Export limit exceeded: 403931 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 403931 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (403931 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98276 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lock the socket in sock_gettstamp() sk->sk_flags must only be changed while holding the socket lock, because sock_set_flag() and sock_reset_flag() use non atomic operations (__set_bit() and __clear_bit()). sock_gettstamp() is one of the last places where a bit of sk->sk_flags is changed from a syscall without owning the socket lock, through sock_enable_timestamp(sk, SOCK_TIMESTAMP). sk_set_memalloc() and sk_clear_memalloc() also change sk->sk_flags without the socket lock, but their callers (nbd, iscsi_tcp, nvme-tcp, sunrpc, wireguard) need a careful audit, this will be addressed in a separate patch. Jungwoo Lee and Wongi Lee reported an UDP socket use-after-free caused by this bug: a SIOCGSTAMPNS_NEW ioctl racing with bind() can cancel the SOCK_RCU_FREE bit that udp_lib_get_port() just set, because both threads perform a read-modify-write on the same word. CPU 0 (bind) CPU 1 (SIOCGSTAMPNS_NEW) -------------------------------- ---------------------------- read sk_flags = F read sk_flags = F compute F | BIT(SOCK_RCU_FREE) compute F | BIT(SOCK_TIMESTAMP) store F | BIT(SOCK_RCU_FREE) sk_add_node_rcu(sk, ...) store F | BIT(SOCK_TIMESTAMP) After the lost update, SOCK_RCU_FREE is clear while the socket is visible to lockless UDP receive lookups. sk_destruct() then frees the socket immediately instead of waiting for a RCU grace period, while the receive path still holds a reference-less pointer to it: BUG: KASAN: slab-use-after-free in ipv4_pktinfo_prepare+0x30/0x410 Read of size 8 at addr ffff888008806610 by task exploit/207 CPU: 0 UID: 1000 PID: 207 Comm: exploit Not tainted 6.12.95+ #1 ipv4_pktinfo_prepare+0x30/0x410 udp_queue_rcv_one_skb+0x51c/0x1180 udp_unicast_rcv_skb+0x109/0x350 ip_protocol_deliver_rcu+0x14b/0x310 ip_local_deliver_finish+0x29d/0x390 ip_local_deliver+0x24d/0x2a0 Only grab the socket lock when SOCK_TIMESTAMP has to be set, to keep the common case lockless. | ||||
| CVE-2026-98359 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentionally returns a referenced net_device even when it is unregistering, so matching and cleanup callers can still find the association. The reference keeps struct net_device allocated, but does not guarantee that the device remains operational. ib_get_eth_speed() uses the returned device operationally by invoking its ethtool callback. Although that call is made under RTNL, the function does not verify the registration state first. An asynchronous RDMA port query can therefore call into a netdev after NETDEV_UNREGISTER and ndo_uninit have completed. Check for NETREG_REGISTERED while holding RTNL and return -ENODEV for a device which is being unregistered. Keeping RTNL across the check and the ethtool operation prevents unregister from starting between them. Keep the speed fallback and warning under RTNL as well, so the warning can safely read netdev->name. Drop the netdev reference before releasing RTNL once all accesses to the device are complete. | ||||
| CVE-2026-93536 | 2026-10-07 | 5.3 Medium | ||
| A flaw was found in the X.Org Server. When a window is removed during an active gesture, the server fails to clean up references to the destroyed window in its gesture tracking data. A local attacker can exploit this flaw to cause a use-after-free condition—where the system accesses memory after it has been released—potentially leading to unauthorized information disclosure or a denial of service (DoS). | ||||
| CVE-2026-93524 | 2026-10-07 | 3.3 Low | ||
| A flaw was found in xorg-x11-server. An authenticated local user can trigger an out-of-bounds heap memory read by sending specially crafted X Keyboard Extension (XKB) requests with inconsistent key range parameters. This flaw leads to information disclosure, allowing the user to read sensitive data from the server's heap memory. | ||||
| CVE-2026-93523 | 2026-10-07 | 7.8 High | ||
| A flaw was found in xorg-x11-server. A local authenticated client can exploit this flaw by sending a crafted input device ungrab request with an unvalidated modifier value. This lack of validation causes the server to perform an out-of-bounds write on the heap, resulting in memory corruption that can lead to a denial of service (DoS) or potential arbitrary code execution. | ||||
| CVE-2026-93521 | 2026-10-07 | 7.8 High | ||
