| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix use-after-free in vxlan_mdb_remote_src_del()
vxlan_mdb_is_valid_source(), which validates MDBE_ATTR_SOURCE and every
MDBE_ATTR_SRC_LIST member, accepts the all-zeros address.
A source list is only accepted on a (*, G) entry, whose source is the
all-zeros address, and for each member of the list an (S, G) entry is
derived from it by substituting the source. Entries are keyed by a plain
memcmp() of struct vxlan_mdb_entry_key, so if MDBE_ATTR_SOURCE is present
and holds the all-zeros address and the source list holds it as well, the
derived (S, G) key is byte-identical to the (*, G) key and resolves to the
same entry. Omitting MDBE_ATTR_SOURCE is not equivalent, as the key is
then left with a zero address family.
vxlan_mdb_remote_src_del() removes the forwarding entry of a source before
freeing the source entry:
vxlan_mdb_remote_src_fwd_del(vxlan, group, remote, &ent->addr);
vxlan_mdb_remote_src_entry_del(ent);
With the keys aliased, the first call deletes the remote of the entry that
owns 'ent' instead of a separate (S, G) entry, and frees 'ent'. The second
call then runs on the freed entry, and its hlist_del() reads ->pprev and
->next out of it and writes through them.
Adding the (*, G) entry with NLM_F_REPLACE and no source list marks the
all-zeros source for deletion and reaches this from the sweep at the end
of vxlan_mdb_remote_srcs_replace().
BUG: KASAN: slab-use-after-free in __vxlan_mdb_add+0x1cd/0xd70
Read of size 8 at addr ffff888102852500 by task poc/84
__vxlan_mdb_add+0x1cd/0xd70
vxlan_mdb_add+0xc0/0x140
rtnl_mdb_add+0x157/0x2a0
rtnetlink_rcv_msg+0x207/0x5a0
Allocated by task 84:
__kmalloc_cache_noprof+0x153/0x360
vxlan_mdb_remote_srcs_add+0x2eb/0x440
__vxlan_mdb_add+0x803/0xd70
Freed by task 84:
kfree+0x14c/0x3b0
vxlan_mdb_remote_del+0x129/0x1a0
__vxlan_mdb_del+0x4f/0xe0
vxlan_mdb_remote_src_fwd_del.isra.0+0x162/0x1b0
__vxlan_mdb_add+0x1c5/0xd70
The MDB operations are netns-scoped, so an unprivileged user can perform
them in a new user and network namespace.
Reject the all-zeros address in vxlan_mdb_is_valid_source(), which covers
both call sites. A (*, G) entry is expressed by omitting the source, so
nothing legitimate is refused.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix listener task lifetime on netdev events
The listener thread exits when its listening socket is shutdown. The
netdevice notifier shuts down the socket before calling kthread_stop(), so
the task_struct can be freed before kthread_stop() gets its reference.
Create the listener in a stopped state and hold an extra task_struct
reference until kthread_stop_put() completes. Also stop and release
listeners before freeing their interface records during TCP teardown. |
| Use after free in Metrics in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to execute arbitrary code outside the sandbox via crafted network traffic. (Chromium security severity: Medium) |
| Use after free in Aura in Google Chrome prior to 154.0.8037.57 allowed a local attacker to potentially execute arbitrary code outside the sandbox via UI Interaction. (Chromium security severity: High) |
| Use after free in Platform in Google Chrome prior to 154.0.8037.57 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Views in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in FullScreen in Google Chrome prior to 154.0.8037.92 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Verifier in Google Chrome prior to 154.0.8037.57 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via crafted network traffic. (Chromium security severity: Medium) |
| Use after free in Updater in Google Chrome on on Mac prior to 154.0.8037.57 allowed a remote attacker to execute arbitrary code outside the sandbox via crafted network traffic. (Chromium security severity: Medium) |
| Use after free in Passwords in Google Chrome prior to 154.0.8037.92 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in PictureInPicture in Google Chrome prior to 154.0.8037.92 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free race in sample_restore_put()
Concurrent teardown of TC sample rules sharing the same restore
context may re-read restore->count after dropping restore_lock.
