Export limit exceeded: 14839 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14839 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93785 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cifs: validate idmap key payload length The cifs.idmap key type stores its payload length in key->datalen, which is limited to U16_MAX. Accepting a larger key payload truncates the recorded length and can make later users interpret the payload using inconsistent bounds. Reject oversized preparsed payloads before allocating or copying them. This keeps key->datalen consistent with the stored data for both inline and separately allocated idmap payloads. | ||||
| CVE-2026-93231 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lockd: fix swapped arguments in nlmsvc_match_ip() When releasing locks by server IP address via /proc/fs/nfsd/unlock_ip, nlmsvc_unlock_all_by_ip() calls nlm_traverse_files() with the server sockaddr as the opaque @data argument: nlm_traverse_files(server_addr, nlmsvc_match_ip, NULL); The match callback is later invoked from nlm_traverse_locks() as: match(lockhost, host); where the first argument is the nlm_host that owns the lock, and the second argument is the @data that was originally passed down (here the server sockaddr). This is the convention every other match callback relies on (nlmsvc_mark_host(), nlmsvc_same_host(), nlmsvc_is_client()): arg1 is the real nlm_host, arg2 is the caller-supplied reference value. nlmsvc_match_ip() has had these two arguments reversed ever since the unlock-by-IP feature was introduced in commit 4373ea84c84d ("lockd: unlock lockd locks associated with a given server ip"): return rpc_cmp_addr(nlm_srcaddr(host), datap); Here @host is actually the server sockaddr, so nlm_srcaddr(host) dereferences a struct sockaddr as a struct nlm_host and reads garbage at the offset of h_srcaddr; meanwhile @datap is actually the lock owner's nlm_host but is compared as a sockaddr. As a result the comparison practically never matches and locks are not released for the requested IP. Swap the arguments so the lock owner's source address is compared against the requested server address: return rpc_cmp_addr(nlm_srcaddr(datap), (struct sockaddr *)host); [ cel: fix the misleading typedef parameter names too ] | ||||
| CVE-2026-93199 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Do not treat master device as a duplicate target i3c_master_search_i3c_dev_duplicate() searches the bus for another I3C device with the same PID as the reference device. The search can match master->this, causing the controller itself to be returned as a duplicate. Since the controller is not a target device, it cannot be a duplicate of one. Exclude master->this from matching so that the function only returns real duplicate target devices. | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89832 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage. | ||||
| CVE-2026-89827 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: avoid force-completing uninitialized UVD rings uvd_v7_0_sw_init() does not initialize the UVD decode ring for an SR-IOV VF. However, amdgpu_uvd_resume() unconditionally force-completes the decode ring when restoring its fence sequence. Skip fence completion when the fence driver is not initialized. | ||||
| CVE-2026-89796 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: avoid infinite kdamond_merge_regions() internal loop Patch series "mm/damon: unurgent fixes for infinite loop, NULL de-ref and races", v1.1. Sashiko found a few issues in DAMON that could cause infinite loop, NULL dereference and monitoring results degradation. The first two sounds scary but the infinite loop happens only under unreasonable user setup. The NULL dereference is only in a unit test. Monitoring results degradation is trivial since it is only best-effort, and those happens from only unlikely races. Still those are bugs that better to fix if possible. Fix those. This patch (of 6): Due to online parameter update like events, the number of DAMON regions could be higher than the user-set upper limit. kdamond_merge_regions() repeats merge regions until the number meets the limit, while doubling the merge threshold up to the theoretical maximum threshold. It is tried only up to the theoretical maximum threshold because even the aggressive merging can fail from reducing the number of regions under the user-defined upper limit. For example, there could be many user-defined non-contiguous regions that cannot be merged. The threshold based loop break