Export limit exceeded: 401118 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (4289 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90331 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: asus: refactor the two workqueues and init sequence Multiple issues have been found within the hid-asus driver: - unchecked size in asus_raw_event() - unclean teardown of asus_probe on failure - possible use-after-free in asus_probe - multiple workqueue used for jobs where one was enough - sleeping calls in atomic context - packets of incorrect size being sent to the keyboard controller Join the two workqueues into one reusing the stopping mechanism of the brightness workqueue, use the joined workqueue to also move the asus_wmi_send_event() sleeping call away from atomic context and add a size check in asus_raw_event(). | ||||
| CVE-2026-90259 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data() In that function, we round down the start position and round up the ending position. But during the calculation of @len, we use "round_up(start + len, sectorsize)", which is the rounded up end position, not the rounded up length. Which results a much larger length, and later we are still using "start + len", which is completely incorrect. Fix it by declaring a local @aligned_start and @aligned_len and use them instead. | ||||
| CVE-2026-90246 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tagset table unpacked from a policy blob. For each set it reads a count and checks that advancing the index by that count stays inside sets.table[]: u32 cnt = tags->sets.table[i]; if (i+cnt >= tags->sets.size) { i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32. sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so every entry is a raw unbounded 32-bit word taken from the policy blob, and verify_tags() is the function that is supposed to validate it. A count close to U32_MAX makes the sum wrap to a small value, the guard passes, and the inner loop then walks sets.table[++i] past the end of the kcalloc(size, sizeof(u32)) allocation. Note that sets.size is bounded by 65535, because unpack_tagsets() reads it with aa_unpack_array() as a u16, so the wrap cannot be reached by growing the table; it is reached purely through the attacker-supplied count. With sets.size = 2 and sets.table = { 0, 0xffffffff }: i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is false, so the guard is bypassed and the inner loop reads sets.table[2] -- one element past a two element allocation The walk continues until an out-of-bounds value happens to be >= hdrs.size or the access faults, so a crafted policy yields an out-of-bounds read on the policy load path (aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags -> verify_tags). unpack_tags() runs before the perms and DFA tables are unpacked, so no other table needs to be well formed to reach it. Policy load is gated by aa_may_manage_policy(), which checks CAP_MAC_ADMIN relative to the subject's own user namespace rather than the init user namespace, so with the default unprivileged_userns_apparmor_policy=1 the path is reachable from an unprivileged task in a matched-level nested namespace, not only by a globally privileged one. Perform the addition in u64 so that it cannot wrap, restoring the intended i + cnt < sets.size guarantee. | ||||
| CVE-2026-90109 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: sched: fix 32-bit backlog wrap in gred, bfifo and plug enqueue gred_enqueue(), bfifo_enqueue() and plug_enqueue() admit a packet when the current backlog plus the packet length fits within the queue limit: sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (gred default VQ) gred_backlog+qdisc_pkt_len(skb) <= q->limit (gred configured VQ) sch->qstats.backlog + qdisc_pkt_len(skb) <= sch->limit (bfifo) sch->qstats.backlog + skb->len <= q->limit (plug) sch->qstats.backlog and q->backlog are u32, and qdisc_pkt_len()/skb->len are unsigned int, so all sums are computed in 32 bits and wrap at 2^32. Once the true backlog exceeds 4 GiB the wrapped sum becomes small and admission keeps succeeding, so the queue grows without bound and the kernel can be driven to OOM. Promote the sums to u64 so admission stops once the true backlog exceeds the limit. The limit is u32, so the bounded queue stays below 2^32 and the stored u32 backlog never wraps. The bug can only be reproduced as root (albeit with ridiculous setup): attach a gred (or bfifo/plug) qdisc with a limit near 4 GiB, leaving the default VQ unconfigured (for gred), and drive >4 GiB of queued traffic (e.g. via a size table / stab to inflate qdisc_pkt_len, or sustained high-rate traffic). The u32 backlog+len sum wraps at 2^32, admission keeps succeeding, and the queue grows unboundedly to OOM. | ||||
| CVE-2026-11725 | 1 Ibm | 1 Mq | 2026-09-18 | 8.8 High |
| IBM MQ could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code due to an integer overflow in MQINQ request processing. | ||||
| CVE-2026-56711 | 1 Videolan | 1 Vlc Media Player | 2026-09-18 | 7 High |
| VLC media player versions 3.0.0 through 3.0.23 contain a memory-safety vulnerability reachable when processing crafted media. Exploitation requires user interaction and may result in application termination or code execution with the privileges of the VLC process. | ||||
| CVE-2025-6021 | 2 Redhat, Xmlsoft | 30 Discovery, Enterprise Linux, Enterprise Linux Eus and 27 more | 2026-09-18 | 7.5 High |
| A flaw was found in libxml2's xmlBuildQName function, where integer overflows in buffer size calculations can lead to a stack-based buffer overflow. This issue can result in memory corruption or a denial of service when processing crafted input. | ||||
