detach+0x18/0x24
unbind_store+0xb4/0xc0
Check HCI_UART_PROTO_READY, which hci_uart_close() clears in the same place
it closes the port, before writing to it. The regulator disable is left
unconditional so the controller is still powered down.
The dangling serport->tty that turns this into a use-after-free is
addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: mmp_pdma: fix wrong sg length in mmp_pdma_prep_slave_sg()
In mmp_pdma_prep_slave_sg(), for_each_sg() iterates the scatterlist
putting each entry into 'sg', but the entry length is read from 'sgl'
(the list head) instead of 'sg' (the current entry):
for_each_sg(sgl, sg, sg_len, i) {
addr = sg_dma_address(sg);
avail = sg_dma_len(sgl); /* should be 'sg' */
Consequently 'avail' is always the length of the first entry. For
multi-sg lists this causes out-of-bounds reads when a later entry is
shorter than the first, and silent data loss when it is longer.
Single-sg or uniformly-sized lists happen to mask the issue. |
| Mattermost versions 11.9.x <= 11.9.0, 11.8.x <= 11.8.4, 11.7.x <= 11.7.7, 10.11.x <= 10.11.22 fail to validate that a property field belongs to the specified run before updating its value which allows an authenticated user with run property-management access to crash the Playbooks plugin via a REST request referencing a property field that belongs to a different run. Mattermost Advisory ID: MMSA-2026-00684 |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: restore the hardware filters on open
bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops
every rule off the list, and bcmgenet_open() calls it on each ifup. Every
rule the user configured is silently lost:
# ethtool -N eth0 flow-type ether dst $MAC action 0
Added rule with ID 0
# ethtool -n eth0 | grep -c Filter:
1
# ip link set eth0 down && ip link set eth0 up
# ethtool -n eth0 | grep -c Filter:
0
Initialise the lists once at probe and restore the rules on open, as
bcmgenet_resume() already does. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Use managed KMS polling to fix UAF on unbind
vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides
no matching drm_kms_helper_poll_fini(). The output poll work stays
scheduled after unbind and runs on the freed drm_device:
# modprobe vc4; rmmod vc4; sleep 10
BUG: KASAN: slab-use-after-free in delayed_work_timer_fn
BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm]
Workqueue: events output_poll_execute [drm_kms_helper]
Allocated by task 171: __devm_drm_dev_alloc
Freed by task 262 (rmmod): drm_dev_put / component_del
Use drmm_kms_helper_poll_init() so polling is finalized with the device,
as other drivers do. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: fix OOB write from device-reported iso length
usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as
(actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where
actual_length is the unsigned length the device reported for the matching
IN packet. A packet completed with status 0 and actual_length < 4 wraps
the subtraction to 0x7fffffec; a zero-length isochronous packet is legal
on the bus, and the preceding loop rejects only non-zero status. The sum
reaches memset() on out_urb->buffer, a 4832-byte object from
kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB).
Even without the wrap the result is out of bounds: at 88.2/96 kHz the
4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight
packets span 5024 bytes of that buffer. usb_submit_urb() rejects an
over-long descriptor only after the memset() and the
usb6fire_pcm_playback() copy of user PCM data have run.
Guard the subtraction as the sibling usb6fire_pcm_capture() already does,
and limit the frame count to what fits in rt->out_packet_size, the OUT
endpoint's wMaxPacketSize. This bounds total_length by the buffer size
while keeping each packet length aligned to a whole output frame.
BUG: KASAN: out-of-bounds in usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338)
Write of size 18446744073709551456 at addr ffff88802a3d0000 by task vhci_rx/5018
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
__asan_memset (mm/kasan/shadow.c:84)
usb6fire_pcm_in_urb_handler (sound/usb/6fire/pcm.c:338)
__usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1657)
usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1741)
vhci_rx_loop (drivers/usb/usbip/vhci_rx.c:107 drivers/usb/usbip/vhci_rx.c:242)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 10:
__kmalloc_cache_noprof (mm/slub.c:5563)
usb6fire_pcm_init (sound/usb/6fire/pcm.c:560 sound/usb/6fire/pcm.c:595)
usb6fire_chip_probe (sound/usb/6fire/chip.c:133)
usb_probe_interface (drivers/usb/core/driver.c:399)
The buggy address belongs to the object at ffff88802a3d0000
which belongs to the cache kmalloc-8k of size 8192
The buggy address is located 0 bytes inside of
4832-byte region [ffff88802a3d0000, ffff88802a3d12e0)
Kernel panic - not syncing: Fatal exception in interrupt |