At that point another thread may already have completed cleanup and
freed the restore object.
Use the result of the refcount decrement while holding restore_lock to
determine whether cleanup is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject untrusted allocated-object pointers
When the final RCU read-side critical section ends, a local kptr is demoted
to PTR_UNTRUSTED but retains MEM_ALLOC. The pointer may be NULL or may refer
to an object whose lifetime is no longer protected.
type_is_ptr_alloc_obj() nevertheless recognizes any PTR_TO_BTF_ID with
MEM_ALLOC as a live allocated object. In particular, a refcount-only local
kptr never carries NON_OWN_REF, so it still passes the
bpf_refcount_acquire() argument check after RCU protection ends. The kfunc
can then dereference NULL or stale memory.
Make type_is_ptr_alloc_obj() reject PTR_UNTRUSTED pointers. Since
type_is_non_owning_ref() is based on the same predicate, graph kfunc
arguments obey the same live-object requirement. Fault-protected reads of
the demoted pointer remain valid: writes are already rejected, and read
fixups use bpf_may_fault_on_deref() rather than this predicate.
[ kkd: Rewrote commit log ] |
| Use after free in DevTools in Google Chrome prior to 154.0.8037.57 allowed a remote attacker leveraging social engineering to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Issue summary: The first concurrent use of the same X.509 certificate by
several threads may cause its cached extension data to be freed while
another thread is still using it.
Impact summary: A remote, unauthenticated peer could crash a multi-threaded
TLS client, or a multi-threaded TLS server that requests client
certificates, if the first certificate chains built to the same trusted CA
certificate are built by several connections at the same time. This is a
use-after-free read, which is likely to crash the process, resulting in a
Denial of Service.
CWE: CWE-416: Use After Free
Description: OpenSSL caches the decoded values of a certificate's X.509v3
extensions inside the X509 object the first time they are needed. In
OpenSSL 4.0 this cache is built in two phases: the extension values are
computed while holding a read lock on the certificate, and the results are
then installed into the certificate under a write lock. Because a read lock
does not exclude other readers, several threads can compute the cache for
the same certificate at the same time. Each thread that subsequently
acquires the write lock installs its own results and frees the values
installed by the thread before it, even though that earlier thread has
already marked the cache as complete and may have returned pointers into it
to its caller. A caller still using those pointers then reads freed memory.
Any certificate shared between threads is exposed the first time its
extensions are decoded. In TLS the certificates at risk are the trusted CA
certificates supplied for chain verification, by whatever means, since these
are shared by every connection and their extensions are decoded and cached
the first time a chain is built to them. Certificates sent by the peer are
decoded separately for each connection and are not shared, so they are not
affected. In a TLS client verifying server certificates, or a TLS server
that requests and verifies client certificates, the use-after-free could
only occur if the first chains built to the same trusted CA are built by
several connections at the same time.
FIPS impact: no
The FIPS module is not affected as X.509 certificate handling is outside
of the OpenSSL FIPS module boundary.
OpenSSL 4.0 is vulnerable to this issue.
OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue.
OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3.
This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and
independently in a public report on 31 August 2026 by aydinmercan.
The fix has been developed by Bob Beck.
-- cut (non-publishing metadata for internal use) --
Reported by: Tim Becker (Xint.io), aydinmercan
Fixed by: Bob Beck |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mcast: properly convert mglist to rcu
Sashiko reported a bug [1] that br_multicast_del_port_group unlists the
port group not using proper rcu helper that preserves the next pointer and
after that immediately frees the port group without waiting for rcu grace
period. The only rcu walker of mglist is br_multicast_list_adjacent() and
it turns out that function has always been buggy because mglist was never
properly converted to RCU. Fix it by converting it to rcu and moving its
initialization after eth_addr's. Initializing p->next can use
RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call
later, besides we're initializing an unpublished structure anyway.