condition is evaluated by comparing the threshold for the next merging try against the theoretical maximum threshold. If max_thres is larger than UINT_MAX / 2, doubling the threshold could make it overflow, and bypass the loop break condition. In the case, if the number of regions cannot be reduced under the upper limit like explained above, the loop will run infinitely. Prevent the case by doing the break condition check before doubling the threshold. Also, prevent the threshold exceeding the maximum threshold, as it could overflow and apply the wrong merge threshold. This issue is unlikely to occur in real world, since having the max_thres higher than UINT_MAX / 2 require unrealistically large aggregation intervals compared to the sampling interval. Also, it requires an unrealistically large number of uncontiguous regions setup. Nonetheless, the consequence is bad and the fix is simple. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-80861 | 1 Linux | 1 Linux Kernel | 2026-10-03 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal. | ||||
| CVE-2026-74294 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: aiu: Validate written enum values The AIU HDMI and internal codec mux put callbacks use the written enum value with snd_soc_enum_item_to_val() before checking whether the value is valid for the enumeration. Reject out-of-range values before converting the enum item, matching the validation already done by the G12A HDMI and internal codec mux controls. | ||||
| CVE-2026-68289 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream() In tipc_recvmsg(), the copy length is computed as: copy = min_t(int, dlen - offset, buflen); buflen is size_t but min_t(int, ...) casts it to int. When buflen exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it wraps negative, wins the comparison, and the negative copy length propagates to simple_copy_to_iter() where int-to-size_t promotion makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the same pattern. Kernel panic - not syncing: kernel: panic_on_warn set ... RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521) Call Trace: __skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402) skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534) tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934) io_recvmsg+0x47e/0xda0 Fix by changing min_t(int, ...) to min_t(size_t, ...) in both functions. The result is always <= (dlen - offset), which is bounded by TIPC maximum message size (0x1ffff bytes), so the implicit narrowing on assignment to int copy is always safe. | ||||
| CVE-2026-68155 | 1 Linux | 1 Linux Kernel | 2026-10-03 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Reject monmaps advertising zero monitors A message of type CEPH_MSG_MON_MAP contains a monmap that is sent from a monitor to the client. This monmap contains information about the existing monitors in the cluster. Currently, a monmap indicating that there are zero monitors in the cluster is treated as valid. However, it is impossible to have zero monitors in the cluster and still receive a valid monmap from a monitor. Therefore, such a monmap must be corrupted and should be treated as invalid. Furthermore, a monmap with a monitor count of zero can subsequently crash the client when attempting to open a session with a monitor in __open_session(). This happens because the "BUG_ON(monc->monmap->num_mon < 1)" assertion in pick_new_mon() is triggered. This patch extends a check in ceph_monmap_decode() to also reject arriving mon_maps with num_mon == 0 rather than only with num_mon > CEPH_MAX_MON. [ idryomov: drop "log output for unusual values of num_mon" part ] | ||||
| CVE-2026-71892 | 2026-10-03 | N/A | ||
| In Bouncy Castle for Java before 1.86, the opt-in key-size validation on CMS key-transport recipients, org.bouncycastle.cms.jcajce.JceKeyTransRecipient.setKeySizeValidation(true), never ran for a message using RFC 9709 content-encryption key derivation (id-alg-cek-hkdf-sha256). The branch that should have selected the actual content-encryption algorithm carried in the key derivation AlgorithmIdentifier's parameters compared the encrypted-key byte array against the id-alg-cek-hkdf-sha256 object identifier, a comparison between a byte array and an ASN1ObjectIdentifier that is false for every possible input, so the check fell through to a key-size lookup on the outer wrapper OID. That OID identifies a key-derivation construction rather than a cipher and has no registered key size, so the size comparison was skipped entirely. A