| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: folio_put() after error
dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of
kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator
corruption.
While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF
by future callers. |
| Invalid pointer in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 157. |
| A flaw was found in libxml2 with Python bindings enabled. A remote attacker could exploit this vulnerability by providing a specially crafted XML document containing a Document Type Definition (DTD) with enumerated attribute values. This triggers a double-free error in the SAX attributeDecl callback handler, where a string is freed twice. This flaw can lead to a denial of service (DoS) due to a reproducible crash in Python applications using the libxml2 SAX bindings. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
padapter->HalData is allocated via vzalloc(), but incorrectly freed
using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to
release this vmalloc-backed buffer can lead to memory corruption.
Use rtw_hal_data_deinit() to pair the free correctly and free
HalData with vfree().
The bug was first flagged by an experimental static analysis tool we
are developing for kernel memory-management bugs. Manual inspection
confirms that the issue is still present in current mainline.
An x86_64 allyesconfig build showed no new warnings. As we do not have
suitable RTL8723BS SDIO hardware to test with, no runtime testing was
able to be performed. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: avoid unneeded actions on subflow reset
Once in a blue moon, the mptcp receive path can recursively call
mptcp_data_ready() via state change under unlucky error conditions, and
then try to hold the data lock again.
Break the recursion loop explicitly checking for the exceptional
condition.
Add a new flag instead of using an existing one like 'closing', to exit
early in subflow_state_change(), and explicitly flush the RX queue at
reset time.
This avoids unneeded processing to check for available data -- calling
get_mapping_status() and more on a dying subflow -- but also in error
reporting and worker scheduling.
Note that we must consume the currently peeked skb before invoking
mptcp_dss_corruption to avoid consuming it again after the eventual
reset has freed it. |
| An invalid pointer release vulnerability exists in YARA 4.5.8 during deserialization of compiled .yrc rule files. The vulnerability is caused by insufficient validation of external-variable pointers, which may lead to invalid free in yr_rules_destroy() or wild pointer access in yr_object_create(). An attacker can provide a specially crafted .yrc file that causes memory corruption and application crash. |
| In the Linux kernel, the following vulnerability has been resolved:
igmp: convert struct ip_sf_list to RCU
Commit 23d2b94043ca ("igmp: Add ip_mc_list lock in ip_check_mc_rcu")
added spin_lock_bh(&im->lock) to ip_check_mc_rcu() to prevent a
use-after-free while iterating im->sources during concurrent deletions.
However, ip_check_mc_rcu() is called from RCU read-side critical
sections in packet receive and route lookup fast paths (e.g.
__mkroute_output(), ip_route_input_rcu(), and __udp4_lib_rcv()).
When igmpv3_send_cr() or igmpv3_send_report() holds &pmc->lock and
calls add_grec() -> igmpv3_newpack() -> ip_route_output_ports(),
an XFRM policy matching a multicast destination triggers
xfrm_tmpl_resolve_one() -> xfrm4_get_saddr() -> __mkroute_output() ->
ip_check_mc_rcu(). This attempts to acquire &im->lock while &pmc->lock
is already held on the same CPU, triggering a lockdep recursive locking
warning / deadlock.
Fix this by converting IPv4 struct ip_sf_list to RCU, mirroring the
IPv6 implementation in net/ipv6/mcast.c:
1. Add struct rcu_head to struct ip_sf_list and annotate sf_next,
sources, and tomb as __rcu pointers.
2. Use rcu_assign_pointer() and kfree_rcu() for list updates and
deletions.
3. Remove spin_lock_bh(&im->lock) from ip_check_mc_rcu() and traverse
im->sources locklessly with for_each_psf_rcu(), reading and writing
counter fields with READ_ONCE() and WRITE_ONCE().
