| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, the Avro array and map decoders looped over an attacker-controlled block-count value without checking the underlying reader's error state inside the loop body. Reader.ReadBlockHeader returns the count as a Go int, which is 64-bit on amd64 / arm64 targets — so a producer can declare a block of up to math.MaxInt64 (~9.2 × 10¹⁸) elements followed by EOF (or any truncated payload), and the decoder will attempt that many no-op iterations before propagating the error. The realistic ceiling is "indefinite until the worker is killed externally" — a single hostile payload pins a CPU core until the process is OOM-killed, deadline-cancelled, or terminated. Remote, unauthenticated denial-of-service. This vulnerability is fixed in 2.33.0. |
| iskorotkov/avro is a fast Go Avro codec. Prior to 2.33.0, several Avro decoder paths read attacker-controlled 64-bit values from the wire format and either narrowed them to platform-sized int before bounds-checking, or summed them with overflow-prone signed-int arithmetic. On 32-bit targets (GOARCH=386, arm, mips, wasm, etc.), the truncation paths can silently bypass byte-slice limits, select the wrong union branch, or hit the OCF negative-make panic via wrap. Three sub-issues are not 32-bit-specific: cumulative-size arithmetic overflow in arrayDecoder.Decode / mapDecoder.Decode / mapDecoderUnmarshaler.Decode (wraps at math.MaxInt64 on amd64 / arm64 and bypasses MaxSliceAllocSize / MaxMapAllocSize), math.MinInt negation in block-header handling, and make([]byte, size) with a negative size in OCF block reads — all three panic or bypass caps on any platform, giving an attacker a denial-of-service primitive there. This vulnerability is fixed in 2.33.0. |
| urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0. |
| Missing critical step in authentication in Apache HttpClient 5.6 allows an attacker to cause the client to accept SCRAM-SHA-256 authentication without proper mutual authentication verification. Users are recommended to upgrade to version 5.6.1, which fixes this issue. |
| In Eclipse Jetty, the HTTP/1.1 parser is vulnerable to request smuggling when chunk extensions are used, similar to the "funky chunks" techniques outlined here:
* https://w4ke.info/2025/06/18/funky-chunks.html
* https://w4ke.info/2025/10/29/funky-chunks-2.html
Jetty terminates chunk extension parsing at \r\n inside quoted strings instead of treating this as an error.
POST / HTTP/1.1
Host: localhost
Transfer-Encoding: chunked
1;ext="val
X
0
GET /smuggled HTTP/1.1
...
Note how the chunk extension does not close the double quotes, and it is able to inject a smuggled request. |
| SWIG file names containing 'cgo' and well-crafted payloads could lead to code smuggling and arbitrary code execution at build time due to trust layer bypass. |
| In Eclipse Jetty, versions 12.0.0-12.0.31 and 12.1.0-12.0.5, class GzipHandler exposes a vulnerability when a compressed HTTP request, with Content-Encoding: gzip, is processed and the corresponding response is not compressed.
This happens because the JDK Inflater is allocated for decompressing the request, but it is not released because the release mechanism is tied to the compressed response.
In this case, since the response is not compressed, the release mechanism does not trigger, causing the leak. |
| extract-zip through 2.0.1 containment-checks only the parent directory of each archive entry and never the entry's own final path component, so an archive containing two entries with identical names - a symlink whose target is outside the destination, followed by a regular file - writes through the planted symlink and yields an arbitrary file write outside the destination directory. |
| Use after free in WebRTC in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper input validation in Media in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Race condition in FileSystem in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Buffer overflow in ANGLE in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper input validation in Media in Google Chrome on on Windows prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Out of bounds write in ANGLE in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Uncontrolled Resource Consumption vulnerability in Apache Tomcat via an allocation leak in the HTTP/2 backlog tracking when a stream is reset
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.39 through 9.0.120.
The following versions were EOL at the time the CVE was created but are
known to be affected: from 8.5.59 through 8.5.100. Other unsupported versions may also be affected.
Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue. |
| Improper input validation in Input in Google Chrome on on Android prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Free all memory if cp_init() fails
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: fix TX DMA buffer flush
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Remove buffer from list prior to unmap operation
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: fix huge_zero_pfn race
Patch series "mm/huge_memory: fix huge_zero_pfn race", v2.
There is a subtle race in the reference-counted huge_zero_folio
implementation.
The fast path atomic logic fails to account for the fact that the shrinker
(which drops the final huge_zero_refcount pin) can overwrite huge_zero_pfn
with the ~0UL sentinel value in shrink_huge_zero_folio_scan() after a
racing get_huge_zero_folio() installed a valid value there.
This results in huge_zero_folio being correctly set but huge_zero_pfn
being set incorrectly and thus is_huge_zero_pfn() and consequently
is_huge_zero_pmd() will misidentify the huge zero folio as being an
ordinary THP folio.
This can result in the huge zero folio being split and otherwise treated
incorrectly.
The solution to this is very subtle as there is an atomic fast path, and
thus ordering in weakly ordered architectures has to be treated very
carefully.
The first commit fixes the issue by introducing a spinlock around
huge_zero_[pfn, folio, refcount] write, with careful consideration paid to
load/store ordering in the fast path. It is placed first and kept as
small as possible so that it can be backported on its own.
The second commit is a pure cleanup which reworks the
CONFIG_PERSISTENT_HUGE_ZERO_FOLIO logic to better separate the persistent
logic from the dynamically allocated one.
This patch (of 2):
If !CONFIG_PERSISTENT_HUGE_ZERO_FOLIO, the huge_zero_folio is refcounted
by huge_zero_refcount and returned by mm_get_huge_zero_folio().
When the caller is done with the huge zero page, its reference count is
decremented. Only a shrinker can set the reference count to zero.
A race can unfortunately occur between a shrinker decrementing the
reference count to zero and a concurrent page fault.
This is because shrink_huge_zero_folio_scan() might, if very unlucky, be
preempted between setting huge_zero_refcount to zero and writing an
invalid value.
During this time get_huge_zero_folio() could write to huge_zero_pfn before
shrink_huge_zero_folio_scan() resumes.
In this event the huge zero folio will be persistently misidentified
causing the THP code path to be entered inappropriately for the huge zero
folio:
CPU 0 CPU 1
=======================================|=================================
shrink_huge_zero_folio_scan() |
atomic_cmpxchg() sets refcount to 0 |
xchg() sets huge_zero_folio to NULL | get_huge_zero_folio()
| | atomic_inc_not_zero() -> zero
preempted for a long time | Allocate new huge zero folio
| | Write valid huge_zero_folio
v | Write valid huge_zero_pfn
Overwrite huge_zero_pfn with ~0UL <--- Invalid overwrite!
This results in is_huge_zero_pfn() and is_huge_zero_pmd() incorrectly
returning false for a huge zero page which could result in issues like the
huge zero folio being incorrectly split.
Note that the issue is with huge_zero_pfn not huge_zero_folio, as
get_huge_zero_folio() uses cmpxchg() gated on huge_zero_folio being NULL
with a retry loop and shrink_huge_zero_folio_scan() uses xchg() to set
huge_zero_folio.
Fix the issue by introducing a spinlock, huge_zero_lock, to prevent
concurrent write of huge_zero_folio, huge_zero_pfn and huge_zero_refcount.
There needs to be significant care taken here to ensure correctness:
The fast path in get_huge_zero_folio() uses atomic_inc_not_zero(), which
is outside of the critical section, and means huge zero allocation is
gated on zero huge_zero_refcount.
The fast path doesn't use huge_zero_lock, so the critical section is
irrelevant to it.
So invariants are required - huge_zero_refcount MUST:
* Only be set in the huge_zero_lock critical section to ensure
serialisation of huge_zero_pfn, huge_zero_folio and
---truncated--- |
