| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: hand off the pinned file reference to accept_doit
handshake_req_next() removes the request from the per-net
pending list and drops hn_lock before handshake_nl_accept_doit()
reads req->hr_sk->sk_socket and dereferences sock->file (once in
FD_PREPARE() and again in get_file()). In that window a
consumer running tls_handshake_cancel() followed by sockfd_put()
(svc_sock_free) or __fput_sync() (xs_reset_transport) releases
sock->file. sock_release() then runs sock_orphan(), zeroing
sk_socket, and frees the struct socket. The accept-side code
either reads NULL through sk_socket or chases freed memory.
The submit-side sock_hold() does not prevent this. sk_refcnt
protects struct sock, but struct socket and sock->file are
independently refcounted via the file descriptor the consumer
owns. Pinning sk leaves sock and sock->file unprotected.
Retarget the accept-side dereferences at req->hr_file, which was
pinned at submit time, instead of req->hr_sk->sk_socket->file.
Pinning on its own is not sufficient: a consumer that cancels
between handshake_req_next() returning and accept_doit reaching
FD_PREPARE() takes the !remove_pending() branch in
handshake_req_cancel() and drops hr_file before the accept side
takes its own reference. Hand off an additional file reference
inside handshake_req_next(), under hn_lock, so the accept side
operates on a reference that no concurrent handshake_req_cancel()
can revoke. FD_PREPARE() consumes that handed-off reference,
either by transferring it to the new fd in fd_publish() or by
dropping it in the cleanup destructor on error; the explicit
get_file() that previously balanced FD_PREPARE() is therefore
redundant and goes away.
Update handshake_req_cancel_test2 and _test3 to simulate the
FD_PREPARE() consumption with an fput() so the kunit file-count
assertions stay balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit()
The transmit loop in airoha_dev_xmit() reads fragment address and length
during its final iteration, when the loop index equals
skb_shinfo(skb)->nr_frags, at which point the fragment data is
uninitialized. While these values are never consumed, the read itself is
unsafe and may trigger a page fault. Fix this by avoiding the fragment
read on the last iteration.
Additionally, move the skb pointer from the first to the last used packet
descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb
until the final descriptor is processed. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: read COW data with the original inode during atomic write
When updating an atomic-write file, f2fs_write_begin() may read the
previously written data back from the COW inode:
prepare_atomic_write_begin() locates the block in the COW inode and sets
use_cow, and the read bio is then built with the COW inode:
f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode,
...);
and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption
(STEP_DECRYPT) for the bio based on that inode via
fscrypt_inode_uses_fs_layer_crypto().
However, the folio being filled belongs to the original inode
(folio->mapping->host == inode), and the data stored in the COW block was
encrypted (or left as plaintext) using the original inode's context, not
the COW inode's -- see f2fs_encrypt_one_page(), which keys off
fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise
operates on folio->mapping->host.
The COW inode is created as a tmpfile in the parent directory and inherits
its encryption policy from there. With test_dummy_encryption the newly
created COW inode gets the dummy policy and becomes encrypted, while a
pre-existing regular file -- created before the policy applied, e.g.
already present in the on-disk image -- stays unencrypted. The read
path then sets STEP_DECRYPT based on the encrypted COW inode and calls
fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted
original inode) has a NULL ->i_crypt_info, dereferencing it:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310
Workqueue: f2fs_post_read_wq f2fs_post_read_work
Call Trace:
fscrypt_decrypt_bio+0x1eb/0x340
f2fs_post_read_work+0xba/0x140
process_one_work+0x91c/0x1a40
worker_thread+0x677/0xe90
kthread+0x2bc/0x3a0
The COW inode is only needed to locate the on-disk block, and that block
address is already resolved into @blkaddr by prepare_atomic_write_begin()
via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads
from that physical @blkaddr directly, so the inode argument only selects
the post-read crypto context, not which block is fetched. Reading with
@inode therefore returns the same (latest, not-yet-committed) COW data,
while making both the fs-layer decryption decision and the inline crypto
path use the correct (original inode's) key.
