Export limit exceeded: 26649 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26649 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-103065 | 2026-10-03 | 8.2 High | ||
| Improper Validation of Specified Quantity in Input vulnerability in Themeum Kirki kirki allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Kirki: from n/a through 6.3.1. | ||||
| CVE-2026-98158 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ppp_async: drop the errored frame instead of resetting its headroom ppp_receive_nonmp_frame() prepends a two-byte direction tag before running the pass/active BPF filters: *(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG); Nothing on the receive path guarantees those two bytes of headroom. The frame-error path in ppp_async's process_input_packet() resets a reused skb's headroom to zero while claiming to restore it to a freshly allocated state - but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD: err: if (skb) { /* make skb appear as freshly allocated */ skb_trim(skb, 0); skb_reserve(skb, - skb_headroom(skb)); } ap->rpkt still points at that skb, so the next frame is reassembled into it with no headroom at all. A peer that sends a bad-FCS frame followed by one beginning ff 03 then leaves a single byte of headroom by the time the filter tag is pushed, which lands one byte below skb->head: skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000 data:ffff888003c0ffff tail:0x30 end:0x640 dev:<NULL> kernel BUG at net/core/skbuff.c:214! RIP: 0010:skb_panic+0x13e/0x230 Call Trace: skb_push+0xbd/0x100 ppp_receive_nonmp_frame+0x48a/0x1d10 ppp_input+0x4e9/0x2f80 ppp_async_process+0x2a/0xe0 tasklet_action_common+0x20f/0x8a0 handle_softirqs+0x18e/0x590 Kernel panic - not syncing: Fatal exception in interrupt Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb() gives the rest of the receive path. Besides the filter panic above, when CCP compression is enabled ppp_decompress_frame() hands skb->data - 2 to ->decompress()/->incomp(), which then reads out of bounds before skb->head for the same reason. Rather than restore the headroom, drop the errored frame - as ppp_synctty already does on its error path - and clear ap->rpkt so the next frame is reassembled into a fresh skb with proper headroom. This is simpler and fixes both the filter under-panic and the CCP out-of-bounds read. The original V1 of this patch made room in ppp_receive_nonmp_frame() with skb_cow_head(); Eric pointed out that fixing the root cause in the transport is the right approach. Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an interesting (remote) DoS: root configures PPP, the peer supplies two crashing frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a second, and returns cleanly with this applied. | ||||
| CVE-2026-98155 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Address potential out-of-bounds read in resp_worker() Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the owner went away")' fixes the scenario it was intended for by walking the message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it skipped over the bounds checking code that is included in decode_message(). This could lead to issues such as reading past the slab allocation's end, infinite loops or kernel panics. For those issues to happen, a malformed wire message is needed to be sent from the device. Instead of duplicating the bounds checking code already present in decode_message(), use the function inside resp_worker(). | ||||
| CVE-2026-98111 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: validate version TLV value lengths btintel_parse_version_tlv() verifies that a complete TLV is present in the response, but it does not ensure that the value is long enough for the specific TLV type. A short value can therefore cause an out-of-bounds read through get_unaligned_le16(), get_unaligned_le32(), or memcpy(). Reject values shorter than the minimum required by each known TLV type. Also reject responses that do not contain the Command Complete Status field. | ||||
| CVE-2026-98088 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index. | ||||
