| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Stack-based Buffer Overflow vulnerability in ABB RMC-100, ABB RMC-100 LITE.
When the REST interface is enabled by the user, and an attacker gains access to
the control network, and user/password broker authentication is enabled, and
CVE-2025-6074 is exploited, the attacker can overflow the buffer for username or
password.
This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| Description
In Spring Framework, versions 6.0.x as of 6.0.5, versions 6.1.x and 6.2.x, an application is vulnerable to a reflected file download (RFD) attack when it sets a “Content-Disposition” header with a non-ASCII charset, where the filename attribute is derived from user-supplied input.
Specifically, an application is vulnerable when all the following are true:
* The header is prepared with org.springframework.http.ContentDisposition.
* The filename is set via ContentDisposition.Builder#filename(String, Charset).
* The value for the filename is derived from user-supplied input.
* The application does not sanitize the user-supplied input.
* The downloaded content of the response is injected with malicious commands by the attacker (see RFD paper reference for details).
An application is not vulnerable if any of the following is true:
* The application does not set a “Content-Disposition” response header.
* The header is not prepared with org.springframework.http.ContentDisposition.
* The filename is set via one of: * ContentDisposition.Builder#filename(String), or
* ContentDisposition.Builder#filename(String, ASCII)
* The filename is not derived from user-supplied input.
* The filename is derived from user-supplied input but sanitized by the application.
* The attacker cannot inject malicious content in the downloaded content of the response.
Affected Spring Products and VersionsSpring Framework:
* 6.2.0 - 6.2.7
* 6.1.0 - 6.1.20
* 6.0.5 - 6.0.28
* Older, unsupported versions are not affected
MitigationUsers of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability6.2.x6.2.8OSS6.1.x6.1.21OSS6.0.x6.0.29 Commercial https://enterprise.spring.io/ No further mitigation steps are necessary.
CWE-113 in `Content-Disposition` handling in VMware Spring Framework versions 6.0.5 to 6.2.7 allows remote attackers to launch Reflected File Download (RFD) attacks via unsanitized user input in `ContentDisposition.Builder#filename(String, Charset)` with non-ASCII charsets. |
| A vulnerability exists in the media upload component of the Asset
Suite versions listed below. If successfully exploited an attacker
could impact the confidentiality or integrity of the system. An attacker can use this vulnerability to construct a request that will
cause JavaScript code supplied by the attacker to execute within
the user’s browser in the context of that user’s session with the
application. |
| Rollbar.js offers error tracking and logging from Javascript to Rollbar. In versions before 2.26.5 and from 3.0.0-alpha1 to before 3.0.0-beta5, there is a prototype pollution vulnerability in merge(). If application code calls rollbar.configure() with untrusted input, prototype pollution is possible. This issue has been fixed in versions 2.26.5 and 3.0.0-beta5. A workaround involves ensuring that values passed to rollbar.configure() do not contain untrusted input. |
| Vulnerabilities* in ActADUR local server product, developed and maintained by ProTNS, allows Remote Code Inclusion on host systems.
* vulnerabilities:
*
Improper Neutralization of Special Elements used in a Command ('Command Injection')
* Use of Hard-coded Credentials
* Improper Authentication
* Binding to an Unrestricted IP Address
The vulnerability has been rated as critical.This issue affects ActADUR: from v2.0.1.9 before v2.0.2.0., hence updating to version v2.0.2.0. or above is required. |
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833 and classified as problematic. This issue affects the function hashmap_set_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier of the patch is ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. |
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833. It has been classified as problematic. This affects the function hashmap_get_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The patch is named ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. |
| Stack-based Buffer Overflow vulnerability in ABB RMC-100, ABB RMC-100 LITE.