| A flaw was found in xorg-x11-server. The X server incorrectly calculates buffer sizes and memory offsets when prepending or appending data to RandR (Resize and Rotate extension) provider properties. A local attacker can exploit this vulnerability by sending specially crafted property update requests, causing memory corruption. This flaw could allow an attacker to escalate privileges or cause a denial of service (DoS) by crashing the X server. | ||||
| CVE-2026-93520 | 2026-10-07 | 7.8 High | ||
| A flaw was found in xorg-x11-server. In the X Keyboard Extension (XKB), key name memory is allocated with an insufficient buffer size compared to the maximum supported range. An authenticated local client can exploit this flaw by sending requests that modify the keycode range, triggering a heap-based buffer overflow. This vulnerability can lead to arbitrary code execution or cause a Denial of Service (DoS) by crashing the X server. | ||||
| CVE-2026-93515 | 2026-10-07 | 6.1 Medium | ||
| A flaw was found in xorg-x11-server. A use-after-free vulnerability, where the application accesses memory after it has already been released, occurs in the Present extension because window notification entries are not properly unlinked before cleaning up window resources. An authenticated local X client can exploit this flaw by creating cross-window notifications and subsequently destroying the target window. Successful exploitation primarily results in a Denial of Service (DoS) via an X server crash, and may potentially lead to information disclosure. | ||||
| CVE-2026-88812 | 2026-10-07 | 7.8 High | ||
| A flaw was found in the X.Org X Server and XWayland. An error handling issue in the X Keyboard Extension (XKB) geometry processing fails to clear a memory pointer after an allocation failure, leading to a double-free condition during cleanup. A local user can exploit this vulnerability by sending a specially crafted request to the display server. This can cause memory corruption, potentially resulting in a Denial of Service (DoS) or arbitrary code execution with elevated privileges. | ||||
| CVE-2026-93518 | 2026-10-07 | 7.8 High | ||
| A flaw was found in xorg-x11-server. Due to an integer truncation issue during memory allocation calculations within the X Keyboard Extension (XKB), the server allocates an undersized buffer when resizing key types. An authenticated local client can exploit this vulnerability by sending specially crafted XKB requests, causing a heap-based buffer overflow. This can result in arbitrary code execution or a denial of service (DoS). | ||||
| CVE-2026-93517 | 2026-10-07 | 7.8 High | ||
| A flaw was found in xorg-x11-server. The GLX (OpenGL Extension to the X Window System) interface fails to verify that incoming data sizes do not exceed allocated buffer limits when handling large rendering requests. An authenticated local client can exploit this vulnerability by sending a specially crafted request, triggering a heap-based buffer overflow. Successful exploitation can result in arbitrary code execution with the privileges of the X server or cause a Denial of Service (DoS) by crashing the application. | ||||
| CVE-2026-93519 | 2026-10-07 | 7.8 High | ||
| A flaw was found in xorg-x11-server. The server writes pointer barrier events into a fixed-size buffer without properly validating boundaries. An authenticated client can trigger this issue by configuring excessive pointer barriers and generating cursor motion events, causing a buffer overflow. This vulnerability may lead to arbitrary code execution or cause the server to crash, resulting in a Denial of Service (DoS). | ||||
| CVE-2026-98239 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware. | ||||
| CVE-2026-98241 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm: use full sockets in local error paths xfrm6_local_rxpmtu() and xfrm6_local_error() dereference skb->sk as if it always pointed at a full IPv6 socket. That is not guaranteed. TCP SYN-ACK skbs can be owned by a TCP_NEW_SYN_RECV request_sock while the output path itself is driven by the full listener. If rerouting selects an IPv6 XFRM tunnel route with a lower MTU, the local PMTU/error handling path can reach these callbacks with that mini-socket still attached to the skb. The callbacks then miscast the request socket as a full inet/IPv6 socket and can read beyond the request_sock allocation when they access inet_sock or ipv6_pinfo state. Resolve the owner with skb_to_full_sk() in both callbacks and bail out when no full socket is attached. This matches the surrounding XFRM IPv6 PMTU/error logic, which already reasons about full sockets with skb_to_full_sk(). | ||||
