Export limit exceeded: 404443 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 25322 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 404443 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25322 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-50763 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: marvell/octeontx - prevent integer overflows The "code_length" value comes from the firmware file. If your firmware is untrusted realistically there is probably very little you can do to protect yourself. Still we try to limit the damage as much as possible. Also Smatch marks any data read from the filesystem as untrusted and prints warnings if it not capped correctly. The "code_length * 2" can overflow. The round_up(ucode_size, 16) + sizeof() expression can overflow too. Prevent these overflows. | ||||
| CVE-2022-50740 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs() Syzkaller reports a long-known leak of urbs in ath9k_hif_usb_dealloc_tx_urbs(). The cause of the leak is that usb_get_urb() is called but usb_free_urb() (or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or urb->ep fields have not been initialized and usb_kill_urb() returns immediately. The patch removes trying to kill urbs located in hif_dev->tx.tx_buf because hif_dev->tx.tx_buf is not supposed to contain urbs which are in pending state (the pending urbs are stored in hif_dev->tx.tx_pending). The tx.tx_lock is acquired so there should not be any changes in the list. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2022-50741 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: Disable useless interrupt to avoid kernel panic There is a hardware bug that the interrupt STMBUF_HALF may be triggered after or when disable interrupt. It may led to unexpected kernel panic. And interrupt STMBUF_HALF and STMBUF_RTND have no other effect. So disable them and the unused interrupts. meanwhile clear the interrupt status when disable interrupt. | ||||
| CVE-2022-50742 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible refcount leak in afu_ioctl() eventfd_ctx_put need to be called to put the refcount that gotten by eventfd_ctx_fdget when ocxl_irq_set_handler fails. | ||||
| CVE-2022-50743 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: Fix pcluster memleak when its block address is zero syzkaller reported a memleak: https://syzkaller.appspot.com/bug?id=62f37ff612f0021641eda5b17f056f1668aa9aed unreferenced object 0xffff88811009c7f8 (size 136): ... backtrace: [<ffffffff821db19b>] z_erofs_do_read_page+0x99b/0x1740 [<ffffffff821dee9e>] z_erofs_readahead+0x24e/0x580 [<ffffffff814bc0d6>] read_pages+0x86/0x3d0 ... syzkaller constructed a case: in z_erofs_register_pcluster(), ztailpacking = false and map->m_pa = zero. This makes pcl->obj.index be zero although pcl is not a inline pcluster. Then following path adds refcount for grp, but the refcount won't be put because pcl is inline. z_erofs_readahead() z_erofs_do_read_page() # for another page z_erofs_collector_begin() erofs_find_workgroup() erofs_workgroup_get() Since it's illegal for the block address of a non-inlined pcluster to be zero, add check here to avoid registering the pcluster which would be leaked. | ||||
| CVE-2022-50744 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix hard lockup when reading the rx_monitor from debugfs During I/O and simultaneous cat of /sys/kernel/debug/lpfc/fnX/rx_monitor, a hard lockup similar to the call trace below may occur. The spin_lock_bh in lpfc_rx_monitor_report is not protecting from timer interrupts as expected, so change the strength of the spin lock to _irq. Kernel panic - not syncing: Hard LOCKUP CPU: 3 PID: 110402 Comm: cat Kdump: loaded exception RIP: native_queued_spin_lock_slowpath+91 [IRQ stack] native_queued_spin_lock_slowpath at ffffffffb814e30b _raw_spin_lock at ffffffffb89a667a lpfc_rx_monitor_record at ffffffffc0a73a36 [lpfc] lpfc_cmf_timer at ffffffffc0abbc67 [lpfc] __hrtimer_run_queues at ffffffffb8184250 hrtimer_interrupt at ffffffffb8184ab0 smp_apic_timer_interrupt at ffffffffb8a026ba apic_timer_interrupt at ffffffffb8a01c4f [End of IRQ stack] apic_timer_interrupt at ffffffffb8a01c4f lpfc_rx_monitor_report at ffffffffc0a73c80 [lpfc] lpfc_rx_monitor_read at ffffffffc0addde1 [lpfc] full_proxy_read at ffffffffb83e7fc3 vfs_read at ffffffffb833fe71 ksys_read at ffffffffb83402af do_syscall_64 at ffffffffb800430b entry_SYSCALL_64_after_hwframe at ffffffffb8a000ad | ||||
