| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Incorrect Authorization vulnerability in ash-project ash returns records that a runtime read policy denies to any actor.
When a resource has an access_type :runtime read policy (a check evaluated per record rather than compiled to a filter), Ash.Policy.Authorizer decides each record in check_result/1 (lib/ash/policy/authorizer/authorizer.ex) by discarding impossible policy scenarios and inspecting what remains. When every scenario for a record was impossible, meaning no policy can authorize it and it must be forbidden, the empty-scenario branch instead kept the record ({[record | data], authorizer, any_forbidden?}) and returned it as authorized. As a result, records the runtime read policy denies are returned to any actor. The fix forbids a record whose scenarios are all impossible.
This issue affects ash: from 3.4.44 before 3.32.2. |
| Inefficient Algorithmic Complexity vulnerability in elixir-mint mint allows a remote HTTP server to exhaust CPU on the client host and cause a denial of service.
parse_hex_prefix/2 in lib/mint/http1/parse.ex folds each hex digit of a chunked response's chunk-size field into an arbitrary-precision accumulator with acc * 16 + digit and imposes no limit on the digit count. Because the accumulator grows without bound, the multiplication is not constant time and one pass over N digits costs O(N squared). handle_data/2 prepends conn.buffer and re-parses from the start on every socket message, so a server that dribbles the digits out in small packets makes the client pay that cost repeatedly. A run of roughly 512,000 hex digits costs over ten seconds of CPU in a single pass, measured on stock defaults. The parser reaches this state after a valid status line and a complete, valid header section, so an intermediary inspecting only headers sees an ordinary 200 response.
This issue affects mint: from 1.9.3 before 1.10.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a remote HTTP server to exhaust memory on the client host and cause a denial of service.
Two HTTP/1 response-parser states accumulate server data without any cap. In lib/mint/http1.ex, decode_status_line/4 stores the unconsumed data in conn.buffer when the status line is incomplete, and decode_body/5 does the same for an unterminated chunk-extension line. Both wait for a CRLF the server never has to send, and conn.buffer is prepended to every subsequent socket message. The :max_header_list_size budget is wired only into decode_headers/5 and decode_trailer_headers/4, so neither of these states is covered by it. A malicious server, or one reached through an attacker-controlled redirect or a fetched URL, streams bytes indefinitely until the BEAM node is killed by the operating system out-of-memory handler. The chunk-extension variant is reached after a valid status line and a complete, valid header section, so an intermediary inspecting only headers sees an ordinary 200 response.
This issue affects mint: from 0.1.0 before 1.10.0. |
| Improper Validation of Specified Quantity in Input vulnerability in ash-project ash allows an attacker to store a value of arbitrary size in an attribute whose length constraint should bound it.
Ash measures string length with Elixir's String.length/1, which counts Unicode graphemes, in the max_length and min_length constraints of Ash.Type.String (apply_constraints/2 in lib/ash/type/string.ex), in Ash.Resource.Validation.StringLength, and in the string_length expression function. A grapheme carries an unbounded number of combining marks, so a base character followed by a million combining acute accents is one grapheme and megabytes of data, and satisfies max_length: 2. Where the data layer imposes no independent limit (ETS, Mnesia, or a Postgres text column) the whole value is persisted, so an attacker can write an entire request body into an attribute declared with a small maximum and grow storage without bound.
The counting unit also disagrees with the storage layer, which counts codepoints rather than graphemes, so a value accepted by the constraint can still be rejected or truncated by the column. A Postgres varchar(n) column bounds the value itself and is not exposed.
This issue affects ash: from 0.10.0 before 3.33.0. |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per sponsored payment by a large multiplier and to have the sponsor pay for provisioning an access key on the client's own account.
