| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Subscriber Broken Access Control in Delete All Comments of wordpress <= 7.1 versions. |
| Unauthenticated Cross Site Scripting (XSS) in WP Mailster <= 1.9.0.0 versions. |
| Unauthenticated Privilege Escalation in Salon booking system <= 10.31.7 versions. |
| Unauthenticated Sensitive Data Exposure in SiteVault – Backup, Restore, Migration & Cloning <= 1.5.17 versions. |
| Subscriber SQL Injection in Paid Member Subscriptions <= 3.1.1 versions. |
| Insertion of Sensitive Information Into Sent Data vulnerability in StylemixThemes Motors allows Retrieve Embedded Sensitive Data.
This issue affects Motors: from n/a through 1.4.124. |
| An uncontrolled resource consumption vulnerability in the Fireware OS login process (wgagent) allows a remote, unauthenticated attacker to cause a denial of service by sending a specially crafted request. |
| An improper authorization vulnerability in Fireware OS's Access Portal reverse proxy allows an authenticated, low-privileged Access Portal user to access other web applications they are not authorized for by sending a specially crafted request for a different resource which they are authorized to access. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/dax: check zero or empty entry before converting xarray entry
Calling dax_to_folio() with empty entry causes kernel panic below when
booting a VM with DAX enabled storage.
This patch checks empty entry before calling dax_to_folio() on
dax_associate_entry(), dax_disassociate_entry(), and dax_busy_page().
Commit 98c183a4fccf ("fs/dax: don't disassociate zero page entries") added
guards in the associate and disassociate paths, but the guards still come
after dax_to_folio(), and dax_busy_page() still has the same problem.
[ 0.737679] EXT4-fs (pmem0p1): mounted filesystem 79676804-7c8b-491a-b2a6-9bae3c72af70 ro with ordered data mode. Quota mode: disabled.
[ 0.737891] VFS: Mounted root (ext4 filesystem) readonly on device 259:1.
[ 0.739119] devtmpfs: mounted
[ 0.739476] Freeing unused kernel memory: 1920K
[ 0.740156] Run /sbin/init as init process
[ 0.740229] with arguments:
[ 0.740286] /sbin/init
[ 0.740321] with environment:
[ 0.740369] HOME=/
[ 0.740400] TERM=linux
[ 0.743162] Unable to handle kernel paging request at virtual address fffffdffbf000008
[ 0.743285] Mem abort info:
[ 0.743316] ESR = 0x0000000096000006
[ 0.743371] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.743444] SET = 0, FnV = 0
[ 0.743489] EA = 0, S1PTW = 0
[ 0.743545] FSC = 0x06: level 2 translation fault
[ 0.743610] Data abort info:
[ 0.743656] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 0.743720] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 0.743785] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 0.743848] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000b9d17000
[ 0.743931] [fffffdffbf000008] pgd=10000000bfa3d403, p4d=10000000bfa3d403, pud=1000000040bfe403, pmd=0000000000000000
[ 0.744070] Internal error: Oops: 0000000096000006 [#1] SMP
[ 0.748888] CPU: 0 UID: 0 PID: 1 Comm: init Not tainted 6.18.4 #1 NONE
[ 0.749421] pstate: 004000c5 (nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.749969] pc : dax_disassociate_entry.constprop.0+0x20/0x50
[ 0.750444] lr : dax_insert_entry+0xcc/0x408
[ 0.750802] sp : ffff80008000b9e0
[ 0.751083] x29: ffff80008000b9e0 x28: 0000000000000000 x27: 0000000000000000
[ 0.751682] x26: 0000000001963d01 x25: ffff0000004f7d90 x24: 0000000000000000
[ 0.752264] x23: 0000000000000000 x22: ffff80008000bcc8 x21: 0000000000000011
[ 0.752836] x20: ffff80008000ba90 x19: 0000000001963d01 x18: 0000000000000000