| CVE-2026-46655 | 1 Virtio-win | 1 Kvm-guest-drivers-windows | 2026-09-18 | 7.8 High |
| virtio-win provides Windows paravirtualized drivers for QEMU and KVM. From mm210 until mm320, the Viosock driver permits a low-privilege local process to submit an IOCTL_SELECT request with attacker-controlled VIRTIO_VSOCK_SELECT.Fdss[*].fd_count values that overflow the 32-bit sum used by VIOSockSelect for bounds checking. The wrapped sum can pass the FD_SETSIZE check even though an individual descriptor count is much larger than the expected limit. VIOSockSelectCopyFds then iterates using the unchecked count and writes beyond the allocated pPkt->Fds array in the NonPagedPool kernel heap. Successful exploitation can corrupt kernel memory and enable privilege escalation in a Windows guest running the driver. This issue is fixed in mm320. | ||||
| CVE-2023-4734 | 3 Apple, Neovim, Vim | 3 Macos, Neovim, Vim | 2026-09-18 | 7.8 High |
| Integer Overflow or Wraparound in GitHub repository vim/vim prior to 9.0.1846. | ||||
| CVE-2026-92259 | 1 Samsung Open Source | 1 Escargot | 2026-09-18 | 5.5 Medium |
| Integer overflow or wraparound vulnerability in Samsung Opensource Escargot allows attackers with write access to the bytecode-cache directory to cause a heap-based buffer overflow and denial of service via a crafted cache file. This issue affects Escargot: ac94df78493ee6fede286620d94f724e46b4d238. | ||||
| CVE-2026-91728 | 1 Google | 1 Chrome | 2026-09-18 | 9.6 Critical |
| Integer overflow in V8 in Google Chrome prior to 153.0.8010.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-89775 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation Computing the effects of a TLB invalidation involves looking at the size of the mapping cached by the TLB. For S1 mappings such as VNCR, this is deducted from the combination of the base granule size and the mapping level. However, this implies that the S1 MMU is *on*. When the MMU is off, we indicate this with the level being set to a "creative" value of -127 (S1_MMU_DISABLED). This ends-up being misinterpreted by pgshift_level_to_ttl() as it doesn't handle negative levels at all (the level is immediately cast to a u8 and only the bottom two bits considered), leading to an invalidation size of 0. Not helpful. Tidy-up pgshift_level_to_ttl() to handle these negative levels, and ttl_to_size() to always return SZ_1G when no valid TTL is present. This allows the removal of open-coded checks for similar situations. Note that the check for a negative value not explicitely checking for S1_MMU_DISABLED is deliberate, so that actual negative levels introduced with LVA2 and D128 can take the same path if we ever support them. | ||||
| CVE-2026-89856 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel. Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn underflow max_qpairs). | ||||
| CVE-2026-89825 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: fix firmware control interface bounds checks panthor_init_cs_iface() and panthor_init_csg_iface() validate firmware control interface offsets with 32-bit arithmetic and the size of the host wrapper structures. The offsets are derived from firmware-provided strides, so the arithmetic can wrap before the bounds check, and the host wrapper size is not the size of the firmware control interface being mapped. Use 64-bit arithmetic for the computed offsets and validate against the actual firmware control interface structure sizes with subtraction-based bounds checks. Also validate that the shared section is large enough for the global control interface before using it. | ||||
| CVE-2026-89826 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: harden firmware build-info bounds checks panthor_fw_read_build_info() checks whether the metadata range fits in the firmware image with hdr.meta_start + hdr.meta_size. Both fields are u32, so the addition can wrap and let an out-of-bounds range pass validation. The function also reads the "git_sha: " prefix without first checking that the metadata is long enough, and meta_size == 0 can underflow the NULL terminator index. Use subtraction-based bounds checking and reject metadata that is too short to contain the expected prefix and trailing NULL byte. | ||||
| CVE-2026-89911 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly cap TLBI Range to the architural limit TLB Invalidation by Range has a fairly powerful way of encoding pretty large ranges in a small number of bits. This range can be based on an arbitrary VA, which means it is pretty easy for a guest to generate an overflow should the hypervisor be naive enough to add the range to the base... Make sure the range is capped to the limit dictated by the address bit that determines the VA range. For an IPA invalidation, this is further corrected down the line to ignore the upper range. | ||||
| CVE-2026-89926 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix length check __import_wp_info() struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user space. This is then assigned to wp_info->len, which is an int. The bounds check is done on the truncated value while the allocation uses the untruncated one: wp_info->len = bp_data->len; [...] if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE) return -EINVAL; wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT); Use the validated value for the allocation as intended. Without this fix userspace can trigger >4GB allocations which will fail and result in a WARN due to MAX_PAGE_ORDER. | ||||
