| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An improper verification of a loaded library in Zscaler Client Connector on Mac < 4.2.0.241 may allow a local attacker to elevate their privileges. |
| xml-crypto is an xml digital signature and encryption library for Node.js. In affected versions the default configuration does not check authorization of the signer, it only checks the validity of the signature per section 3.2.2 of the w3 xmldsig-core-20080610 spec. As such, without additional validation steps, the default configuration allows a malicious actor to re-sign an XML document, place the certificate in a `<KeyInfo />` element, and pass `xml-crypto` default validation checks. As a result `xml-crypto` trusts by default any certificate provided via digitally signed XML document's `<KeyInfo />`. `xml-crypto` prefers to use any certificate provided via digitally signed XML document's `<KeyInfo />` even if library was configured to use specific certificate (`publicCert`) for signature verification purposes. An attacker can spoof signature verification by modifying XML document and replacing existing signature with signature generated with malicious private key (created by attacker) and by attaching that private key's certificate to `<KeyInfo />` element. This vulnerability is combination of changes introduced to `4.0.0` on pull request 301 / commit `c2b83f98` and has been addressed in version 6.0.0 with pull request 445 / commit `21201723d`. Users are advised to upgrade. Users unable to upgrade may either check the certificate extracted via `getCertFromKeyInfo` against trusted certificates before accepting the results of the validation or set `xml-crypto's getCertFromKeyInfo` to `() => undefined` forcing `xml-crypto` to use an explicitly configured `publicCert` or `privateKey` for signature verification. |
| CMSaaSStarter is a SaaS template/boilerplate built with SvelteKit, Tailwind, and Supabase. Any forks of the CMSaaSStarter template before commit 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 are impacted. The issue is the user JWT Token is not verified on server session. You should take the patch 7904d416d2c72ec75f42fbf51e9e64fa74062ee6 into your fork.
|
| sshpiper is a reverse proxy for sshd. Starting in version 1.0.50 and prior to version 1.3.0, the way the proxy protocol listener is implemented in sshpiper can allow an attacker to forge their connecting address. Commit 2ddd69876a1e1119059debc59fe869cb4e754430 added the proxy protocol listener as the only listener in sshpiper, with no option to toggle this functionality off. This means that any connection that sshpiper is directly (or in some cases indirectly) exposed to can use proxy protocol to forge its source address. Any users of sshpiper who need logs from it for whitelisting/rate limiting/security investigations could have them become much less useful if an attacker is sending a spoofed source address. Version 1.3.0 contains a patch for the issue. |
| Improper verification of cryptographic signature issue exists in "FreeFrom - the nostr client" App versions prior to 1.3.5 for Android and iOS. The affected app cannot detect event data with invalid signatures. |
| A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0. |
| Insufficient verification of data authenticity in some Intel(R) DSA software before version 23.4.39 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| gitoxide An idiomatic, lean, fast & safe pure Rust implementation of Git. `gix-path` can be tricked into running another `git.exe` placed in an untrusted location by a limited user account on Windows systems. Windows permits limited user accounts without administrative privileges to create new directories in the root of the system drive. While `gix-path` first looks for `git` using a `PATH` search, in version 0.10.8 it also has a fallback strategy on Windows of checking two hard-coded paths intended to be the 64-bit and 32-bit Program Files directories. Existing functions, as well as the newly introduced `exe_invocation` function, were updated to make use of these alternative locations. This causes facilities in `gix_path::env` to directly execute `git.exe` in those locations, as well as to return its path or whatever configuration it reports to callers who rely on it. Although unusual setups where the system drive is not `C:`, or even where Program Files directories have non-default names, are technically possible, the main problem arises on a 32-bit Windows system. Such a system has no `C:\Program Files (x86)` directory. A limited user on a 32-bit Windows system can therefore create the `C:\Program Files (x86)` directory and populate it with arbitrary contents. Once a payload has been placed at the second of the two hard-coded paths in this way, other user accounts including administrators will execute it if they run an application that uses `gix-path` and do not have `git` in a `PATH` directory. (While having `git` found in a `PATH` search prevents exploitation, merely having it installed in the default location under the real `C:\Program Files` directory does not. This is because the first hard-coded path's `mingw64` component assumes a 64-bit installation.). Only Windows is affected. Exploitation is unlikely except on a 32-bit system. In particular, running a 32-bit build on a 64-bit system is not a risk factor. Furthermore, the attacker must