[1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve inner map identity in callback frames
Callback frame constructors initialize map-typed argument registers with
__mark_reg_known_zero() and then restore map_ptr. This clears map_uid,
which is the only field distinguishing inner maps that share an
inner_map_meta template.
When a timer callback invokes bpf_for_each_map_elem() on a second inner
map, both the saved first map and the second map value can reach the nested
callback as the same template with map_uid zero. bpf_timer_init() then
accepts pairing the timer from the second map with the first map.
The runtime records the first map in the timer without taking a reference.
Freeing that map does not find the timer stored in the second map, so a
later timer callback dereferences the freed map.
Copy map_uid from the same caller register as map_ptr when constructing
for-each, timer/workqueue, and task-work callback arguments. The existing
identity check can then reject mismatched inner maps while allowing a
callback value to be paired with its actual map. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix use-after-free in alarm work
fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing
cancels it. fan_alarm_notify() dereferences fan_data and its hwmon
device. On unbind, devres frees the interrupt, which only waits for
the handler itself, and then releases the hwmon device and fan_data,
so a pending fan_alarm_notify() can run after those frees.
Replace INIT_WORK() with devm_work_autocancel(), registered before
devm_request_irq(). The devres cleanup then frees the interrupt
first, so no new work can be queued, and cancels the work while
fan_data and the hwmon device are still alive.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Clear stale peer app data after address list changes
afs_fs_probe_fileserver() fetches the current endpoint state under
server->fs_lock, but leaves old_alist as NULL. Consequently,
afs_set_peer_appdata() treats every address list replacement as initial
setup and only binds the new peers; it never unbinds peers removed from
the old list.
An address refresh can therefore proceed as follows. CPU 0 replaces
server S's list and drops Pold without clearing Pold->app_data. The
server destroyer then clears only S's current peers and lets S reach its
RCU callback. After the callback frees S, CPU 1 handles a callback
through an RxRPC connection that still pins Pold, reads Pold->app_data,
and calls afs_use_server() on the freed object.
KASAN reported:
BUG: KASAN: slab-use-after-free in afs_find_server+0x3c/0xa0
Read of size 4 at addr ffff8881013e1af0 by task krxrpcio/7001/74
Call Trace:
afs_find_server+0x3c/0xa0
afs_rx_new_call+0x15c/0x390
rxrpc_new_incoming_call+0x97c/0x1730
rxrpc_input_packet.constprop.0+0xd03/0xec0
rxrpc_io_thread+0x967/0x1640
Allocated by task 93:
afs_lookup_server+0x1a7/0x14c0
afs_alloc_server_list+0x43f/0xb60
afs_create_volume+0x923/0x1490
afs_get_tree+0x1c6/0x10a0
Freed by task 0:
kfree+0x131/0x3c0
rcu_core+0x50a/0x1850
Last potentially related work creation:
__call_rcu_common.constprop.0+0x71/0xa10
afs_put_server+0x213/0x2b0
Preserve old->addresses for the peer app-data update so that removed
peers are cleared before the endpoint state is replaced. Also advance
both cursors when the old and new lists share a peer; activating the
old/new comparison without this would otherwise loop forever on the
shared entry. |
| OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.1.16.0, a crafted ZIP-compressed TIFF processed with TIFF multithreading enabled can make TIFFInput::read_native_scanlines() return through an error path while asynchronous strip-decompression work remains queued. Because task_set is declared before ok and compressed_scratch, those captured objects are destroyed before the task-set destructor waits, allowing worker tasks to use stale stack and heap storage, resulting in a use-after-scope crash and denial of service. The affected implementation is identified by src/tiff.imageio/tiffinput.cpp, TIFFInput::read_native_scanlines(), task_set, ok, compressed_scratch, and uncompress_one_strip(), which define the relevant source path, functions, state, and trigger. This issue is fixed in 3.1.16.0. |