| CVE-2022-50751 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: configfs: fix possible memory leak in configfs_create_dir() kmemleak reported memory leaks in configfs_create_dir(): unreferenced object 0xffff888009f6af00 (size 192): comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s) backtrace: kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273) new_fragment (./include/linux/slab.h:600 fs/configfs/dir.c:163) configfs_register_subsystem (fs/configfs/dir.c:1857) basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... unreferenced object 0xffff888003ba7180 (size 96): comm "modprobe", pid 3777, jiffies 4295537735 (age 233.784s) backtrace: kmem_cache_alloc (mm/slub.c:3250 mm/slub.c:3256 mm/slub.c:3263 mm/slub.c:3273) configfs_new_dirent (./include/linux/slab.h:723 fs/configfs/dir.c:194) configfs_make_dirent (fs/configfs/dir.c:248) configfs_create_dir (fs/configfs/dir.c:296) configfs_attach_group.isra.28 (fs/configfs/dir.c:816 fs/configfs/dir.c:852) configfs_register_subsystem (fs/configfs/dir.c:1881) basic_write (drivers/hwtracing/stm/p_basic.c:14) stm_p_basic do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... This is because the refcount is not correct in configfs_make_dirent(). For normal stage, the refcount is changing as: configfs_register_subsystem() configfs_create_dir() configfs_make_dirent() configfs_new_dirent() # set s_count = 1 dentry->d_fsdata = configfs_get(sd); # s_count = 2 ... configfs_unregister_subsystem() configfs_remove_dir() remove_dir() configfs_remove_dirent() # s_count = 1 dput() ... *dentry_unlink_inode()* configfs_d_iput() # s_count = 0, release However, if we failed in configfs_create(): configfs_register_subsystem() configfs_create_dir() configfs_make_dirent() # s_count = 2 ... configfs_create() # fail ->out_remove: configfs_remove_dirent(dentry) configfs_put(sd) # s_count = 1 return PTR_ERR(inode); There is no inode in the error path, so the configfs_d_iput() is lost and makes sd and fragment memory leaked. To fix this, when we failed in configfs_create(), manually call configfs_put(sd) to keep the refcount correct. | ||||
| CVE-2022-50754 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix a memleak in multi_transaction_new() In multi_transaction_new(), the variable t is not freed or passed out on the failure of copy_from_user(t->data, buf, size), which could lead to a memleak. Fix this bug by adding a put_multi_transaction(t) in the error path. | ||||
| CVE-2022-50782 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug_on in __es_tree_search caused by bad quota inode We got a issue as fllows: ================================================================== kernel BUG at fs/ext4/extents_status.c:202! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352 RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0 RSP: 0018:ffffc90001227900 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8 RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001 R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10 R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000 FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_cache_extent+0xe2/0x210 ext4_cache_extents+0xd2/0x110 ext4_find_extent+0x5d5/0x8c0 ext4_ext_map_blocks+0x9c/0x1d30 ext4_map_blocks+0x431/0xa50 ext4_getblk+0x82/0x340 ext4_bread+0x14/0x110 ext4_quota_read+0xf0/0x180 v2_read_header+0x24/0x90 v2_check_quota_file+0x2f/0xa0 dquot_load_quota_sb+0x26c/0x760 dquot_load_quota_inode+0xa5/0x190 ext4_enable_quotas+0x14c/0x300 __ext4_fill_super+0x31cc/0x32c0 ext4_fill_super+0x115/0x2d0 get_tree_bdev+0x1d2/0x360 ext4_get_tree+0x19/0x30 vfs_get_tree+0x26/0xe0 path_mount+0x81d/0xfc0 do_mount+0x8d/0xc0 __x64_sys_mount+0xc0/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_orphan_cleanup