| CVE-2026-98080 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: do not force reloc root creation during qgroup_account_snapshot() [BUG] When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota", it has a high chance to trigger the following kernel warning and flips the fs RO: BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup ------------[ cut here ]------------ WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173 CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs] Call Trace: <TASK> insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_run_delayed_refs+0x4af/0x11c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_run_delayed_refs+0x9d/0xf0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] create_pending_snapshot+0x39d/0xf00 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] create_pending_snapshots+0x9b/0xc0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_commit_transaction+0x280/0xeb0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] prepare_to_relocate+0x147/0x200 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] relocate_block_group+0x6b/0x5e0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_relocate_block_group+0x92c/0x2380 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_relocate_chunk+0x3f/0x1a0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_balance+0xa2c/0x19c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_ioctl+0x2839/0x2d30 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __x64_sys_ioctl+0x416/0x9a0 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS info (device dm-2): leaf 4593991680 gen 233 total ptrs 175 free space 5953 owner 2 BTRFS info (device dm-2): refs 3 lock_owner 2173 current 2173 item 0 key (166772736 METADATA_ITEM 1) itemoff 16250 itemsize 33 extent refs 1 gen 222 flags 2 ref#0: tree block backref root 266 [ Skip the tree dump ] item 174 key (263225344 METADATA_ITEM 0) itemoff 10328 itemsize 33 extent refs 1 gen 162 flags 258 ref#0: tree block backref root 267 BTRFS error (device dm-2): extent item not found for insert, bytenr 179847168 num_bytes 16384 parent 4594335744 root_objectid 273 owner 0 offset 0 BTRFS error (device dm-2): failed to run delayed ref for logical 179847168 num_bytes 16384 type 182 action 1 ref_mod 1: -117 [CAUSE] The above error is showing that there is a tree reference to a metadata extent that is no longer there. With "ref_verify" mount option (requires CONFIG_BTRFS_DEBUG), there is some extra debug output: BTRFS error (device dm-2): dumping block entry [180961280 16384], num_refs 0, metadata 1, from disk 0 BTRFS error (device dm-2): root entry 256, num_refs 18446744073709551615 BTRFS error (device dm-2): root entry 273, num_refs 18446744073709551615 BTRFS error (device dm-2): Ref action 3, root 273, ref_root 273, parent 0, owner 0, offset 0, num_refs 1 btrfs_force_cow_block+0x129/0x7d0 [btrfs] btrfs_cow_block+0x10a/0x250 [btrfs] btrfs_search_slot+0x5eb/0xf40 [btrfs] btrfs_insert_empty_items+0x3a/0x70 [btrfs] insert_with_overflow+0x53/0x130 [btrfs] btrfs_insert_dir_item+0x125/0x290 [btrfs] btrfs_add_link+0xaa/0x410 [btrfs] btrfs_rename+0x5ea/0xcd0 [btrfs] btrfs_rename2+0x28/0x60 [btrfs] vfs_rename+0x5b2/0xe10 filename_renameat2+0x244/0x430 __x64_sys_rename+0x48/0x70 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ---truncated--- | ||||
| CVE-2026-98051 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised next_index from intf->tx_spb_index on every iteration, so incr_ring() always produced the same result and only one slot was ever tested. Move the initialisation before the loop so each iteration advances next_index and the function correctly checks that cnt consecutive descriptor slots are available before allowing a new transmission. | ||||
| CVE-2026-97995 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio_console: do not free control-out buffers on remove __send_control_msg() publishes &portdev->cpkt as the control-out virtqueue cookie. remove_vqs() walks every virtqueue and passes leftover cookies to free_buf(), which treats them as struct port_buffer and reads sgpages. If a control message is still on c_ovq when the device is unbound, free_buf() reads past the ports_device object. KASAN reported slab-out-of-bounds in free_buf(): free_buf remove_vqs virtcons_remove unbind_store The object was the ports_device allocated in virtcons_probe(). Drain c_ovq without freeing. The packet lives in portdev and is released with it. | ||||
| CVE-2026-97994 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vhost/vdpa: reject VRING_NUM larger than device max vhost_vring_set_num() accepts any non-zero power-of-two queue size that fits in 16 bits. vhost-vdpa then passes that value to set_vq_num() without comparing it with get_vq_num_max(). A process with access to /dev/vhost-vdpa-* can therefore configure a queue larger than the device advertises. With vdpa_sim, the worker can walk descriptors beyond the mapped descriptor ring. KASAN reports a 16-byte out-of-bounds read, corresponding to one vring_desc, in the vringh IOTLB path: BUG: KASAN: out-of-bounds in _copy_from_iter Read of size 16 copy_from_iotlb copydesc_iotlb vringh_getdesc_iotlb vdpasim_net_work Cache get_vq_num_max() immediately after reset. Some backends derive it from writable queue-size state, so querying it after SET_NUM may return the current size instead of the device capability. Invalidate the cached value before reset so a failed reset leaves SET_NUM disabled. For VHOST_SET_VRING_NUM, copy the complete vring state once and use the same index and size for validation, vq->num, and set_vq_num(). This ensures that validation and use operate on the same copied values. | ||||
