| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Command injection vulnerabilities in the API endpoint of AOS-CX could allow an authenticated remote attacker with administrative privileges to inject arbitrary commands. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system. |
| Authenticated path traversal vulnerabilities exist in API endpoints of AOS-CX. Successful exploitation of these vulnerabilities allows an attacker to write arbitrary files to the underlying operating system, which could lead to remote code execution. |
| An unauthenticated Denial-of-Service (DoS) vulnerability exists in the API endpoint of AOS-CX. Successful exploitation of this vulnerability results in the ability to interrupt the normal operation of the affected service. |
| A buffer overflow vulnerability exists in the underlying operating system of AOS-CX that could lead to unauthenticated disclosure of sensitive information by sending specially crafted packets to the affected system. Successful exploitation of this vulnerability could result in limited disclosure or modification of information and disruption of the affected system. |
| Vulnerabilities in the API endpoint of AOS-CX could allow a remote attacker authenticated with low privileges to access sensitive information. A successful exploit allows an attacker to retrieve information which could be used to potentially gain further access to network services supported by AOS-CX. |
| A signature verification bypass vulnerability exists in the command line interface of AOS-CX. Successful exploitation could allow an authenticated malicious actor with administrative privileges to execute arbitrary code on the underlying operating system, when certain pre-conditions outside of the attacker’s control are met. |
| Vulnerabilities have been identified in the API endpoint of AOS-CX switches that could potentially allow an unauthenticated remote actor to circumvent existing authentication controls. |
| Vulnerabilities have been identified in the operating system of AOS-CX switches that could potentially allow an unauthenticated remote actor to circumvent existing authentication controls. Successful exploitation could compromise system integrity and further expose sensitive information. |
| A format string vulnerability exists in the command line interface of AOS-CX that could lead to unauthenticated remote code execution. Successful exploitation of this vulnerability results in the ability to execute arbitrary code as a privileged user on the underlying operating system. |
| A vulnerability in the web-based management interface of AOS-CX could allow an authenticated remote attacker to conduct a stored cross-site scripting (XSS) attack against an administrative user of the interface. A successful exploit allows an attacker to execute arbitrary script code in a victim's browser in the context of the affected interface. |
| A vulnerability in the web-based management interface of AOS-CX switches exposes some sessions to a lack of Cross-Site Request Forgery (CSRF) protection. This could allow a remote unauthenticated attacker to execute arbitrary input against the affected interface if the attacker can convince an authenticated user of the interface to interact with a specially crafted URL. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove
The threaded IRQ handler ccg_irq_handler() calls ucsi_notify_common(),
which on a connector-change event calls ucsi_connector_change() and
schedules connector work. In ucsi_ccg_remove(), ucsi_destroy() frees
uc->ucsi (kfree) before free_irq() is called, so a handler invocation
already in flight may access the freed object after ucsi_destroy().
CPU 0 (remove) | CPU 1 (threaded IRQ)
ucsi_destroy(uc->ucsi) | ccg_irq_handler()
kfree(ucsi) // FREE | ucsi_notify_common(uc->ucsi) // USE
Move free_irq() before ucsi_destroy() in the remove path. It is kept
after ucsi_unregister(): ucsi_unregister() cancels connector work whose
handler issues GET_CONNECTOR_STATUS through ucsi_send_command_common(),
which waits for a completion that is signalled from the IRQ handler, so
the IRQ must stay active until that work has been cancelled.
The probe error path already orders free_irq() before ucsi_destroy().
This bug was found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: Validate SVID index in svdm_consume_modes()
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struct tcpm_port, indexing past svids reads into
adjacent fields. In particular:
- At index 16, it reads the altmodes count.
- At index 18 and beyond, it reads into altmode_desc[], which contains
partner-supplied SVDM Discovery Modes VDOs.
By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index
to 20, the partner can force paltmode->svid to be loaded with an arbitrary,
partner- chosen SVID, which is then registered via
typec_partner_register_altmode().