With the COW inode no longer used at the read site, the use_cow flag has no
remaining consumer; drop it from f2fs_write_begin() and
prepare_atomic_write_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: rockchip: fix generic IRQ chip leak on remove
The driver allocates domain generic chips using
irq_alloc_domain_generic_chips() during probe. However, on driver
remove/teardown, the generic chips are not automatically freed when the
IRQ domain is removed because the domain flags do not include
IRQ_DOMAIN_FLAG_DESTROY_GC.
This causes both the domain generic chips structure and the associated
generic chips to be leaked. Additionally, the generic chips remain on
the global gc_list and may later be visited by generic IRQ chip suspend,
resume, or shutdown callbacks after the GPIO bank has been removed,
potentially resulting in a use-after-free and kernel crash.
Fix the resource leak by explicitly calling
irq_domain_remove_generic_chips() before removing the IRQ domain in
rockchip_gpio_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix buffer over-read in rtw_update_protection
rtw_update_protection() is called with a pointer offset into the
ies buffer but the full ie_length is passed, causing a potential
buffer over-read. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: fsl-mc: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pull headers in qdisc_pkt_len_segs_init()
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix BQL imbalance in TX path
Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight
packets are accounted only for the AIROHA_NUM_TX_RING netdev TX
queues. The queue index is computed as:
qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx)
txq = netdev_get_tx_queue(dev, qid);
However, airoha_qdma_tx_napi_poll() accounts completions across all
netdev TX queues (num_tx_queues), leading to inconsistent BQL
accounting.
Also reset all netdev TX queues in the ndo_stop callback. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE
The current implementation incorrectly handles memory regions (MRs) with
page sizes different from the system PAGE_SIZE. The core issue is that
rxe_set_page() is called with mr->page_size step increments, but the
page_list stores individual struct page pointers, each representing
PAGE_SIZE of memory.
ib_sg_to_page() has ensured that when i>=1 either
a) SG[i-1].dma_end and SG[i].dma_addr are contiguous
or
b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned.
This leads to incorrect iova-to-va conversion in scenarios:
1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K):
ibmr->iova = 0x181800
sg[0]: dma_addr=0x181800, len=0x800
sg[1]: dma_addr=0x173000, len=0x1000
Access iova = 0x181800 + 0x810 = 0x182010
Expected VA: 0x173010 (second SG, offset 0x10)
Before fix:
- index = (0x182010 >> 12) - (0x181800 >> 12) = 1
- page_offset = 0x182010 & 0xFFF = 0x10
- xarray[1] stores system page base 0x170000
- Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong)
2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K):
ibmr->iova = 0x18f800
sg[0]: dma_addr=0x18f800, len=0x800
sg[1]: dma_addr=0x170000, len=0x1000
Access iova = 0x18f800 + 0x810 = 0x190010
Expected VA: 0x170010 (second SG, offset 0x10)
Before fix:
- index = (0x190010 >> 16) - (0x18f800 >> 16) = 1
- page_offset = 0x190010 & 0xFFFF = 0x10
- xarray[1] stores system page for dma_addr 0x170000
- Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong)
Yi Zhang reported a kernel panic[1] years ago related to this defect.
Solution:
1. Replace xarray with pre-allocated rxe_mr_page array for sequential
indexing (all MR page indices are contiguous)
2. Each rxe_mr_page stores both struct page* and offset within the
system page
3. Handle MR page_size != PAGE_SIZE relationships:
- page_size > PAGE_SIZE: Split MR pages into multiple system pages
- page_size <= PAGE_SIZE: Store offset within system page
4. Add boundary checks and compatibility validation
This ensures correct iova-to-va conversion regardless of MR page size
and system PAGE_SIZE relationship, while improving performance through
array-based sequential access.
Tests on 4K and 64K PAGE_SIZE hosts:
- rdma-core/pytests
$ ./build/bin/run_tests.py --dev eth0_rxe
- blktest:
$ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd
[1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: admv1013: fix NULL pointer dereference on str
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: tmc-etr: Fix race condition between sysfs and perf mode
When trying to run perf and sysfs mode simultaneously, the WARN_ON()
in tmc_etr_enable_hw() is triggered sometimes:
WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc]
[..snip..]