| CVE-2026-97954 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: fix tcp stream corruption with large pages rds_message_map_pages() assigns PAGE_SIZE bytes to every scatterlist entry, even when total_len ends in a partial page. The RDS congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE greater than 8192 the scatterlist maps bytes beyond the end of the congestion map. RDS-TCP transmits the SG contents according to those lengths, so the extra bytes become part of the TCP RDS stream and are interpreted as subsequent RDS message headers, corrupting the stream. Limit the final scatterlist mapping to the number of bytes remaining. This has no effect on systems with a 4K page size and allows RDS-TCP to be used on systems with 16K and larger page sizes. The RDS selftest, which previously hung on 16K pages, now passes. | ||||
| CVE-2026-97936 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from the histogram stacktrace modifier parse_field() sets HIST_FIELD_FL_STACKTRACE from the ".stacktrace" modifier before it looks the field name up, and nothing afterwards checks that the name resolved to a field which holds a stacktrace. create_hist_field() picks HIST_FIELD_FN_STACK on the strength of the field pointer alone, which reads a __data_loc word from the record and follows its low 16 bits as an offset into the same record. event_hist_trigger() takes the first word there as an entry count and copies that many longs into a 31 entry array: n_entries = *stack; memcpy(entries, ++stack, n_entries * sizeof(unsigned long)); Neither end of that copy is bounded, and the count is whatever the event holds at the offset, so any field will do: # cd /sys/kernel/tracing/events/sched/sched_process_fork # echo 'hist:keys=parent_pid.stacktrace' > trigger # (true) BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:rb_insert_color+0x18/0x130 timerqueue_linked_add+0x7e/0xd0 enqueue_hrtimer+0x39/0xb0 __hrtimer_run_queues+0x10f/0x1f0 </IRQ> RIP: 0010:memcpy+0xc/0x30 event_hist_trigger+0x165/0x690 The timer interrupt landed on the rbtree the copy had already run over. No debug options are needed for this; KASAN reports the same write as an out-of-bounds read of 13835058055416381440 bytes. Documentation/trace/histogram.rst already states the rule, "must be a long[] type", so enforce it once the name has been resolved. Names which resolve to no field at all, "hitcount.stacktrace" and the common_* pseudo-fields, are refused for the same reason: they hold no stacktrace to read. | ||||
| CVE-2026-97930 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf The in04_last array in struct usx2ydev is declared as char[24], but in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes. In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization path): memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes past the end of the source object. Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct us428_ctls) and use it consistently for the in04_last array, the in04_buf allocation, the URB transfer length, and the comparison loop, replacing the bare 24 and 21 literals throughout. | ||||
| CVE-2026-97920 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Keep the entry count when the histogram stats allocation fails print_entries() uses n_entries both as the number of sort entries and as its own return value, so the -ENOMEM it stores when the stats allocation fails overwrites the count that the cleanup still needs: n_entries = tracing_map_sort_entries(map, ...); if (n_entries < 0) return n_entries; ... if (!stats) { n_entries = -ENOMEM; goto out; } ... out: tracing_map_destroy_sort_entries(sort_entries, n_entries); tracing_map_destroy_sort_entries() takes an unsigned int and loops up to it, so -ENOMEM arrives as 4294967284. It walks an array of at most map->max_elts pointers and calls destroy_sort_entry(), which dereferences and frees, on whatever lies past the end. Reading the hist file of a trigger with a .percent value, with that allocation forced to fail: BUG: KASAN: vmalloc-out-of-bounds in tracing_map_destroy_sort_entries+0xa0/0xb0 Read of size 8 at addr ffffc90000045000 by task init/1 tracing_map_destroy_sort_entries+0xa0/0xb0 hist_show+0x6f7/0x1df0 seq_read_iter+0x2b8/0x1190 vfs_read+0x176/0xa40 The buggy address belongs to a 4-page vmalloc region starting at ffffc90000041000 allocated at tracing_map_sort_entries+0x5c/0xd50 A few pages further the fault is fatal. The registers at the oops confirm the bound: the loop's end pointer less the array start, over the pointer size, is 4294967284. Return the error in a separate variable and leave n_entries holding the count, the way tracing_map_sort_entries() does on its own error path. The stats block is only entered for a value carrying .percent or .graph, which __create_val_field() has rejected since v6.3, so this cannot be reached in mainline as it stands. It becomes reachable again with "tracing: hist: let values keep the percent and graph modifiers", so it should be applied first. | ||||