Note: RCU conversion of /proc/net/mcfilter will be done in a
separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix circular locking dependency in ocfs2_init_acl()
A lockdep warning indicates a circular locking dependency between
`&oi->ip_xattr_sem` and `&journal->j_trans_barrier`:
WARNING: possible circular locking dependency detected
is trying to acquire lock:
(&oi->ip_xattr_sem){++++}-{4:4}, at: ocfs2_init_acl+0x2fd/0x7e0
fs/ocfs2/acl.c:367
but task is already holding lock:
(&journal->j_trans_barrier){.+.+}-{4:4}, at: ocfs2_start_trans+0x3ab/0x700
fs/ocfs2/journal.c:369
The deadlock involves two code paths: Path 1 (setxattr) where
`ocfs2_xattr_set()` acquires `ip_xattr_sem` (write) and then starts a
transaction, which acquires `j_trans_barrier` (read); and Path 2
(mkdir/mknod) where `ocfs2_mknod()` starts a transaction (`j_trans_barrier`
read) and then calls `ocfs2_init_acl()`, which attempts to acquire
`ip_xattr_sem` (read) on the parent directory to retrieve the default ACL.
Because rw_semaphores are subject to writer priority, a pending writer on
`j_trans_barrier` (e.g., the journal commit thread) can cause Path 1 to
block, while Path 2 is blocked waiting for Path 1 to release
`ip_xattr_sem`.
The patch fixes the lock ordering by precomputing the ACL state before
starting the OCFS2 transaction, while preserving POSIX ACL storage
semantics and the existing inode/security initialization order. By reading
the parent directory's default ACL and preparing the new inode's ACLs
outside the transaction, `ip_xattr_sem` is always acquired before
`j_trans_barrier`.
`struct ocfs2_acl_state` encapsulates the prepared ACL state, while
`ocfs2_acl_init_prepare()` and `ocfs2_acl_init_release()` avoid code
duplication between `ocfs2_mknod()` and `ocfs2_init_security_and_acl()`.
`ocfs2_calc_xattr_init()` and `ocfs2_init_acl()` use this precomputed
state, removing internal `ip_xattr_sem` acquisition and redundant disk
reads.
Additionally, remove the `ip_xattr_sem` acquisition from
`ocfs2_xattr_set_handle()`. This function is only used while initializing a
new inode that has not yet been inserted into the inode hash or attached to
a dentry, meaning there is no risk of concurrent access and the lock is
unnecessary. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2: fix LAYOUTSTATS send buffer exhaustion
encode_layoutstats_maxsz budgets XDR_QUADLEN(PNFS_LAYOUTSTATS_MAXSIZE),
i.e. 256 bytes, for the layoutupdate4 body written by the layout driver.
The flexfiles record can exceed that.
ff_layout_encode_ff_layoutupdate() emits, per data server, a netaddr4,
an nfs_fh4, two ff_io_latency4, an nfstime4 and a bool. A data server
whose filehandle is NFS_MAXFHSIZE bytes long already accounts for 132 of
those bytes, and the two ff_io_latency4 at 64 bytes each, the nfstime4
and the bool add a further 144, so the body passes 256 bytes before the
netaddr4 is encoded at all. encode_layoutstats() additionally writes
the deviceid4 and the layoutupdate4 lou_type word, neither of which the
macro accounts for.
The filehandle and the address are both chosen by the server, through
LAYOUTGET and GETDEVICEINFO, so it can drive the encoder past the
end of the send buffer. xdr_reserve_space() returns NULL once that
happens, and the two ff_layout_encode_io_latency() calls run with
dss_info->mirror->lock held, so a NULL return there leaves the lock
permanently held.
Raise PNFS_LAYOUTSTATS_MAXSIZE to 384 so that the record fits inside the
reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix CFI mismatch in task work callback
BPF subprograms use the bpf_callback_t ABI, but task work invokes the
callback through a three-argument function pointer. This trips kCFI.
Store and invoke the callback as bpf_callback_t. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unwind TX receiver mailbox setup failure
mailbox_chan_setup() can request an additional unidirectional TX
receiver channel after successfully acquiring the primary channel. If
that second request fails, the function returns immediately and leaves
the primary channel allocated.