| CVE-2026-98339 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't filter by BSS type when removing stale entries When an assoc AP switches to a channel that already has a BSS entry, cfg80211_update_assoc_bss_entry() removes that entry before rehashing the real one, since the two would otherwise collide in the BSS rbtree. The lookup for that entry also required it to match the connection's BSS type, so an entry advertising e.g. the IBSS capability bit was left in place, and the following cfg80211_rehash_bss() then ran into it: WARN_ON(!cmp) Changing the type shouldn't really happen, but can be triggered by a rogue AP/device, so drop the check and remove any entries matching the comparison. | ||||
| CVE-2026-98357 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: wait for deferred control PDU completions before releasing the connection isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work item then runs isert_completion_put() -> isert_put_cmd(), which reads isert_conn->conn and takes conn->cmd_lock. Nothing orders that work item against teardown. isert_wait_conn() queues isert_release_work, which frees isert_conn, and iscsit_close_connection() frees the iscsit_conn right after it returns, so the queued work can run against freed memory. Count the deferred control PDU completions per connection and let isert_wait_conn() wait for them before the release work is queued. ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs iscsit_logout_post_handler(), which ends up waiting for conn->conn_wait_comp, and that completion is only sent by iscsit_close_connection() after it has called iscsit_wait_conn(). Waiting for it here would deadlock. Its wait stays the existing isert_wait4logout(). The splat below is from a kernel with tracing printk()s and an msleep(200) injected into isert_do_control_comp() to widen the window: BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620 Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182 CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy) Tainted: [B]=BAD_PAGE Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: isert_comp_wq isert_do_control_comp Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x3e/0x70 ? isert_put_cmd+0x53d/0x620 kasan_report+0xce/0x100 ? isert_put_cmd+0x53d/0x620 isert_put_cmd+0x53d/0x620 ? isert_completion_put+0x305/0x330 ? isert_do_control_comp+0x2ef/0x310 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 48: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x158/0x370 isert_cma_handler+0x1e3/0x2ae0 cma_cm_event_handler+0x3e/0x240 cma_ib_req_handler+0x17d9/0x4490 cm_process_work+0x41/0x330 cm_work_handler+0x5727/0xc160 process_one_work+0x633/0x1030 worker_thread+0x45b/0xd10 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 Freed by task 184: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x121/0x380 iscsit_close_connection+0x7cf/0x1e60 iscsit_take_action_for_connection_exit+0x1b6/0x360 iscsi_target_tx_thread+0x472/0x690 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-98341 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't free driver-owned scan requests When an interface goes down while a scan is running, cfg80211 completes the scan towards userspace and frees the scan request. However, the driver can be convinced that it owns the request, since the cancellation is (intended to be) asynchronous. The WARN_ON() in the netdev notifier was meant to catch this, but it's not actually avoidable, so it triggers and we get a UAF in scan_done(). There doesn't seem to be a great way around it, so just track that the driver is still convinced it owns the request, and then just free it on completion if it was already cancelled. Also remove the warnings since they can trigger in the intended architecture. | ||||
| CVE-2026-106452 | 1 Yawkat | 1 Lz4-java | 2026-10-07 | 5.3 Medium |
| yawkat LZ4 Java provides LZ4 compression for Java. Prior to 1.11.2, net.jpountz.lz4.LZ4BlockInputStream refill() validates that the compressedLen field in a legacy LZ4Block header is nonnegative but allocates a compressed-input buffer of that attacker-controlled size before reading payload data, allowing a header-only stream to request a near-2 GiB allocation and exhaust the JVM heap. Canonical writers emit raw blocks when compression is not smaller than the original block, but vulnerable readers accept non-canonical oversized compressed blocks. This issue is fixed in version 1.11.2. | ||||
| CVE-2026-106356 | 1 Google | 1 Chrome | 2026-10-07 | 5.4 Medium |
| Clickjacking in EVP in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-106345 | 1 Google | 1 Chrome | 2026-10-07 | 4.2 Medium |
| Use of released resource in Session in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to spoof UI elements via a crafted HTML page. (Chromium security severity: Low) | ||||