When the server sponsors Tempo payments, MPP.Methods.Tempo.FeePayerPolicy.measure/3 in lib/mpp/methods/tempo/fee_payer_policy.ex bounds the gas fields, the fee budget, the validity window and the access list of the client-signed 0x76 envelope, but does not check whether the envelope carries the optional key_authorization field. A client can attach a fully signed key authorization, provisioning a new access key with token spending limits on its own account, alongside the normal payment call. The key and each limit entry are persistent storage writes billed as intrinsic gas to the sponsor, bounded only by the gas_limit ceiling. At the reporter's default of one key with three token limits the sponsored cost rises from about 46,587 gas to about 1,808,700 gas, and the client keeps a valid access key it paid nothing for.
This issue affects mpp: from 0.2.0 before 0.16.1. |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows an unauthenticated remote client to inflate the fee-payer's gas cost per sponsored payment by a large multiplier and to have the sponsor pay for EIP-7702 account delegations of the client's choosing.
When the server sponsors Tempo payments, MPP.Methods.Tempo.FeePayerPolicy.measure/3 in lib/mpp/methods/tempo/fee_payer_policy.ex bounds the gas fields, the fee budget, the validity window and the access list of the client-signed 0x76 envelope, but never reads its aa_authorization_list field. Every signed delegation in that list is charged as intrinsic gas before the payment call runs, so a client attaching delegations from throwaway authority keys makes the sponsor pay for them within the default gas_limit ceiling. At the reporter's default of seven entries the sponsored cost rises from about 46,575 gas to about 1,884,087 gas. Because each entry is applied as a persistent set-code delegation, a client can also upgrade its own accounts to delegated code at the sponsor's expense.
This issue affects mpp: from 0.2.0 before 0.16.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in ash-project ash_authentication_oauth2_server allows an unauthenticated attacker to exhaust database storage and memory.
The /authorize endpoint is unauthenticated by design. With Client ID Metadata Documents enabled, resolve_client/3 in AshAuthentication.Oauth2Server.CIMD fetches the document for each new URL-shaped client_id and upserts a client row, with no cap on the number of rows, no expiry or garbage collection, and no length bound on the fetched fields; the document was also placed in CIMD.Cache before validation, so even rejected documents held cache memory until their TTL. An attacker serving valid documents at many distinct URLs creates one permanent client row per URL, each able to carry multi-megabyte strings, growing storage and memory without bound.
This issue affects ash_authentication_oauth2_server: from 0.3.0 before 0.3.1. |
| Improper Protection of Alternate Path vulnerability in ash-project ash_authentication_oauth2_server exposes the state-changing OAuth endpoints under an unintended URL prefix, bypassing controls scoped to the canonical prefix.
oauth2_server_protocol_routes/1 in AshAuthentication.Phoenix.Oauth2Server.Router forwards the same ProtocolRouter at both the /oauth prefix and the /.well-known prefix. Phoenix forward strips the matched prefix before dispatch, so the full route table answers under both mounts, and POST /register, POST /token, and POST /revoke are reachable as /.well-known/register, /.well-known/token, and /.well-known/revoke. Edge controls such as WAF rules, rate limits, or authentication exemptions written against the /oauth paths, or that allow-list /.well-known as unauthenticated, do not apply to the alias.
This issue affects ash_authentication_oauth2_server: from 0.1.0 before 0.3.1. |
| Use of Cache Containing Sensitive Information vulnerability in ash-project ash_authentication_oauth2_server allows a shared HTTP cache to serve one tenant's OAuth discovery metadata to another tenant's clients.
The RFC 8414 and RFC 9728 metadata endpoints in AshAuthentication.Phoenix.Oauth2Server.ProtocolRouter return tenant-specific values (issuer, authorization_endpoint, token_endpoint, jwks_uri) when a tenant is set, but sent them with Cache-Control: public, max-age=3600 and no Vary. When the tenant is derived from something other than the URL (a header or the Host) and a shared cache sits in front, the cache key is the URL alone, so a stored response for one tenant is served to another for up to an hour. Affected clients may then send authorization codes and secrets to the wrong tenant's token endpoint and validate tokens against the wrong keys.