have a user account on the system, though it may be a relatively unprivileged account. Such a user can perform privilege escalation and execute code as another user, though it may be difficult to do so reliably because the targeted user account must run an application or service that uses `gix-path` and must not have `git` in its `PATH`. The main exploitable configuration is one where Git for Windows has been installed but not added to `PATH`. This is one of the options in its installer, though not the default option. Alternatively, an affected program that sanitizes its `PATH` to remove seemingly nonessential directories could allow exploitation. But for the most part, if the target user has configured a `PATH` in which the real `git.exe` can be found, then this cannot be exploited. This issue has been addressed in release version 0.10.9 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Incorrect access control in Mirotalk before commit 9de226 allows attackers to arbitrarily change usernames via sending a crafted roomAction request to the server. |
| A certificate with a URI which has a IPv6 address with a zone ID may incorrectly satisfy a URI name constraint that applies to the certificate chain. Certificates containing URIs are not permitted in the web PKI, so this only affects users of private PKIs which make use of URIs. |
| An code execution vulnerability exists in the Xiaomi smarthome application product. The vulnerability is caused by improper input validation and can be exploited by attackers to execute malicious code. |
| An intent redriction vulnerability exists in the Xiaomi quick App framework application product. The vulnerability is caused by improper input validation and can be exploited by attackers tointent redriction. |
| A code execution vulnerability exists in the Xiaomi shop applicationproduct. The vulnerability is caused by improper input validation and can be exploited by attackers to execute malicious code. |
| tiny-secp256k1 is a tiny secp256k1 native/JS wrapper. Prior to version 1.1.7, a malicious JSON-stringifyable message can be made passing on verify(), when global Buffer is the buffer package. This affects only environments where require('buffer') is the NPM buffer package. Buffer.isBuffer check can be bypassed, resulting in strange objects being accepted as a message, and those messages could trick verify() into returning false-positive true values. This issue has been patched in version 1.1.7. |
| The OpenSAML C++ library before 3.3.1 allows forging of signed SAML messages via parameter manipulation (when using SAML bindings that rely on non-XML signatures). |
| An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111. |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. |
| sigstore-java is a sigstore java client for interacting with sigstore infrastructure. sigstore-java has insufficient verification for a situation where a validly-signed but "mismatched" bundle is presented as proof of inclusion into a transparency log. This bug impacts clients using any variation of KeylessVerifier.verify(). The verifier may accept a bundle with an unrelated log entry, cryptographically verifying everything but fails to ensure the log entry applies to the artifact in question, thereby "verifying" a bundle without any proof the signing event was logged. This allows the creation of a bundle without fulcio certificate and private key combined with an unrelated but time-correct log entry to fake logging of a signing event. A malicious actor using a compromised identity may want to do this to prevent discovery via rekor's log monitors. The signer's identity will still be available to the verifier. The signature on the bundle must still be on the correct artifact for the verifier to pass. sigstore-gradle-plugin and sigstore-maven-plugin are not affected by this as they only provide signing functionality. This issue has been patched in v1.1.0 release with PR #856. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| This vulnerability exists in the TP-Link Archer C50 due to improper signature verification mechanism in the firmware upgrade process at its web interface. An attacker with administrative privileges within the router’s Wi-Fi range could exploit this vulnerability by uploading and executing malicious firmware which could lead to complete compromise of the targeted device. |
| cjwt is a C JSON Web Token (JWT) Implementation. Algorithm confusion occurs when a system improperly verifies the type of signature used, allowing attackers to exploit the lack of distinction between signing methods. If the system doesn't differentiate between an HMAC signed token and an RS/EC/PS signed token during verification, it becomes vulnerable to this kind of attack. For instance, an attacker could craft a token with the alg field set to "HS256" while the server expects an asymmetric algorithm like "RS256". The server might mistakenly use the wrong verification method, such as using a public key as the HMAC secret, leading to unauthorised access. For RSA, the key can be computed from a few signatures. For Elliptic Curve (EC), two potential keys can be recovered from one signature. This can be used to bypass the signature mechanism if an application relies on asymmetrically signed tokens. This issue has been addressed in version 2.3.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