| CVE-2026-97906 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction. | ||||
| CVE-2026-97596 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reject invalid states in connection template sync records IPVS sync receivers validate protocol states before creating or updating a connection. For connection templates, however, they only log states outside the template state range and still store the value in the connection. A template can be returned by ordinary connection lookup. TCP and SCTP then use the invalid state as an index into their transition tables. Reject invalid template states in both sync protocol versions before looking up or modifying a connection. The version 1 path handles both IPv4 and IPv6 records. | ||||
| CVE-2026-97577 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: reject AV1 frames exceeding the tile capacity rockchip_vpu981_av1_dec_set_tile_info() indexes the tile group entry array by tile1 * tile_cols + tile0, reading up to tile_cols * tile_rows entries, lays out one descriptor per tile in the AV1_MAX_TILES tile_info buffer, and programs the real tile_cols / tile_rows into the hardware. The tile group entry control is a dynamic array sized to the number of entries userspace submitted, independent of tile_cols / tile_rows, so a frame that claims more tiles than entries reads past the array. A frame that claims more than AV1_MAX_TILES tiles also leaves the hardware programmed for more tiles than the descriptor buffer holds. Reject both in prepare_run(): tile_cols * tile_rows must not exceed the submitted entry count or AV1_MAX_TILES. The entry count is read via v4l2_ctrl_find() (ctrl->elems). This mirrors the bound the mediatek AV1 decoder already enforces. | ||||
| CVE-2026-97576 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks. | ||||
| CVE-2026-97575 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate AV1 tile counts The stateless AV1 decoders use tile_info.tile_cols and tile_rows as loop bounds and as indices into the mi_*_starts[] and *_in_sbs_minus_1[] arrays, as the divisor for context_update_tile_id, and their product bounds the per-tile descriptor buffers, but std_validate_compound() does not bound these u8 fields. Reject a V4L2_CTRL_TYPE_AV1_FRAME whose tile_cols or tile_rows exceeds V4L2_AV1_MAX_TILE_COLS / _ROWS, or whose product exceeds V4L2_AV1_MAX_TILE_COUNT. A zero tile count is left to the consuming driver so the zero-initialised control that existing userspace submits is still accepted. | ||||
| CVE-2026-97560 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix one-byte OOB read in smb2_parse_native_symlink() When parsing a share-root relative native symlink, memcpy copies smb_target+1 (skipping the leading separator) but uses strlen(smb_target)+1 as the length, reading one byte past the allocated buffer. This fixes the following KASAN splat when accessing an SMB symlink with a target of '\a\b': BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0 Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1 CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N 7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996) Call Trace: <TASK> dump_stack_lvl+0x7b/0xa0 print_report+0xd0/0x630 kasan_report+0xe5/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 smb2_parse_native_symlink+0x4f5/0xca0 parse_reparse_point+0x68a/0x1530 reparse_info_to_fattr+0x752/0xa20 cifs_get_fattr+0x873/0x15b0 cifs_get_inode_info+0xc0/0x310 cifs_lookup+0x308/0xa70 __lookup_slow+0x122/0x2b0 lookup_slow+0x50/0x70 path_lookupat+0x525/0xaf0 filename_lookup+0x1f2/0x550 vfs_statx+0xd1/0x1a0 vfs_fstatat+0x65/0xc0 __do_sys_newfstatat+0x9a/0x120 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-97540 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: don't rely on id table pointer arithmetic The current code is broken when dynamic ID is involved; in such cases usb_device_id parameter of probe lives on the heap and the pointer arithmetic will get an index that is wildly out of bound. Instead of keeping a side table for additional information, use driver_info field of the usb_device_id. The dynamic ID parsing code needs to be updated for this; convert it to just write to the reserved entry for dynamic ID and remove the weird loop. | ||||