| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, when Zammad checks the digital signature on an incoming S/MIME-signed email, it does not verify that the signing certificate is genuinely trusted, it only checks whether a certificate with a matching name is already stored in the system. An attacker can create their own certificate using the name of a real, previously trusted sender and use it to send a forged email. Zammad will display that email with the same "validly signed" indicator as a genuine message from the real sender, even though the attacker never had access to that sender's actual certificate or private key. This issue is fixed in version 7.1.2. |
| When mongosqld is configured with a client certificate authority file, the listener requests a client certificate during the TLS handshake but does not require one, so a client that presents no certificate is still accepted. In deployments that rely on client certificates as the sole means of identifying users, a remote party with network access to the listener can therefore establish a session and read the MongoDB data exposed through the connector. |
| When an application enables both OCSP and CRL revocation checking on one WOLFSSL_CTX or certificate manager, wolfSSL skips the CRL check for any peer certificate that carries no Authority Information Access OCSP URL, and accepts a certificate the loaded CRL lists as revoked. The soft-fail policy for a missing responder collapses the OCSP result onto success before the code decides whether the CRL fallback is still needed, so "no responder exists" becomes indistinguishable from "the responder answered good". Affected builds define both HAVE_OCSP and HAVE_CRL: --enable-ocsp --enable-crl directly, and implicitly --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-lighty, --enable-wpas, --enable-strongswan, --enable-mosquitto, --enable-jni, --enable-openvpn and --enable-krb. An application is affected only if it calls both wolfSSL_CTX_EnableOCSP() (or wolfSSL_EnableOCSP() / wolfSSL_CertManagerEnableOCSP()) and wolfSSL_CTX_EnableCRL() (or the equivalents) with a CRL loaded; an application that uses OCSP stapling alone through wolfSSL_CTX_EnableOCSPStapling() is not affected, because that sets up a separate OCSP instance. The defect sits in ProcessPeerCerts() and is reachable over TLS 1.0 through TLS 1.3 and DTLS, both on a client verifying a server certificate and on a server verifying a client certificate under mutual or post-handshake authentication. When the skipped check falls on a chain certificate rather than the leaf, the unchecked intermediate is promoted into the certificate manager and stays a trusted signer for every later connection on that context, so an affected long-running process needs its WOLFSSL_CTX torn down and not only its library replaced. All wolfSSL versions from 5.9.2 and earlier are affected; on versions 5.9.1 and 5.9.2 the WOLFSSL_OCSP_CHECKALL configuration fails closed with OCSP_NEED_URL, which leaves wolfSSL_CTX_EnableOCSP() without CHECKALL as the exposed configuration on 5.9.2. |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause improper certificate validation. A successful exploit of this vulnerability might lead to information disclosure, data tampering, and denial of service. |
| A vulnerability was detected in Trusted Domain Project OpenDMARC up to 1.4.2. Affected is the function opendmarc_policy_query_dmarc of the component Multi-Record Set Handler. The manipulation results in authentication bypass by spoofing. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| urllib3 is an HTTP client library for Python. From 1.26.0 until 2.8.0, the proxy_ssl_context, proxy_assert_hostname, proxy_assert_fingerprint, ssl_context, cert_reqs, verify_mode, use_forwarding_for_https=True, and CERT_NONE configuration paths fail to remain separated because target-server TLS settings are incorrectly applied to the HTTPS proxy connection. The trigger is that an application uses an HTTPS proxy and configures target-server TLS settings that must remain separate from the proxy TLS handshake, including HTTPS forwarding with target-specific identity or credentials. Applying cert_reqs=CERT_NONE can overwrite proxy_ssl_context.verify_mode in place, and the mutation persists so later connections reusing the same context may connect to the HTTPS proxy without certificate verification. The attack mechanism is that an attacker intercepts and impersonates the HTTPS proxy after the effective proxy policy accepts the attacker's certificate. The impact is that the attacker can observe or modify forwarded traffic or receive a target TLS client certificate, while CONNECT tunneling still preserves the separate end-to-end target TLS connection. This issue is fixed in version 2.8.0. |
| A failed X509_verify_cert call permanently plants an unverified attacker CA in the shared CertManager, bypassing certificate validation in every type-blind sibling consumer (native TLS, OCSP, CRL, direct CM verify). This affects version 5.8.4 through 5.9.2 of wolfSSL with the macros (OPENSSL_EXTRA && !NO_CERTS && !WOLFCRYPT_ONLY) defined or built with --enable-opensslextra and the application is specifically making calls to the X509_verify_cert function. |
| A certificate with no dNSName SAN but another SAN type present (e.g. registeredID or iPAddress) bypassed the Subject CN dNSName name-constraint check. The CN-as-DNS fallback was gated on cert->subjectCN != NULL && cert->altNames == NULL && !cert->isCA instead of "no dNSName SAN", so an out-of-scope CN was accepted. This incomplete fix from CVE-2026-6731, leading to the name-constraint check issue, was introduced in wolfSSL version 5.9.2. |
| wolfSSL versions 5.9.2 and earlier contain a flaw in the X.509 certificate validation logic where it fails to properly enforce NameConstraints extensions when there is an unconstrained CA tier between a name-constrained intermediate CA and the leaf certificate. wolfSSL incorrectly accepted certificates for hostnames they shouldn't be allowed to cover, due to a chain-walking state-machine bug that resets the validation state when encountering an intermediate without NameConstraints, thereby bypassing cryptographic delegation controls. This defect exists in the default build configuration that makes use of certificates where name constraint extensions are used. Thanks to Jack Lloyd, PathDiff, and Ben Smyth for reporting the issue. |