ext4_enable_quotas ext4_quota_enable ext4_iget --> get error inode <5> ext4_ext_check_inode --> Wrong imode makes it escape inspection make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode dquot_load_quota_inode vfs_setup_quota_inode --> check pass dquot_load_quota_sb v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent __es_tree_search.isra.0 ext4_es_end --> Wrong extents trigger BUG_ON In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO, the ext4_ext_check_inode check in the ext4_iget function can be bypassed, finally, the extents that are not checked trigger the BUG_ON in the __es_tree_search function. To solve this issue, check whether the inode is bad_inode in vfs_setup_quota_inode(). | ||||
| CVE-2022-50759 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov5648: Free V4L2 fwnode data on unbind The V4L2 fwnode data structure doesn't get freed on unbind, which leads to a memleak. | ||||
| CVE-2022-50760 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix PCI device refcount leak in amdgpu_atrm_get_bios() As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL. If we break the loop in amdgpu_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak. | ||||
| CVE-2022-50761 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/xen: Fix memory leak in xen_init_lock_cpu() In xen_init_lock_cpu(), the @name has allocated new string by kasprintf(), if bind_ipi_to_irqhandler() fails, it should be freed, otherwise may lead to a memory leak issue, fix it. | ||||
| CVE-2025-68758 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: backlight: led-bl: Add devlink to supplier LEDs LED Backlight is a consumer of one or multiple LED class devices, but devlink is currently unable to create correct supplier-producer links when the supplier is a class device. It creates instead a link where the supplier is the parent of the expected device. One consequence is that removal order is not correctly enforced. Issues happen for example with the following sections in a device tree overlay: // An LED driver chip pca9632@62 { compatible = "nxp,pca9632"; reg = <0x62>; // ... addon_led_pwm: led-pwm@3 { reg = <3>; label = "addon:led:pwm"; }; }; backlight-addon { compatible = "led-backlight"; leds = <&addon_led_pwm>; brightness-levels = <255>; default-brightness-level = <255>; }; In this example, the devlink should be created between the backlight-addon (consumer) and the pca9632@62 (supplier). Instead it is created between the backlight-addon (consumer) and the parent of the pca9632@62, which is typically the I2C bus adapter. On removal of the above overlay, the LED driver can be removed before the backlight device, resulting in: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 ... Call trace: led_put+0xe0/0x140 devm_led_release+0x6c/0x98 Another way to reproduce the bug without any device tree overlays is unbinding the LED class device (pca9632@62) before unbinding the consumer (backlight-addon): echo 11-0062 >/sys/bus/i2c/drivers/leds-pca963x/unbind echo ...backlight-dock >/sys/bus/platform/drivers/led-backlight/unbind Fix by adding a devlink between the consuming led-backlight device and the supplying LED device, as other drivers and subsystems do as well. | ||||
| CVE-2025-68752 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Implement settime64 with -EOPNOTSUPP ptp_clock_settime() assumes every ptp_clock has implemented settime64(). Stub it with -EOPNOTSUPP to prevent a NULL dereference. The fix is similar to commit 329d050bbe63 ("gve: Implement settime64 with -EOPNOTSUPP"). | ||||
| CVE-2025-68177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq/longhaul: handle NULL policy in longhaul_exit longhaul_exit() was calling cpufreq_cpu_get(0) without checking for a NULL policy pointer. On some systems, this could lead to a NULL dereference and a kernel warning or panic. This patch adds a check using unlikely() and returns early if the policy is NULL. Bugzilla: #219962 | ||||