Unwind the primary mailbox channel before returning the error so probe
deferral or other setup failures do not leave the channel busy for later
probe attempts. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: release hif2 reference on probe IRQ failure
The hif2 reference obtained by mt7915_pci_init_hif2() is only released on
error paths that key off dev->hif2, which is not assigned until after the
IRQ setup. If pci_alloc_irq_vectors() or the primary devm_request_irq()
fails, the reference leaks. Drop it explicitly on those paths via
mt7915_put_hif2(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: defrag: fix deadlock between defrag and delalloc space reservation
While running fsstress with autodefrag and flushoncommit, hit a deadlock
due to the fact that defrag reserves delalloc space while it's holding
dirty and locked folios, besides the extent range lock. The stack traces
are the following:
[958.624] task:kworker/u50:3 state:D stack:0 pid:20365 tgid:20365 ppid:2 task_flags:0x4208060 flags:0x00080000
[958.626] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
[958.627] Call Trace:
[958.628] <TASK>
[958.628] __schedule+0x4be/0x10f0
[958.629] ? preempt_count_add+0x69/0xa0
[958.630] schedule+0x26/0xd0
[958.631] wait_current_trans+0x102/0x160 [btrfs]
[958.632] ? __pfx_autoremove_wake_function+0x10/0x10
[958.633] start_transaction+0x374/0x900 [btrfs]
[958.634] btrfs_commit_current_transaction+0x1d/0x70 [btrfs]
[958.635] flush_space+0xca/0x5e0 [btrfs]
[958.636] ? _raw_spin_unlock+0x15/0x30
[958.637] ? btrfs_reduce_alloc_profile+0x8c/0x190 [btrfs]
[958.639] ? _raw_spin_unlock+0x15/0x30
[958.640] ? calc_available_free_space.isra.0+0x6f/0x110 [btrfs]
[958.641] do_async_reclaim_metadata_space+0x84/0x190 [btrfs]
[958.642] btrfs_async_reclaim_metadata_space+0x64/0x80 [btrfs]
[958.644] process_one_work+0x19d/0x3a0
[958.644] worker_thread+0x1c4/0x330
[958.645] ? __pfx_worker_thread+0x10/0x10
[958.646] kthread+0xfc/0x130
[958.647] ? __pfx_kthread+0x10/0x10
[958.648] ret_from_fork+0x1f7/0x2c0
[958.648] ? __pfx_kthread+0x10/0x10
[958.649] ret_from_fork_asm+0x1a/0x30
[958.650] </TASK>
[958.651] task:kworker/u49:7 state:D stack:0 pid:52990 tgid:52990 ppid:2 task_flags:0x4208060 flags:0x00080000
[958.653] Workqueue: writeback wb_workfn (flush-btrfs-334)
[958.655] Call Trace:
[958.655] <TASK>
[958.656] __schedule+0x4be/0x10f0
[958.657] ? __blk_flush_plug+0xe9/0x140
[958.658] schedule+0x26/0xd0
[958.658] io_schedule+0x42/0x70
[958.659] folio_wait_bit_common+0x12b/0x330
[958.660] ? folio_wait_bit_common+0x100/0x330
[958.662] ? __pfx_wake_page_function+0x10/0x10
[958.663] extent_write_cache_pages+0x599/0x830 [btrfs]
[958.664] ? acpi_fwnode_get_reference_args+0x1fa/0x270
[958.665] btrfs_writepages+0x77/0x130 [btrfs]
[958.666] ? __pfx_end_bbio_data_write+0x10/0x10 [btrfs]
[958.667] do_writepages+0xc6/0x160
[958.668] __writeback_single_inode+0x42/0x310
[958.669] writeback_sb_inodes+0x231/0x570
[958.670] wb_writeback+0x8a/0x340
[958.671] wb_workfn+0xbf/0x450
[958.672] ? finish_task_switch.isra.0+0xc1/0x350
[958.673] process_one_work+0x19d/0x3a0
[958.673] worker_thread+0x1c4/0x330
[958.674] ? __pfx_worker_thread+0x10/0x10
[958.675] kthread+0xfc/0x130
[958.676] ? __pfx_kthread+0x10/0x10
[958.676] ret_from_fork+0x1f7/0x2c0
[958.677] ? __pfx_kthread+0x10/0x10
[958.678] ret_from_fork_asm+0x1a/0x30
[958.679] </TASK>
[958.679] task:btrfs-cleaner state:D stack:0 pid:296750 tgid:296750 ppid:2 task_flags:0x208040 flags:0x00080000
[958.681] Call Trace:
[958.682] <TASK>
[958.682] __schedule+0x4be/0x10f0
[958.683] schedule+0x26/0xd0