[ 0.753407] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 0.753970] x14: ffffbf3154b9ae70 x13: 0000000000000000 x12: ffffbf3154b9ae70
[ 0.754548] x11: ffffffffffffffff x10: 0000000000000000 x9 : 0000000000000000
[ 0.755122] x8 : 000000000000000d x7 : 000000000000001f x6 : 0000000000000000
[ 0.755707] x5 : 0000000000000000 x4 : 0000000000000000 x3 : fffffdffc0000000
[ 0.756287] x2 : 0000000000000008 x1 : 0000000040000000 x0 : fffffdffbf000000
[ 0.756871] Call trace:
[ 0.757107] dax_disassociate_entry.constprop.0+0x20/0x50 (P)
[ 0.757592] dax_iomap_pte_fault+0x4fc/0x808
[ 0.757951] dax_iomap_fault+0x28/0x30
[ 0.758258] ext4_dax_huge_fault+0x80/0x2dc
[ 0.758594] ext4_dax_fault+0x10/0x3c
[ 0.758892] __do_fault+0x38/0x12c
[ 0.759175] __handle_mm_fault+0x530/0xcf0
[ 0.759518] handle_mm_fault+0xe4/0x230
[ 0.759833] do_page_fault+0x17c/0x4dc
[ 0.760144] do_translation_fault+0x30/0x38
[ 0.760483] do_mem_abort+0x40/0x8c
[ 0.760771] el0_ia+0x4c/0x170
[ 0.761032] el0t_64_sync_handler+0xd8/0xdc
[ 0.761371] el0t_64_sync+0x168/0x16c
[ 0.761677] Code: f9453021 f2dfbfe3 cb813080 8b001860 (f9400401)
[ 0.762168] ---[ end trace 0000000000000000 ]---
[ 0.762550] note: init[1] exited with irqs disabled
[ 0.762631] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: bcd2000: Fix race between rawmidi and disconnect
Although we tried to fix the potential UAF issues at USB disconnect on
bcd2000 driver, there is still an overlooked case -- namely, when a
rawmidi trigger callback has been already running at USB disconnect
handling, the in-flight function (e.g. bcd2000_midi_send()) could
still access the URB, because the previous URB NULL-check & clearance
was considered only for the URB complete callbacks, but not about the
parallel rawmidi operations.
For addressing the race, this patch introduced a new spinlock that
covers each rawmidi operation as well as the rawmidi handling in the
complete callback. The URB is cleared with the lock, so it guarantees
that the pending rawmidi task already finished or a NULL check is
effective. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate
dvfs_get_idx() may return an out-of-range index if the SCP firmware is
buggy or returns a stale value. Only negative indexes were rejected, so a
large index walked past info->opps and could treat garbage as a clock rate
(KASAN OOB / wrong frequency to consumers). The missing upper bound dates
back to the original SCPI clock driver.
Treat indexes >= opp count as invalid and return 0, same as idx < 0. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix stack OOB read in iptfs_skb_reset_frag_walk()
iptfs_skb_reset_frag_walk() advances to the fragment containing @offset
with an unbounded loop:
while (offset >= walk->past + walk->frags[walk->fragi].len)
walk->past += walk->frags[walk->fragi++].len;
walk->fragi is advanced and walk->frags[walk->fragi] is dereferenced
without ever checking fragi against walk->nr_frags. When the requested
offset is at or beyond the total length spanned by the walk's fragments,
fragi runs past nr_frags and off the end of the fixed-size on-stack
frags[MAX_SKB_FRAGS + 1] array, reading out-of-bounds stack memory.
The two callers behave differently: iptfs_skb_add_frags() already guards
against this with
if (!walk->nr_frags ||
offset >= walk->total + walk->initial_offset)
return len;
but iptfs_skb_can_add_frags() has no such guard and calls
iptfs_skb_reset_frag_walk() unconditionally, so it performs the
out-of-range walk. Its own "fragi < walk->nr_frags" bound check runs only
afterwards, too late to prevent the read.
