| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject MEM_ALLOC BTF accesses past object bounds
BTF struct walks relax the struct-size check for accesses through a
trailing flexible array. That is valid for ordinary BTF type walking, but
PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static
BTF type size.
When walking a MEM_ALLOC object, reject the access before applying the
flexible-array relaxation if the access range extends past the struct size.
Apply the same policy to struct ID matching so kfunc and kptr type checks
do not walk past the allocated object bounds either. |
| vm2 through 3.12.0 exposes Node.js's crypto.setFips() function to untrusted guest code when an embedder explicitly allowlists the crypto builtin for a NodeVM (require.builtin: ['crypto']). The builtin sanitizer (sanitizeCryptoModule in lib/builtin.js) replaces crypto.setEngine but leaves crypto.setFips callable, and the readonly wrapper used to expose the host module does not localize side effects of forwarded host functions. Guest code can therefore call crypto.setFips() to change the FIPS mode of the entire host process; the modified mode is subsequently observed by trusted host code (crypto.getFips() changed from 0 to 1 in the reported test), crossing the NodeVM isolation boundary. Fixed in vm2 3.12.1. |
| ruby-jwt is a Ruby implementation of the RFC 7519 OAuth JSON Web Token standard. Prior to 2.10.3 and 3.2.0, JWT.decode(token, '', true, algorithm: 'HS256') accepts an attacker-forged token because OpenSSL::HMAC.digest('SHA256', '', payload) returns a valid digest under an empty key and no empty-key precondition exists in the HMAC algorithm. The same path is reached when a keyfinder block or key_finder: argument returns an empty string, nil, or an array containing nil for an unknown key, affecting HS256, HS384, and HS512 verification through JWT.decode and JWT::EncodedToken#verify_signature!. This issue is fixed in versions 2.10.3 and 3.2.0. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix out-of-bounds write when probed more than once
imx6_soc_volt is allocated fresh on every probe, sized to the number of
ARM OPPs:
imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
GFP_KERNEL);
but it is filled through soc_opp_count, which has static storage and is
never reset. A second bind after an unbind keeps indexing from where the
first one stopped, and writes past the end of the new array.
Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN:
BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34
Write of size 4 at addr c5e90480 by task binder/73
imx6q_cpufreq_probe from platform_probe+0x88/0xe4
platform_probe from really_probe+0x108/0x384
bind_store from kernfs_fop_write_iter+0x1b4/0x28c
The write lands one u32 past the end of the allocation.
soc_opp_count is only read a few lines below the loop that fills it, so it
never needed static storage. Make it a local. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: coreboot: Validate table bounds
The existing coreboot_table_populate() bounds checks limit individual
entries to the mapped length. However, coreboot_table_probe() replaces
the platform resource length with header and table sizes supplied by
firmware before mapping the full table.
A malformed table can overflow the 32-bit size addition or advertise an
extent beyond the resource, causing the driver to map and parse memory
outside the resource. A resource shorter than the fixed header is also
mapped as though it contained a complete header.
Reject resources shorter than the fixed header. After validating the
signature, require a complete header, calculate the advertised extent
with overflow checking, and reject extents beyond the resource before
remapping the table. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: avoid userspace overflow on invalid optlen
nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so
the kernel always stores 4 bytes regardless of the caller-supplied
optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length
reported back to userspace; it does not constrain the store. A call with
optlen < 4 therefore writes past the user buffer, violating the
getsockopt(2) contract for all five supported optnames.
Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a
plain size comparison would promote a negative optlen to size_t and slip
past the check; an explicit 'len < 0' test is added first to catch
negative values before the size compare. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The
subsequent memcpy() destination advances by sizeof(full struct) per slot
via C pointer arithmetic, not by the clamped len. When firmware sends
short TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 IBM MQ C client could allow a remote attacker to cause a denial of service or potentially execute arbitrary code due to improper validation of queue manager responses when requesting AMS policy data. |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to obtain sensitive information or cause a denial of service due to improper validation of message header offset values. |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code during queue manager startup due to improper validation of cluster migration data. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: kyro: Validate overlay viewport coordinates
The overlay viewport end coordinates are computed from the viewport
origin and dimensions using 32-bit unsigned arithmetic. Large input
values can cause these calculations to wrap around before the resulting
coordinates are passed to SetOverlayViewPort().
SetOverlayViewPort() packs the viewport coordinates into 16-bit
register fields. The X coordinates are additionally adjusted by +2
and +1 before being written. Validate the coordinate calculations
for 32-bit wraparound and ensure that the adjusted coordinates fit
within their 16-bit register fields before calling
SetOverlayViewPort().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, so those bytes reach the target. SRP_AER_REQ behaves the same way
and also reads req->lun.
The leak is 8 bytes per response. max_ti_iu_len also decides which slab
cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and
the read is entirely outside it:
BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0
Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of
allocated 8-byte region [ffff888104714da0, ffff888104714da8)
Without KASAN the returned bytes are whatever is next in the slab. One
run returned ".strtab".
rsp->data[3] in srp_process_rsp() has the same problem: only
resp_data_len is checked before it is read.
Drop a request that is shorter than the structure being parsed, and
check byte_len before the tsk_mgmt read. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate external xattr entries when reading metadata
ocfs2_validate_xattr_block() checks the xattr block header before the
block reaches higher-level xattr users, but it does not verify that a
non-indexed block's xh_count and entry offsets fit inside the block.
Indexed buckets likewise reach list/get consumers after ECC without an
entry-bounds check.
Use the flat xattr entry validator for non-indexed external xattr blocks,
and use a bucket-specific validator for indexed buckets at metadata read
time. The bucket validator keeps the entry array bounded by the first
bucket block while checking name/value offsets against the bucket block
they target.
Reject corrupted external xattr metadata before listxattr() or getxattr()
can walk out-of-range entry arrays or name/value offsets.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190
Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_list_entries+0xd7/0x190
ocfs2_listxattr+0x3f6/0x610
listxattr+0x90/0xe0
path_listxattrat+0xed/0x220
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: don't force read-only on transient -EAGAIN from reloc merge
On a zoned FS, btrfs_delayed_refs_rsv_refill() returns -EAGAIN whenever
the over-committed metadata plus the zone_unusable bytes exceeds the
usable size in a metadata block-group to avoid heavy over-commit of
metadata and early ENOSPC in one transaction.
If this happens while doing reclaim, the transaction is getting aborted.
Treat -EAGAIN as a soft, retryable condition in case of block-group
reclaim. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx()
When mac80211 leaves the link unspecified, mt7996_tx() substitutes the
primary link id of the station or vif. That value is
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added,
and it is then used unchecked to index vif->link_conf[],
mvif->mt76.link[] and sta->link[], all of which hold
IEEE80211_MLD_MAX_NUM_LINKS (15) entries.
Clamp the primary link id to the default link before using it, and use
the clamped value for the link_sta fallback as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: reserve space for the CSA-abort countdown TLV
When a CSA countdown is active, mt7996_mcu_beacon_cntdwn() emits two
bss_bcn_cntdwn_tlv entries (the CSA countdown and the CCA-abort BCC), but
MT7996_BEACON_UPDATE_SIZE only reserved one. With MBSSID enabled and a
near-maximum beacon template the extra 8 bytes could push the offload
command past MT7996_MAX_BSS_OFFLOAD_SIZE and trigger skb_over_panic().
Reserve room for both countdown TLVs. |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