Fix this by validating that pmdata->svid_index is non-negative and strictly
less than pmdata->nsvids before accessing the pmdata->svids array inside
svdm_consume_modes(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: require source read access for duplicate extents
FSCTL_DUPLICATE_EXTENTS_TO_FILE passes the source file directly to
vfs_clone_file_range() or vfs_copy_file_range() without checking the SMB
access mask granted to the source handle. A handle opened with attribute
access can consequently be used to copy file contents into an
attacker-readable destination.
Require FILE_READ_DATA on the source handle before either VFS operation,
matching other ksmbd data-copy paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix UAF of struct file_lock in SMB2_LOCK deferred-lock cancellation
When a blocking byte-range lock request is deferred in the
FILE_LOCK_DEFERRED path, ksmbd registers the asynchronous work into
the connection's async_requests list via setup_async_work(). The cancel
callback smb2_remove_blocked_lock() holds a reference to the flock.
If the lock waiter is subsequently woken up but the work state is no
longer KSMBD_WORK_ACTIVE (e.g., due to a concurrent cancellation), the
cleanup path calls locks_free_lock(flock) without dequeuing the work from
the async_requests list. Concurrently, smb2_cancel() walks the list
under conn->request_lock and invokes the cancel callback, which then
dereferences the already freed 'flock'. This leads to a slab-use-after-free
inside __wake_up_common.
Fix this by restructuring the cleanup logic after the worker returns
from ksmbd_vfs_posix_lock_wait(). Move list_del(&smb_lock->llist) and
release_async_work(work) to the top of the cleanup block. This guarantees
that the async work is completely dequeued and serialized under
conn->request_lock before locks_free_lock(flock) is called, rendering
the flock unreachable for any concurrent smb2_cancel(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: add a permission check for FSCTL_SET_ZERO_DATA
FSCTL_SET_ZERO_DATA in smb2_ioctl() destroys file data via
ksmbd_vfs_zero_data() -> vfs_fallocate(PUNCH_HOLE/ZERO_RANGE) after
checking only the share-level KSMBD_TREE_CONN_FLAG_WRITABLE, with no
per-handle access check. A handle opened with only FILE_WRITE_ATTRIBUTES
still yields an FMODE_WRITE filp (FILE_WRITE_ATTRIBUTES is part of
FILE_WRITE_DESIRE_ACCESS_LE, so smb2_create_open_flags() opens it
O_WRONLY), so the vfs_fallocate FMODE_WRITE check does not stop it; only
the missing fp->daccess gate would. Reproduced on mainline 7.1-rc7 with
KASAN by an authenticated SMB client: a FILE_WRITE_ATTRIBUTES-only handle
zeroed 4096 bytes of file data it had no FILE_WRITE_DATA right to
(6/6; a FILE_READ_DATA-only handle was correctly denied).
This is the unfixed sibling of commit cc57232cae23 ("ksmbd: fix FSCTL
permission bypass by adding a permission check for FSCTL_SET_SPARSE").
Because SET_ZERO_DATA writes data (not an attribute), require
FILE_WRITE_DATA. |
| Unauthenticated Server Side Request Forgery (SSRF) in LiteSpeed Cache <= 7.9 versions. |
| R2R through 3.6.6 contains a SQL injection vulnerability that allows unauthenticated attackers to inject SQL predicates into the chunks search query by manipulating the filter key parameter in the retrieval search endpoint. Attackers can exploit the direct interpolation of filter keys into the SQL WHERE clause without parameterization or escaping to perform time-based and boolean-based data exfiltration from the application database. |
| Medplum is a developer platform that enables development of healthcare apps. In Medplum versions 4.1.10 through 5.1.6, the /oauth2/register endpoint could return the client_secret of preconfigured OAuth clients defined via the defaultOAuthClients server configuration when a matching redirect_uri was provided. This issue has been patched in version 5.1.7. |
| A relative path traversal issue in the zip extraction functionality in AWS diagram-as-code (awsdac) in versions 0.10 through 0.23 can allow a third party to write arbitrary files to the local filesystem via crafted zip entry names containing path traversal sequences. This could allow the third party to perform inappropriate actions in the diagram bundle.
To remediate this issue, users should upgrade to the version 0.24 or later. |