Call trace:
tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc]
coresight_enable_path+0x1c8/0x218 [coresight]
coresight_enable_sysfs+0xa4/0x228 [coresight]
enable_source_store+0x58/0xa8 [coresight]
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x120/0x1b8
vfs_write+0x2c8/0x388
ksys_write+0x74/0x108
__arm64_sys_write+0x24/0x38
el0_svc_common.constprop.0+0x64/0x148
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x130
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Since the enablement of sysfs mode is separeted into two critical regions,
one for sysfs buffer allocation and another for hardware enablement, it's
possible to race with the perf mode. Fix this by double check whether
the perf mode's been used before enabling the hardware in sysfs mode.
mode:
[sysfs mode] [perf mode]
tmc_etr_get_sysfs_buffer()
spin_lock(&drvdata->spinlock)
[sysfs buffer allocation]
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
drvdata->etr_buf = etr_perf->etr_buf
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at
the perf side
spin_unlock(&drvdata->spinlock)
With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf.
This ensures we verify whether the perf mode's already running before we
actually allocate the buffer. Then we can save the time of
allocating/freeing the sysfs buffer if race with the perf mode. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: prevent direct reclaim recursion into NFS via nfs_writepages
LOCALIO is an NFS loopback mount optimization that avoids using the
network for READ, WRITE and COMMIT if the NFS client and server are
determined to be on the same system. But because LOCALIO is still
fundamentally "just NFS loopback mount" it is susceptible to recursion
deadlock via direct reclaim, e.g.: NFS LOCALIO down to XFS and then
back into NFS via nfs_writepages.
Fix LOCALIO's potential for direct reclaim deadlock by ensuring that
all its page cache allocations are done from GFP_NOFS context.
Thanks to Ben Coddington for pointing out commit ad22c7a043c2 ("xfs:
prevent stack overflows from page cache allocation"). |
| In the Linux kernel, the following vulnerability has been resolved:
spi: ch341: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the controller and driver data lifetime so that they are released
on driver unbind.
Note that this also makes sure that the SPI controller is placed
correctly under the USB interface in the device tree. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: kvm: fix vector context allocation leak
When the second kzalloc (host_context.vector.datap) fails in
kvm_riscv_vcpu_alloc_vector_context, the first allocation
(guest_context.vector.datap) is leaked. Free it before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1
Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want
to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the
hypercall is something other than one of the supported Hyper-V hypercalls.
When all of the above conditions are met, KVM will intercept VMMCALL but
never forward it to L1, i.e. will let L2 make hypercalls as if it were L1.
The TLFS says a whole lot of nothing about this scenario, so go with the
architectural behavior, which says that VMMCALL #UDs if it's not
intercepted.
Opportunistically do a 2-for-1 stub trade by stub-ifying the new API
instead of the helpers it uses. The last remaining "single" stub will
soon be dropped as well.
[sean: rewrite changelog and comment, tag for stable, remove defunct stubs] |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: fix damos_walk() vs kdamond_fn() exit race
When kdamond_fn() main loop is finished, the function cancels remaining
damos_walk() request and unset the damon_ctx->kdamond so that API callers
and API functions themselves can show the context is terminated.
damos_walk() adds the caller's request to the queue first. After that, it
shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond
is set). Only if the kdamond is running, damos_walk() starts waiting for
the kdamond's handling of the newly added request.
The damos_walk() requests registration and damon_ctx->kdamond unset are
protected by different mutexes, though. Hence, damos_walk() could race
with damon_ctx->kdamond unset, and result in deadlocks.
For example, let's suppose kdamond successfully finished the damow_walk()
request cancelling. Right after that, damos_walk() is called for the
context. It registers the new request, and shows the context is still
running, because damon_ctx->kdamond unset is not yet done. Hence the
damos_walk() caller starts waiting for the handling of the request.
However, the kdamond is already on the termination steps, so it never
handles the new request. As a result, the damos_walk() caller thread
infinitely waits.
Fix this by introducing another damon_ctx field, namely
walk_control_obsolete. It is protected by the
damon_ctx->walk_control_lock, which protects damos_walk() request
registration. Initialize (unset) it in kdamond_fn() before letting
damon_start() returns and set it just before the cancelling of the
remaining damos_walk() request is executed. damos_walk() reads the
obsolete field under the lock and avoids adding a new request.
After this change, only requests that are guaranteed to be handled or
cancelled are registered. Hence the after-registration DAMON context
termination check is no longer needed. Remove it together.
The issue is found by sashiko [1]. |
