| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
failable step) and is freed for symmetry. The order is safe:
hsr_del_port() unregisters each RX handler with synchronize_net()
before hsr_del_nodes() runs, which removes remaining entries with
list_del_rcu() and defers their release with call_rcu() for readers
already under RCU. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.19.0, a crafted PDF can provide unusually large alphabetical page-label values that cause pypdf/_page_labels.py to generate strings beyond a reasonable page-label length when an application retrieves document page labels, consuming excessive memory and potentially making the application unavailable. This issue is fixed in version 6.19.0. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: return compat ioctl results directly
The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but
then calls the native handler. Their different command sizes make native
dispatch return -ENOIOCTLCMD.
For GET_FD, this overwrites receive_fd()'s return value after the
descriptor is installed, leaking one fd per call. Return handled compat
results directly and use native dispatch only for other commands. |
| A command injection vulnerability exists in CLI of the affected HPE Networking Instant ON APs that could allow an unauthenticated adjacent attacker to perform command injection by sending specially crafted packets. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Command injection vulnerabilities exist in the affected interface of HPE Networking Instant ON that could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Issue summary: QUIC process may keep memory for QUIC packet
buffer for much longer period than necessary.
Impact summary: Remote peer can exploit this vulnerability
by sending maliciously crafted packets, making the local
QUIC stack to keep the memory for packet buffers allocated.
The time for which the memory remains allocated is entirely
under the control of the potentially malicious remote peer.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: To save copy operation from the packet buffer to the
stream reassemble buffer the QUIC stack leaves the stream data
on the packet buffer waiting to be copied to a buffer provided
by the local receiving application. The QUIC stack releases
a reference to the packet buffer only after the data are copied
to the application buffer. This design is more efficient for
legitimate data transfers but enables an attacker to allocate a lot
more memory than actually required by the data kept in the receiving
stream buffer.
To mitigate the vulnerability, the QUIC stack now calculates
and monitors memory overhead for every stream. The memory overhead
for a single stream frame is calculated as a difference between the
size of the whole packet that carries the stream frame and the size
of the stream frame itself. The memory overhead for a single stream
frame is added to the total (cumulative) memory overhead QUIC stack
keeps for each stream. Once the cumulative memory overhead exceeds
64kB, the QUIC stack moves the stream frame data from the packet
buffer to the stream buffer, starting with the next packet received.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: The QUIC stream reassembly algorithm performance deteriorates
progressively as packets are arriving out of order. The worst case has
a quadratic complexity proportional to the number of stream frames kept in
the buffer for the received stream data.
Impact summary: A remote QUIC peer that completes the handshake can create
a connection-scoped CPU pressure and potentially a Denial of Service using
compliant STREAM frames inside the advertised receive window, with low
attacker bandwidth.
CWE: CWE-407: Inefficient Algorithmic Complexity
Description: OpenSSL manages received QUIC stream fragments using a
doubly-linked list. While it optimizes for append operations (at the end of
the list), it falls back to a head-to-tail linear search for any fragment
that does not immediately follow the current `tail`.
By manipulating the sequence of offsets, an attacker can force the server
to perform O(n^2) operations, consuming excessive CPU time for the
QUIC process.
FIPS impact: no
The FIPS module is not affected as the QUIC implementation is outside of
the OpenSSL FIPS module boundary. |
| Issue summary: A certificate with many nameRelativeToCRLIssuer CRL
distribution points causes disproportionate heap growth when OpenSSL caches
X.509 extensions.
Impact summary: Receiving a crafted certificate from a malicious peer can lead
to significant memory pressure and possible Denial of Service in clients or
in servers that solicit client certificates.
CWE: CWE-770: Allocation of Resources Without Limits or Throttling
Description: A certificate or a set of certificates that fits under the limit for
size of certificates accepted from the peer (~100 KiB) can result in allocation
of several hundred MiB of resident memory on the receiving side
during a normal TLS handshake. This may be enough to crash the client or
server, if multiple concurrent connections lead to similarly large memory
allocations.
The fix postpones processing of the CRL distribution points extensions in
certificates to the time when the processed value is required for CRL processing.
This avoids keeping large memory allocations for a long time when such
certificates are received.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where an unprivileged user could cause a memory leak in error paths leading to kernel memory exhaustion. A successful exploit of this vulnerability might lead to denial of service. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer, where a user could cause uncontrolled resource consumption by exhausting the DRM VMA offset address space. A successful exploit of this vulnerability might lead to denial of service. |
| NVIDIA GPU Display Driver for Linux contains a vulnerability in the kernel mode layer where a user could cause uncontrolled kernel log generation by repeatedly invoking an interface that emits unrate-limited error messages. A successful exploit of this vulnerability might lead to denial of service. |
| Apache XmlSchema doesn't limit how deeply schema imports and includes can be nested, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service.