key-transport EnvelopedData or AuthEnvelopedData whose transported, HKDF-derived content-encryption key did not match the key size of the advertised content-encryption algorithm was therefore accepted even with validation explicitly enabled, silently defeating the only mechanism the API offers for enforcing recovered key size. The recipient now dispatches on the content-encryption AlgorithmIdentifier's algorithm OID, so validation checks the recovered key against the inner content-encryption algorithm. Messages with a matching key size, non-HKDF messages, and recipients that do not enable validation are unaffected. This issue also affects Bouncy Castle for Java FIPS (BC-FJA) before bcpkix-fips 2.0.13 (2.0.X series) and 2.1.13 (2.1.X series). | ||||
| CVE-2026-103514 | 2026-10-03 | N/A | ||
| The WP 2FA WordPress plugin before 4.1.0 does not invalidate a time-based one-time passcode once it has been used, allowing an attacker who knows an account's password and has observed a valid code within its validity window to replay it and bypass two-factor authentication, including on administrator accounts. | ||||
| CVE-2026-11399 | 2026-10-03 | 4.3 Medium | ||
| The Helpdesk Support Ticket System for WooCommerce plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.1.6 via the 'id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary ticket responses belonging to other users by supplying any stsw_responses row ID to the deletion handler after obtaining the nonce from the admin footer. | ||||
| CVE-2026-83663 | 1 Apache | 1 Thrift | 2026-10-03 | 7.5 High |
| Uncontrolled Recursion vulnerability in Apache Thrift go bindings. Both Go transports satisfy a read out of a buffered frame and, when that frame yields no payload bytes, read the next frame and call `Read` again instead of looping. A peer produces such a frame for 4 bytes in `TFramedTransport` (a declared size of zero) or 18 bytes in `THeaderTransport` (a header block that fills the frame), so nothing bounds the depth. The Go stack limit is reached as a `fatal error`, which `recover()` cannot catch, so the whole process dies. This issue affects Apache Thrift: before 0.25.0. Users are recommended to upgrade to version 0.25.0, which fixes the issue. | ||||
| CVE-2026-105083 | 1 Imagemagick | 1 Imagemagick | 2026-10-03 | 3.9 Low |
| ImageMagick before 7.1.2-32 and 6.9.13-57 contains a policy bypass vulnerability in LoadPolicyCache that silently skips security policy rules when policy.xml uses an alternate DOCTYPE. A valid DOCTYPE not ending in ']>' makes the parser consume the rest of the file, so no policy rules are applied and restricted operations become allowed. | ||||
| CVE-2026-105029 | 1 Uvdesk | 1 Community-skeleton | 2026-10-02 | 4.3 Medium |
| UVdesk support-center-bundle before 1.1.3.3 contains an insecure direct object reference vulnerability in the rateTicket action of Controller/Ticket.php that allows authenticated customers to rate other customers' tickets. Attackers can supply arbitrary ticket IDs, which are loaded without an ownership check, to submit or change satisfaction ratings on tickets owned by other customers. | ||||
| CVE-2026-97212 | 2026-10-02 | 7.3 High | ||
| The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests. | ||||
| CVE-2026-104444 | 1 Yeswiki | 1 Yeswiki | 2026-10-02 | 7.1 High |
| YesWiki before 4.6.7 contains an authorization bypass vulnerability in the comments API editComment route that allows authenticated low-privilege users to overwrite arbitrary pages or comments by supplying their own page as the pagetag field. Attackers can send a POST request to the api/comments endpoint targeting a victim tag, bypassing per-page write ACLs to replace content and reparent existing pages or comments. | ||||
| CVE-2026-98164 | 1 Linux | 1 Linux Kernel | 2026-10-02 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Check write tracking in all address spaces kvm_gfn_is_write_tracked() checks only the supplied memslot, but page tracking is per-address-space and shadow pages are shared across all address spaces. With SMM, a GFN can therefore be write-tracked in one address space and appear untracked through the other. Check the supplied slot first, then the slot for the other address space. This ensures all callers honor write tracking regardless of the active address space. In particular, it prevents mmu_try_to_unsync_pages() from marking an upper-level shadow page unsync and eventually triggering the BUG in pte_list_remove(). [invert direction of the conditional. - Paolo] | ||||