This is reachable from the receive path: a crafted IP-TFS (AGGFRAG)
payload delivered to an IPTFS SA drives iptfs_reassem_cont() ->
iptfs_skb_can_add_frags() with an offset past the fragment total, e.g.:
BUG: KASAN: stack-out-of-bounds in iptfs_skb_reset_frag_walk+0x235/0x250
Read of size 4 at addr ffff888008ad7210 by task repro/345
iptfs_skb_reset_frag_walk+0x235/0x250 net/xfrm/xfrm_iptfs.c:392
iptfs_skb_can_add_frags+0x155/0x310 net/xfrm/xfrm_iptfs.c:420
iptfs_reassem_cont+0xcf8/0x1140 net/xfrm/xfrm_iptfs.c:902
iptfs_input_ordered+0x552/0x670 net/xfrm/xfrm_iptfs.c:1280
iptfs_input+0x3d6/0xde0 net/xfrm/xfrm_iptfs.c:1741
xfrm_input+0x282f/0x6140 net/xfrm/xfrm_input.c:700
xfrm4_esp_rcv+0x93/0x120 net/ipv4/xfrm4_protocol.c:104
ip_rcv+0x278/0x2d0 net/ipv4/ip_input.c:612
Give iptfs_skb_can_add_frags() the same up-front guard that
iptfs_skb_add_frags() already has, so the walk is never entered with an
out-of-range offset. When it triggers, the caller falls back to the
existing linearize-and-copy path, which is safe. |
| DigitalCanion has discovered a path traversal vulnerability that allows an attacker to access files outside of the intended directory.
The specific flaw exists within the Maintenance → System Logs functionality of the web management portal listening on TCP port 443. The application fails to properly validate user-supplied file paths, allowing an attacker to manipulate the requested path and traverse the underlying directory structure.
By exploiting this vulnerability, an attacker can access and download files located outside the intended system logs directory, including potentially sensitive system and application files. |
| Perforce P4 Search container images prior to 2026.4.2 enable an unauthenticated Java debug interface. An attacker with network access to this interface can execute arbitrary code as the P4 Search service account, potentially leading to compromise of the connected P4 Server. |
| DigitalCanion has discovered a stored Cross-Site Scripting (XSS) vulnerability that allows an authenticated malicious user to inject persistent JavaScript or HTML content into the web application.
The specific flaw exists within the web portal listening on TCP port 443, under Configuration → Domains, specifically in the “Description” field. The application fails to properly validate or sanitize user-supplied input before storing and subsequently rendering the field.
By injecting malicious JavaScript into the Description field, an attacker can modify the content and behavior of the affected page when it is viewed by other users. This could allow an attacker to alter the page's appearance, display attacker-controlled content, or construct convincing phishing scenarios within the application's trusted web context. |
| DigitalCanion has discovered a stored Cross-Site Scripting (XSS) vulnerability that allows an authenticated malicious user to inject persistent JavaScript or HTML content, resulting in a denial-of-service condition within the web application.
The specific flaw exists within the web portal listening on TCP port 443, under Configuration → Users → Users List. The vulnerability occurs in the “Microsoft Exchange mailbox” field, which fails to properly validate or sanitize user-supplied input before storing and rendering it.
By injecting malicious JavaScript into this field, an attacker can cause the payload to execute whenever the affected user properties are accessed. This can prevent access to the affected user properties and result in a denial-of-service condition within the application's user-management functionality. |
| Perforce P4 Search prior to 2026.4.2 does not restrict file paths written through its logging configuration interface. An attacker holding the service authentication token can write arbitrary files on the host, potentially leading to code execution as the P4 Search service account. |
| DigitalCanion SA has discovered a vulnerability that allows remote attackers to execute arbitrary code on affected installations of the product. Authentication may be required to exploit this vulnerability.
The specific flaw exists within the Configuration → Services → Music on Hold functionality of the web portal listening on TCP port 443. The application is intended to allow users to upload WAV audio files but fails to properly validate the uploaded file type. An attacker can exploit this behavior to upload a malicious shared object (.so) instead of a WAV file. When the uploaded file is subsequently processed by the affected component, attacker-controlled code is loaded and executed in the context of the affected process. This can result in remote code execution and potentially full compromise of the underlying Linux system. |
| Perforce P4 Search prior to 2026.4.2 trusts a client-supplied address when validating certain authentication requests. An attacker holding a stolen P4 Server ticket can bypass host-based ticket restrictions and trusted-address controls, gaining access to P4 Search as the ticket's owner. |
| Perforce P4 Search prior to 2026.4.2 does not validate file names supplied to its extension installation feature. An attacker with super-user or service-token privileges can write files with arbitrary content to the P4 Search installation directory. |