Users are recommended to upgrade to version 2.3.3, which fixes this issue. |
| Apache XmlSchema doesn't limit how deeply schema structures can be nested when it builds its schema model, so a malicious schema can make parsing recurse until the stack overflows. This causes a denial of service.
Users are recommended to upgrade to version 2.3.3, which fixes this issue. |
| The TFTP server accepts a DATA datagram of any size. The dispatcher rejects datagrams shorter than
four bytes (nxd_tftp_server.c:1037) and nothing anywhere checks an upper bound, in particular not
against the protocol maximum of 4 + NX_TFTP_FILE_TRANSFER_MAX. Two things follow from that one
missing check, both reachable before any authentication because TFTP has none.
The handler passes `nx_packet_length - 4` straight to FileX:
```c
/* addons/tftp/nxd_tftp_server.c:1863, 1889 */
status = nx_packet_copy(packet_ptr, &temp_ptr,
server_ptr -> nx_tftp_server_packet_pool_ptr, NX_WAIT_FOREVER);
...
fx_file_write(&(client_request_ptr -> nx_tftp_client_request_file),
packet_ptr -> nx_packet_prepend_ptr + 4,
packet_ptr -> nx_packet_length - 4);
```
`nx_packet_length` is the length of a chain, not of one contiguous buffer, so FileX copies past the
end of the first packet:
```
ERROR: AddressSanitizer: heap-buffer-overflow
READ of size 1280 at 0x621000001108 thread T5
#0 __interceptor_memcpy
#1 _fx_utility_memory_copy filex/common/src/fx_utility_memory_copy.c:78
0x621000001108 is 0 bytes to the right of 4104-byte region
```
Those bytes are written into the file the attacker is uploading, and a TFTP read request hands them
back, so this is a memory disclosure with a convenient retrieval channel.
The same datagram also wedges the server. `nx_packet_copy` at :1863 needs
ceil(nx_packet_length / pool_payload) packets and asks for them with NX_WAIT_FOREVER, so when the
attacker sizes the datagram beyond what the pool holds, the server thread suspends and never
returns. A liveness probe after one such datagram times out with the pool at 0 of 12 packets and
the server thread suspended, and no later client is served.
Reject `nx_packet_length > 4 + NX_TFTP_FILE_TRANSFER_MAX` in the DATA branch before either call,
and use a bounded wait rather than NX_WAIT_FOREVER for the copy. |
| A vulnerability in the API endpoint of HPE Networking Instant ON APs could allow an authenticated remote attacker with high privileges to conduct a server-side request forgery (SSRF) attack. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Server-side memory exhaustion in Apache MINA SSHD 1.0.0 to 2.19.0 and 3.0.0-M1 to 3.0.0-M5, component sshd-sftp, in the SFTP v6 check-file-name/check-file-handle extension. Apache MINA SSHD is a Java library for client-side and server-side SSH.
Using a very small "block size" (for instance 256, which is the minimum) on a huge file generates many (file size / block size) hashes. The resulting SFTP reply message was accumulated fully in memory server-side, which could, with a suitably large (possibly sparse) file exhaust the server-side memory, taking down the server.
Users are recommended to upgrade to version 2.20.0 or 3.0.0-M6, which fix this issue by imposing a maximum limit on the size of the reply. Many SFTP implementations have a general limit on the size of SFTP messages anyway; typically 256kB as in OpenSSH or also in Apache MINA SSHD. |
| Pexip Infinity 30.0 through 40.x before 41.0 is affected by improper input validation in the web server that allows a malicious attacker to render a Pexip Infinity node inaccessible. |
| Russh is a Rust SSH client and server library. Prior to 0.63.2, an authenticated remote peer can send SSH_MSG_KEXINIT without the required SSH_MSG_KEX_ECDH_INIT and then flood SSH_MSG_CHANNEL_OPEN messages while SessionKexState::InProgress prevents priority_receiver in russh/src/server/session.rs from being drained. The server continues processing network input and enqueues a ChannelOpenReply for each request on an unbounded channel, allowing one connection to grow memory until the process is terminated. This issue is fixed in version 0.63.2. |
| The CODESYS Gateway Client allocates memory based on a size field in a gateway response without enforcing an appropriate upper limit. An unauthenticated remote attacker controlling a malicious gateway can exploit this behavior to trigger excessive memory consumption, resulting in a denial-of-service condition thus leading to a total loss of availablity. |
| simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin does not completely reject configuration includes supplied through customArgs to git.clone(). The missing include.path classification permits Git to load an attacker-controlled configuration file, and the initial remediation does not cover includeIf.<condition>.path, allowing the same file-loading primitive through a conditional include. A loaded configuration can set an executable Git option such as core.sshCommand, which Git invokes during the clone operation with the privileges of the Node.js process. Exploitation requires the application to pass attacker-influenced custom arguments and requires an attacker-controlled file that the process can read. This issue is fixed in 4.0.0. |