[958.684] handle_reserve_ticket+0x1b9/0x2c0 [btrfs]
[958.685] ? __pfx_autoremove_wake_function+0x10/0x10
[958.686] reserve_bytes+0x283/0x4c0 [btrfs]
[958.687] btrfs_reserve_metadata_bytes+0x18/0xb0 [btrfs]
[958.688] btrfs_delalloc_reserve_metadata+0x121/0x320 [btrfs]
[958.690] btrfs_delalloc_reserve_space+0x46/0xb0 [btrfs]
[958.691] btrfs_defrag_file+0x903/0x1110 [btrfs]
[958.692] btrfs_run_defrag_inodes+0x334/0x430 [btrfs]
[958.694] cleaner_kthread+0x97/0x1c0 [btrfs]
[958.694] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs]
[958.696] kthread+0xfc/0x130
[958.696] ? __pfx_kthread+0x10/0x10
[958.697] ret_
---truncated--- |
| vm2 versions before 3.11.2 fail to properly restrict access to the VM2_INTERNAL_STATE_DO_NOT_USE_OR_PROGRAM_WILL_FAIL global variable. Attackers can access this internal state object through globalThis to retrieve sensitive sandbox internals. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: clear the dirty flag when unwinding an OP_UNMAP_SPARSE
A successful OP_UNMAP_SPARSE marks its region dirty with
nouveau_uvma_region_dirty() and defers the teardown to
nouveau_uvmm_bind_job_cleanup(); it does not remove the region from
uvmm->region_mt.
If a later op in the job fails, the unwind path never clears reg->dirty
(set in one place, cleared nowhere) and sets op->reg = NULL, so cleanup
skips the teardown. The region is left in the tree with dirty set and its
completion never signalled. Later binds over that range then fail
permanently -- -ENOENT or -EINVAL from the dirty checks, or an unkillable
wait_for_completion() in bind_validate_region() -- for the lifetime of
the uvmm.
Clear reg->dirty when the unwind reverts the sparse unmap, restoring the
region to the state it was found in. |
| Use of a One-Way Hash with a Predictable Salt vulnerability in team-alembic AshAuthentication allows readers of the audit store to recover the client IP addresses that the audit log add-on's :hash privacy mode is meant to pseudonymise.
AshAuthentication.AddOn.AuditLog.IpPrivacy.hash_ip/1 computes a single unkeyed :crypto.hash(:sha256, salt <> ip) and truncates the result to 16 hexadecimal characters. The salt is read from the :audit_log_ip_salt or :secret application config keys, and falls back to the constant "default-salt-change-in-production" published in the library source when neither is set, with nothing warning that the default is in use. The IPv4 space is only 2^32 values and SHA-256 is fast, so the whole hash table is precomputable and every stored value maps back to its source address. Truncating to 16 characters does not help, and even a configured salt leaves the hash cheap enough to enumerate once it leaks.
This issue affects ash_authentication: from 4.12.0 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nat: use kfree_rcu to release ops
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook. |
| If one side of the TLS connection sends multiple key update messages post-handshake in a single record, the connection can deadlock, causing uncontrolled consumption of resources. This can lead to a denial of service. This only affects TLS 1.3. |
| Release of Invalid Pointer or Reference in Armoury Crate driver allows a local user to free arbitrary memory via a crafted IOCTL request by bypassing the driver's verification, which can corrupt data structures and cause a system crash (BSOD).Refer to the '
Security Update for Armoury Crate App ' section on the ASUS Security Advisory for more information. |
| Release of invalid pointer or reference in Windows Device Association Service allows an authorized attacker to elevate privileges locally. |