This issue affects ash_authentication_oauth2_server: from 0.1.3 before 0.3.1. |
| Improper Encoding or Escaping of Output vulnerability in ash-project ash_authentication_oauth2_server allows an unauthenticated attacker to inject arbitrary authentication parameters into the WWW-Authenticate challenge header.
BearerPlug and RequireScopePlug built the Bearer resource_metadata="..." challenge by interpolating a resource_metadata URL derived from the request tenant directly into the quoted value. In a multi-tenant application that sets the Ash tenant from request-controlled data (a subdomain, the Host, a path segment, or a header), a tenant containing a " closes the quoted value and appends attacker-chosen auth-params, including a second resource_metadata URL pointing at an attacker-controlled authorization server that spec-following clients follow. Carriage returns and line feeds are rejected by Plug, so this is parameter injection within one header, not response splitting.
This issue affects ash_authentication_oauth2_server: from 0.1.3 before 0.3.1. |
| Server-Side Request Forgery (SSRF) vulnerability in ash-project ash_authentication_oauth2_server allows an attacker who controls a client metadata URL and its DNS to make the server connect to internal or loopback addresses.
public_ip?/1 in AshAuthentication.Oauth2Server.CIMD.ReqFetcher enforces the outbound policy for CIMD metadata fetches. It classified several address forms as publicly routable that are not: IPv4-compatible ::/96 (for example ::127.0.0.1), SIIT IPv4-translated ::ffff:0:0:0/96, and deprecated site-local fec0::/10. A returned AAAA record in one of these ranges passed the policy, so a fetch pinned to that address reached space the policy was meant to block.
This issue affects ash_authentication_oauth2_server: from 0.3.0 before 0.3.1. |
| Improper Authentication vulnerability in ash-project ash_authentication_oauth2_server allows an unauthenticated attacker to register OAuth clients even when Dynamic Client Registration is gated by an initial access token.
resolve_secret/3 in AshAuthentication.Oauth2Server (reached through __resolve_secret__!) treated any return other than {:ok, _} or :error from a configured {module, function, args} or 2-arity-function secret provider as a valid secret, wrapping nil, false, or "" as {:ok, value}. When the initial_access_token resolves to such an empty value, POST /oauth/register compares the presented bearer token against it and the comparison passes with no token supplied, so registration is open although it was configured closed. The same fail-open affected other resolved secrets such as signing_secret.
This issue affects ash_authentication_oauth2_server: from 0.1.0 before 0.3.1. |
| Improper Handling of Alternate Encoding vulnerability in ash-project ash_double_entry allows an attacker to submit several distinct string spellings of the same identifier.
AshDoubleEntry.ULID renders a 128-bit ULID as 26 Crockford base-32 characters, but the first character encodes only 3 bits, so canonical values are 0 to 7. decode/1 in lib/ulid.ex masks the first character to its low 3 bits and valid?/1 accepts all 32 characters in that position, so 0..., 8..., G... and R... decode to the identical 16-byte value and resolve to the same row. When the type is exposed as a public ID over an HTTP or API boundary, an attacker-supplied ID can be spelled differently from the record it actually reads or writes, desynchronizing or bypassing string-level checks such as idempotency and deduplication keys, deny-lists, audit correlation, or signatures computed over the submitted ID.
This issue affects ash_double_entry: from 0.1.0 before 1.0.19. |
| Improper Protection of Alternate Path vulnerability in ash-project ash_lua allows a user-supplied Lua script to read attributes that are not on the exposed-field allow-list.
AshLua exposes Ash resources to Lua scripts, gated by a manifest declaring which fields are exposed. The read action's operation aggregate path in AshLua.Runtime took the field name straight from the Lua call and resolved it with only String.to_existing_atom and Ash.Query.Aggregate.new!, neither of which consults the exposed-field allow-list the normal fields path enforces. A script can therefore read the value of any attribute of any record the actor may read, including private sensitive?: true columns, via resource.read({ operation = {"list", "hashed_password"} }); min and max give a value oracle. Anyone able to submit or influence a Lua script can reach this.