When the REST interface is enabled by the user, and an attacker gains access to
the control network, and CVE-2025-6074 is exploited, the attacker can use the
JSON configuration to overflow the date of expiration field.This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| Claude Code is an agentic coding tool. Claude Code extensions in VSCode and forks (e.g., Cursor, Windsurf, and VSCodium) and JetBrains IDEs (e.g., IntelliJ, Pycharm, and Android Studio) are vulnerable to unauthorized websocket connections from an attacker when visiting attacker-controlled webpages. Claude Code for VSCode IDE extensions versions 0.2.116 through 1.0.23 are vulnerable. For Jetbrains IDE plugins, Claude Code [beta] versions 0.1.1 through 0.1.8 are vulnerable. In VSCode (and forks), exploitation would allow an attacker to read arbitrary files, see the list of files open in the IDE, get selection and diagnostics events from the IDE, or execute code in limited situations where a user has an open Jupyter Notebook and accepts a malicious prompt. In JetBrains IDEs, an attacker could get selection events, a list of open files, and a list of syntax errors. Claude released a patch for this issue on June 13th, 2025. Although Claude Code auto-updates when a user launch it and auto-updates the extensions, users should take the following steps, though the exact steps depend on one's integrated development environment (IDE). For VSCode, Cursor, Windsurf, VSCodium, and other VSCode forks, check the extension Claude Code for VSCode. Open the list of Extensions (View->Extensions), look for Claude Code for VSCode among installed extensions, update or uninstall any version prior to 1.0.24, and restart the IDE. For JetBrains IDEs including IntelliJ, PyCharm, and Android Studio, check the plugin Claude Code [Beta]. Open the Plugins list, look for Claude Code [Beta] among installed extensions, update or uninstall any version prior to 0.1.9, and restart the IDE. |
| The specific flaw exists within the Bluetooth stack developed by Alps Alpine of the Infotainment ECU manufactured by Bosch. The issue results from the lack of proper boundary validation of user-supplied data, which can result in a stack-based buffer overflow when receiving a specific packet on the established upper layer L2CAP channel. An attacker can leverage this vulnerability to obtain remote code execution on the Infotainment ECU with root privileges.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| In versions before 20.0.2, it was found that --disallow-code-generation-from-strings is not sufficient for isolating untrusted JavaScript in happy-dom. The untrusted script and the rest of the application still run in the same Isolate/process, so attackers can deploy prototype pollution payloads to hijack important references like "process" in the example below, or to hijack control flow via flipping checks of undefined property. This vulnerability is due to an incomplete fix for CVE-2025-61927. The vulnerability is fixed in 20.0.2. |
| wire-ios is an iOS client for the Wire secure messaging application. From Wire iOS 3.111.1 to before 3.124.1, messages that were visible in the view port have been logged to the iOS system logs in clear text. Wire application logs created and managed by the application itself were not affected, especially not the logs users can export and send to Wire support. The iOS logs can only be accessed if someone had (physical) access to the underlying unlocked device. The issue manifested itself by calling canOpenUrl() and passing an invalid URL object. When iOS then performs the check and fails, it logs the contents to the system log. This is not documented behaviour. Wire released an emergency fix with version 3.124.1. As a workaround, users can reset their iOS device to remove the offending logs. Since Wire cannot access or modify iOS system logs, there's no other workaround other than a reset. |
| A local attacker could cause a full device reset by resetting the device passwords using an invalid reset file via USB. |
| The initial code parsing the manifest did not check the content of the file names yet later code assumed that it was checked and panicked when encountering illegal characters, resulting in a crash of Routinator. |
| Valve's Source SDK (source-sdk-2013)'s ragdoll model parsing logic contains a stack-based buffer overflow vulnerability.The tokenizer function `nexttoken` copies characters from an input string into a fixed-size stack buffer without performing bounds checks. When `ParseKeyValue` processes a collisionpair rule longer than the destination buffer (256 bytes), an overflow of the stack buffer `szToken` can occur and overwrite the function return address. A remote attacker can trigger the vulnerable code by supplying a specially crafted ragdoll model which causes the oversized collisionpair rule to be parsed, resulting in remote code execution on affected clients or servers. Valve has addressed this issue in many of their Source games, but independently-developed games must manually apply patch. |
| DBLTek GoIP devices (models GoIP 1, 4, 8, 16, and 32) contain an undocumented vendor backdoor in the Telnet administrative interface that allows remote authentication as an undocumented user via a proprietary challenge–response scheme which is fundamentally flawed. Because the challenge response can be computed from the challenge itself, a remote attacker can authenticate without knowledge of a secret and obtain a root shell on the device. This can lead to persistent remote code execution, full device compromise, and arbitrary control of the device and any managed services. The firmware used within these devices was updated in December 2016 to make this vulnerability more complex to exploit. However, it is unknown if DBLTek has taken steps to fully mitigate. |
| Some Microsoft technologies as used in Windows 8 through 11 allow a temporary client-side performance degradation during processing of multiple Unicode combining characters, aka a "Zalgo text" attack. NOTE: third parties dispute whether the computational cost of interpreting Unicode data should be considered a vulnerability. |
| The NtfsHandler.cpp NTFS handler in 7-Zip before 24.01 (for 7zz) contains an out-of-bounds read that allows an attacker to read beyond the intended buffer. The bytes read beyond the intended buffer are presented as a part of a filename listed in the file system image. This has security relevance in some known web-service use cases where untrusted users can upload files and have them extracted by a server-side 7-Zip process. |
| CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that
could allow an unauthorized attacker to modify configuration values outside of the normal range when the
attacker sends specific Modbus write packets to the device which could result in invalid data or loss of web
interface functionality. |
| CGI::Simple versions before 1.282 for Perl has a HTTP response splitting flaw
This vulnerability is a confirmed HTTP response splitting flaw in CGI::Simple that allows HTTP response header injection, which can be used for reflected XSS or open redirect under certain conditions.
Although some validation exists, it can be bypassed using URL-encoded values, allowing an attacker to inject untrusted content into the response via query parameters.
As a result, an attacker can inject a line break (e.g. %0A) into the parameter value, causing the server to split the HTTP response and inject arbitrary headers or even an HTML/JavaScript body, leading to reflected cross-site scripting (XSS), open redirect or other attacks.
The issue documented in CVE-2010-4410 https://www.cve.org/CVERecord?id=CVE-2010-4410 is related but the fix was incomplete.
Impact
By injecting %0A (newline) into a query string parameter, an attacker can:
* Break the current HTTP header
* Inject a new header or entire body
* Deliver a script payload that is reflected in the server’s response
That can lead to the following attacks:
* reflected XSS
* open redirect
* cache poisoning
* header manipulation |