| CVE-2025-68762 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: initialize work queue before error checks Prevent a kernel warning when netconsole setup fails on devices with IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in __flush_work) occurs because the cleanup path tries to cancel an uninitialized work queue. When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL, it fails early and calls skb_pool_flush() for cleanup. This function calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been initialized yet, triggering the warning. Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the work queue is properly initialized before any potential failure points. This allows the cleanup path to safely cancel the work queue regardless of where the setup fails. | ||||
| CVE-2025-40089 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/features: Add check for no entries in cxl_feature_info cxl EDAC calls cxl_feature_info() to get the feature information and if the hardware has no Features support, cxlfs may be passed in as NULL. [ 51.957498] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 51.965571] #PF: supervisor read access in kernel mode [ 51.971559] #PF: error_code(0x0000) - not-present page [ 51.977542] PGD 17e4f6067 P4D 0 [ 51.981384] Oops: Oops: 0000 [#1] SMP NOPTI [ 51.986300] CPU: 49 UID: 0 PID: 3782 Comm: systemd-udevd Not tainted 6.17.0dj test+ #64 PREEMPT(voluntary) [ 51.997355] Hardware name: <removed> [ 52.009790] RIP: 0010:cxl_feature_info+0xa/0x80 [cxl_core] Add a check for cxlfs before dereferencing it and return -EOPNOTSUPP if there is no cxlfs created due to no hardware support. | ||||
| CVE-2025-40175 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: cleanup remaining SKBs in PTP flows When the driver requests Tx timestamp value, one of the first steps is to clone SKB using skb_get. It increases the reference counter for that SKB to prevent unexpected freeing by another component. However, there may be a case where the index is requested, SKB is assigned and never consumed by PTP flows - for example due to reset during running PTP apps. Add a check in release timestamping function to verify if the SKB assigned to Tx timestamp latch was freed, and release remaining SKBs. | ||||
| CVE-2025-40153 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: avoid soft lockup when mprotect to large memory area When calling mprotect() to a large hugetlb memory area in our customer's workload (~300GB hugetlb memory), soft lockup was observed: watchdog: BUG: soft lockup - CPU#98 stuck for 23s! [t2_new_sysv:126916] CPU: 98 PID: 126916 Comm: t2_new_sysv Kdump: loaded Not tainted 6.17-rc7 Hardware name: GIGACOMPUTING R2A3-T40-AAV1/Jefferson CIO, BIOS 5.4.4.1 07/15/2025 pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mte_clear_page_tags+0x14/0x24 lr : mte_sync_tags+0x1c0/0x240 sp : ffff80003150bb80 x29: ffff80003150bb80 x28: ffff00739e9705a8 x27: 0000ffd2d6a00000 x26: 0000ff8e4bc00000 x25: 00e80046cde00f45 x24: 0000000000022458 x23: 0000000000000000 x22: 0000000000000004 x21: 000000011b380000 x20: ffff000000000000 x19: 000000011b379f40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc875e0aa5e2c x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : fffffc01ce7a5c00 x4 : 00000000046cde00 x3 : fffffc0000000000 x2 : 0000000000000004 x1 : 0000000000000040 x0 : ffff0046cde7c000 Call trace: mte_clear_page_tags+0x14/0x24 set_huge_pte_at+0x25c/0x280 hugetlb_change_protection+0x220/0x430 change_protection+0x5c/0x8c mprotect_fixup+0x10c/0x294 do_mprotect_pkey.constprop.0+0x2e0/0x3d4 __arm64_sys_mprotect+0x24/0x44 invoke_syscall+0x50/0x160 el0_svc_common+0x48/0x144 do_el0_svc+0x30/0xe0 el0_svc+0x30/0xf0 el0t_64_sync_handler+0xc4/0x148 el0t_64_sync+0x1a4/0x1a8 Soft lockup is not triggered with THP or base page because there is cond_resched() called for each PMD size. Although the soft lockup was triggered by MTE, it should be not MTE specific. The other processing which takes long time in the loop may trigger soft lockup too. So add cond_resched() for hugetlb to avoid soft lockup. | ||||
| CVE-2025-40110 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a null-ptr access in the cursor snooper Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code. | ||||