| CVE-2026-89927 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock Fix an issue where userspace or the guest can program an Hyper-V synthetic timer to have a deadline in the past via integer overflow, preventing the CPU from making progress and triggering an RCU stall. Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the guest, which are emulated by KVM. Each is programmed through the HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending on CONFIG, COUNT represents either the absolute expiration time or the period of a periodic timer, both expressed in 100ns ticks. These timers may be set both by the guest (WRMSR) and the host (KVM_SET_MSRS). When the timer is enabled, stimer_start() translates COUNT to an absolute monotonic deadline and arms an hrtimer. If COUNT is set to a value close to U64_MAX, the deadline calculation can overflow. ktime_add_ns(ktime_now, 100 * (stimer->exp_time - time_now)) This can result in a CPU livelock. stimer_start() arms the timer via hrtimer_start() with a deadline in the past, which causes it to immediately fire. The stimer callback then raises KVM_RQ_HV_STIMER, with the intention of causing KVM to deliver a synthetic interrupt on the next vCPU guest enter. Then, once userspace issues KVM_RUN, vcpu_enter_guest() consumes the request, calling kvm_hv_process_stimers(). This would normally disable the timer via stimer_expiration() once the deadline is in the past. However, the deadline comparison is done between the KVM reference counter and stime->exp_time, which is a big value close to U64_MAX, so this never happens for a few thousand years. kvm_hv_process_timers() then re-arms the timer via stimer_start(), since it was not disabled, which again fires immediately. Before entering the guest, kvm_vcpu_exit_request() checks kvm_request_pending(), which returns true due to the newly raised KVM_REQ_HV_STIMER. Then vcpu_enter_guest() aborts the guest entry, returning early into vcpu_run(), which loops back again into vcpu_enter_guest(), restarting the cycle. Since there are no manual yields in this loop, a task with SCHED_FIFO may starve RCU grace-period kthreads, which exposes the stalls found by syzcaller: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: (detected by 1, t=10502 jiffies, g=14269, q=1142 ncpus=2) rcu: All QSes seen, last rcu_preempt kthread activity 10500 (4294965239-4294954739), jiffies_till_next_fqs=1, root ->qsmask 0x0 rcu: rcu_preempt kthread starved for 10500 jiffies! g14269 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. ( ... ) Call Trace: <IRQ> __run_hrtimer kernel/time/hrtimer.c:1773 [inline] __hrtimer_run_queues+0x408/0xc30 kernel/time/hrtimer.c:1841 hrtimer_interrupt+0x45b/0xaa0 kernel/time/hrtimer.c:1903 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1045 [inline] __sysvec_apic_timer_interrupt+0x102/0x3e0 arch/x86/kernel/apic/apic.c:1062 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1056 [inline] sysvec_apic_timer_interrupt+0xa1/0xc0 arch/x86/kernel/apic/apic.c:1056 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:697 RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0xa8/0x110 kernel/locking/spinlock.c:194 Code: 74 05 e8 0b f4 5f f6 48 c7 44 24 20 00 00 00 00 9c 8f 44 24 20 f6 44 24 21 02 75 4f f7 c3 00 02 00 00 74 01 fb bf 01 00 00 00 <e8> 23 6b 27 f6 65 8b 05 7c 60 5a 07 85 c0 74 40 48 c7 04 24 0e 36 RSP: 0018:ffffc900040a7320 EFLAGS: 00000206 RAX: 5de15cb931505900 RBX: 0000000000000a06 RCX: 5de15cb931505900 RDX: 0000000000000007 RSI: ffffffff8daa9dc3 RDI: 0000000000000001 RBP: ffffc900040a73b0 R08: ffffffff8fc3d0 ---truncated--- | ||||
| CVE-2026-63126 | 1 Square | 1 Wire | 2026-09-18 | 7.5 High |
| Wire provides gRPC and protocol buffers for Android, Kotlin, Swift, and Java. Prior to 6.4.5 and 7.0.0-alpha04, Wire protobuf readers do not consistently validate attacker-controlled lengths against the current logical message boundary before advancing cursors, pointers, limits, slices, or allocations. In Kotlin, ProtoAdapter.decode(ByteArray) and ProtoAdapter.decode(ByteString) use ByteArrayProtoReader32.internalNextLengthDelimited(), where a positive oversized length can wrap pos + length to a negative limit and escape the existing negative-length check. Related ProtoReader, ReadBuffer.readVarint(), ReadBuffer.verifyAdditional(count:), packed-repeated, nested-message, and ProtoDecoder.decodeSizeDelimited(_:from:) paths can cross logical boundaries, perform pointer arithmetic, reserve capacity, or convert an unrepresentable size before proving the requested bytes exist. An attacker who supplies malformed protobuf bytes can cause unchecked exceptions, traps, out-of-bounds behavior, or excessive allocation, resulting in denial of service without known confidentiality, integrity, or code-execution impact. This issue is fixed in versions 6.4.5 and 7.0.0-alpha04. | ||||
| CVE-2026-89918 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Correctly handle end of VA space TLBI invalidation Our TLB invalidation by VA code is based on comparing two ranges, one defined by the TLB, and one defined by the TLBI instruction. Each range is defined by a start and a size. However, the way the comparison is done doesn't account for address rollover, as it compares an address with (base + size). This works nicely until this expression represent the last page/block in the TTBR1 VA space, as the result is a big fat 0. And a failed TLB invalidation. Rewrite the comparison in a way that is immune to the address rollover (making the end address inclusive instead of exclusive), and move this into a common helper that is used by both VA and IPA invalidations, as suggested by Hyunwoo Kim (although the IPA version didn't suffer from this particular problem, obviously). | ||||