This issue affects ash_lua: from 0.1.0 before 0.2.1. |
| Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in ash-project igniter allows a malicious package publisher to forge the mix igniter.install confirmation prompt.
mix igniter.install prints a confirmation panel (an anti-typosquatting safeguard) listing a package's hex metadata before adding it. The panel builder in Igniter.Project.Deps wrote publisher-controlled fields (meta.description, owner usernames, requirement names, version) to the terminal with only newlines stripped. A malicious or typosquatted package can embed ANSI terminal escape sequences (cursor movement, line erase, carriage returns) in its metadata to overwrite the panel, forging trusted author names and download counts while concealing the real ones, so a developer relying on the panel to vet the package is deceived into approving a malicious dependency.
This issue affects igniter: from 0.8.1 before 0.8.4. |
| Improper Neutralization of Escape, Meta, or Control Sequences vulnerability in ash-project usage_rules allows a malicious package publisher to inject terminal control sequences into the output of mix usage_rules.search_docs.
mix usage_rules.search_docs searches Hex documentation through search.hexdocs.pm, which indexes the documentation of every published package, and prints the matching results (title, package, type, doc reference, and highlighted snippets) to the terminal. The formatter in Mix.Tasks.UsageRules.SearchDocs interpolated those publisher-controlled fields verbatim, neutralizing no terminal control characters; the only transform it applied adds escape sequences rather than removing them. A malicious package can embed ANSI terminal escape sequences (cursor movement, line erase, carriage returns, OSC 52 clipboard writes) in its indexed documentation, so when a developer runs a search that surfaces those docs the sequences reach the terminal unchanged — forging the displayed hexdocs URL or a suggested command, hiding text, or writing to the clipboard. No authentication or privileged position is required; only publishing a package.
This issue affects usage_rules: from 0.1.18 before 1.2.8. |
| Use of HTTP Request With Sensitive Query String vulnerability in team-alembic AshAuthenticationPhoenix allows someone able to read access logs, proxy logs or browser history to recover a single-use sign-in token and authenticate as its owner.
After a successful password sign-in, AshAuthentication.Phoenix.Components.Password.SignInForm builds the sign_in_with_token path with the freshly issued user.__metadata__.token as a query parameter and redirects the browser to it with a GET. The token therefore travels in the request line, where web servers, reverse proxies, request telemetry and the browser's own history record it, all of which outlive the request and are ordinarily less protected than session storage. The redirect destination is restricted to a local path, so this is not an open redirect; the exposure is the retention of a live credential.
This issue affects ash_authentication: from 3.10.5 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14; ash_authentication_phoenix: from 1.7.0 before 2.17.4 and from 3.0.0-rc.0 before 3.0.0-rc.11. |
| Supergateway 4.2.0 through 4.2.2 contains a denial of service vulnerability in stdio-to-SSE mode that allows unauthenticated attackers to crash the gateway via prototype-inherited sessionId values. Attackers can send a POST message request with sessionId set to toString or constructor, triggering an unhandled TypeError that terminates every attached MCP session. |
| Pika before 1.5.0 contains an uncontrolled resource allocation vulnerability that allows malicious brokers to exhaust client memory by declaring oversized frame payloads. Attackers can send frame headers declaring up to 4 GiB payloads, unchecked against frame_max, or very large message bodies to terminate consuming applications. |
| Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in TSnap7MicroClient::opReadMultiVars() that allows malicious PLCs to overflow client buffers via unchecked DataLength fields. Attackers controlling or impersonating a PLC can return crafted ReadVar responses to Cli_ReadMultiVars() callers, writing up to 65535 bytes per item to corrupt memory and crash clients. |