| In wolfSSL versions 5.7.2 through 5.9.2 there is a client-side implementation flaw in RFC 6961, multiple OCSP response stapling, which can lead to certificate forgery. When a wolfSSL client enables OCSP stapling with the HAVE_CERTIFICATE_STATUS_REQUEST_V2 feature and calls wolfSSL_UseOCSPStaplingV2(ssl, WOLFSSL_CSR2_OCSP_MULTI, options), the client accepts any certificate in the peer's chain as a certificate authority without verifying that the certificate is actually authorized to act as one. This means that an attacker who possesses any certificate that chains to a CA trusted by the client (along with its private key) can forge certificates for arbitrary identities that will be accepted as valid by the client. The end entity certificate of the server is stored in the persistent trust store, affecting subsequent connections that reuse the context even when OCSP multi usage is not employed. Found by internal wolfSSL testing. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, Versions prior to 5.36, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with adjacent network access could potentially exploit this vulnerability, leading to Information disclosure, Information tampering, and Protection mechanism bypass. |
| NVIDIA Infrastructure Controller for Linux contains a vulnerability where an attacker could cause improper certificate validation. A successful exploit of this vulnerability might lead to information disclosure, data tampering, and denial of service. |
| Spoofing issue in the Networking: HTTP component. This vulnerability was fixed in Firefox ESR 153.4 and Firefox 157. |
| Mongoose is an embedded web server and network library. Prior to version 7.22, an on-path network attacker with a wildcard certificate for a parent domain can impersonate deeper subdomains to a client using the built-in TLS stack. The mg_tls_verify_cert_san() and mg_tls_verify_cert_cn() functions in src/tls_builtin.c call mg_match(), whose wildcard can cross DNS label boundaries, so a pattern such as *.example.com can match foo.bar.example.com. The resulting hostname verification bypass permits interception and modification of TLS traffic. This issue is fixed in version 7.22. |
| Mongoose is an embedded web server and network library. Prior to 7.23, a network attacker can impersonate a TLS server to a Mongoose client configured with a multi-certificate CA bundle. In src/tls_builtin.c, the mg_tls_init() function stores the bundle in tls->ca_bundle_der while tls->ca_der.len remains zero, and mg_tls_recv_cert() uses tls_bundle_find() to accept a Common Name match without calling mg_tls_verify_cert_signature(). A forged self-signed certificate can therefore satisfy hostname and CertificateVerify checks and enable interception, credential disclosure, traffic modification, and malicious responses. This issue is fixed in version 7.23. |
| A session fixation vulnerability was found in Keycloak's login-actions endpoints. An unauthenticated attacker could exploit this flaw by pre-creating an authentication session and tricking a victim into visiting a maliciously crafted link. By leveraging the /login-actions/restart endpoint—which processes session handles without adequate CSRF protection or cookie ownership validation—an attacker can reset the authentication flow state. This causes Single Sign-On (SSO) to authenticate the victim transparently upon clicking the link, allowing the attacker to hijack the required-action form without needing the victim's credentials. A successful exploit could lead to complete account takeover, including highly privileged administrative accounts. |
| LiteLLM contains a weak authentication vulnerability that allows an attacker holding a valid JWT from the configured identity provider to authenticate as any existing user by exploiting an email-based fallback lookup in the JWT authentication flow without verifying the email_verified claim. Attackers can present a token with an unverified email address matching a victim's account to inherit the victim's role, including proxy_admin privileges, and permanently overwrite the victim's stored identity binding to retain persistent unauthorized access to administrative endpoints exposing API keys and user management. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, When no CA bundle is available, ssl_options/1 falls back to [{verify, verify_none}] with no warning. An attacker in a man-in-the-middle position can forge the JWKS response, which leads the broker to accept arbitrary JWTs. Preconditions include The OAuth2 plugin must be in use with no cacertfile configured and the OS CA bundle empty or unreadable (for example, in a minimal container), and the attacker must hold a network man-in-the-middle position.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The trust-store plugin installs a verify_fun that overrides {bad_cert, unknown_ca} / {bad_cert, selfsigned_peer} when the presented cert "matches" a whitelisted one. The match key is extract_issuer_id/1 → public_key:pkix_issuer_id/2 → {IssuerName, SerialNumber} , both fields are taken verbatim from the presented certificate body and contain no public-key, SKI, fingerprint or signature material. is_whitelisted/1 is a pure ets:member lookup; the stored full DER is used only for list/0 display and is never compared against the presented cert. cacerts is [], so the whitelisted cert is never used as a trust anchor for path validation either. TLS client-authentication bypass: an attacker who knows the issuer DN + serial of any whitelisted certificate can connect with a forged self-signed cert. Preconditions include rabbitmq_trust_store plugin enabled and used as the TLS verify_fun Attacker knows or can guess the {Issuer, Serial} of at least one whitelisted cert (non-secret; exposed via CLI/logs/any cert copy). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks. |
