Export limit exceeded: 426261 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (426261 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-126957 | 1 Zephyrproject-rtos | 1 Zephyr | 2026-11-13 | 5.3 Medium |
| An integer underflow in Zephyr's IPv4 option handling allows a remote, unauthenticated attacker to read stack memory. When replying to an ICMP Echo Request that carries an IPv4 Record Route or Timestamp option, icmpv4_update_record_route() and icmpv4_update_time_stamp() in subsys/net/ip/icmpv4.c compute the length of the already recorded data as ptr - ptr_offset in uint8_t arithmetic. The attacker-controlled Pointer field is checked against the option length but not against the RFC 791 minimum (4 for Record Route, 5 for Timestamp), so a smaller value wraps the length to up to 252 bytes. net_pkt_write() then reads past the 40-byte opt_data stack buffer and up to 213 bytes of stack memory, which can include stack and heap pointers, are returned in the ICMP Echo Reply. A single packet triggers the leak and the device does not crash, so it can be repeated. Devices built with CONFIG_NET_IPV4_HDR_OPTIONS, which CONFIG_NET_IPV4_IGMP selects, are affected. | ||||
| CVE-2026-108564 | 1 Revive | 1 Adserver | 2026-11-13 | N/A |
| A reflected cross-site scripting vulnerability in the invocation-tag generation interface of Revive Adserver 6.0.8 and earlier allows an unauthenticated attacker to execute JavaScript in an authenticated user's browser by persuading them to visit a crafted URL. When Direct Selection is enabled, an attacker-controlled banner identifier can be included in HTML form fields without appropriate encoding. Direct Selection is disabled by default. The issue is fixed in Revive Adserver 6.0.9 by HTML-encoding banner identifier values in the invocation-option form fields. | ||||
| CVE-2026-108565 | 1 Revive | 1 Adserver | 2026-11-13 | N/A |
| A reflected cross-site scripting vulnerability in the popup invocation options of Revive Adserver 6.0.8 and earlier allows an unauthenticated attacker to execute JavaScript in an authenticated user's browser by persuading them to visit a crafted URL. The top, left, timeout and delay request parameters are included in HTML attributes without appropriate encoding. Exploitation requires an existing popup zone, which can be created through the administrator API but is not offered by the normal zone-creation interface. The issue is fixed in Revive Adserver 6.0.9 by HTML-encoding the affected popup option values. | ||||
| CVE-2026-110041 | 1 Wordpress-extensions | 1 Crop-thumbnails | 2026-11-13 | 3.8 Low |
| The Crop Thumbnails WordPress plugin before 1.10.0 does not perform object-level authorization when reading and re-cropping media attachments, allowing any authenticated user with the upload capability (the Author role by default) to read the metadata of, and overwrite the generated thumbnail files and stored metadata of, media attachments belonging to other users. | ||||
| CVE-2026-127286 | 1 Zackriya-solutions | 1 Meetily | 2026-11-13 | 7.3 High |
| A vulnerability was identified in Zackriya-Solutions Meetily up to 0.4.1. Affected is an unknown function of the file backend/app/main.py. The manipulation leads to missing authentication. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The legacy backend was not removed yet. Vulnerable code is still present on main. The vendor explains: "[W]e are moving towards a single unified application using the tauri framework, and we deprecated the client-server architecture of this application." | ||||
| CVE-2026-110072 | 1 Wordpress-extensions | 1 Photo Gallery By 10web | 2026-11-13 | 6.8 Medium |
| The Photo Gallery by 10Web WordPress plugin before 1.8.49 does not escape a shortcode attribute that sets a gallery watermark image before rendering it into an HTML image attribute, and decodes percent-encoded characters in the value, allowing users with Contributor-level access and above to perform Stored Cross-Site Scripting that executes in the browser of any user, including an administrator, who views the published gallery. | ||||
| CVE-2026-110959 | 1 Wordpress-extensions | 1 Descope | 2026-11-13 | 9.8 Critical |
| The Descope WordPress plugin before 1.2.0 does not validate the authentication token it receives before creating a WordPress session, accepting any non-empty token, so an unauthenticated attacker can obtain a session for any existing account, including an administrator, by supplying that account's email address. | ||||
| CVE-2026-0455 | 2026-11-13 | N/A | ||
| The Versalâ„¢ AI Edge Series Gen 2 Peripheral Protection Unit (XPPU) for the inter-processor interrupt (IPI) buffers does not block unauthorized access as expected. This allows processors in the SoC with any IPI channel access the ability to both read and write to the entire IPI buffer register space as well as the IPI no-buffer register control space. | ||||
| CVE-2026-0436 | 2026-11-13 | N/A | ||
| Insufficient parameter sanitization in the AMD Secure Processor (ASP) trusted execution environment (TEE) SPDM driver could allow an attacker to supply malicious input, potentially resulting in loss of platform integrity, memory leakage, or denial of service. | ||||
| CVE-2026-0101 | 1 Amd | 2 Epyc 9005 Series Processors, Epyc Embedded 9005 Series Processors | 2026-11-13 | N/A |
| Improper validation of specified quantities in input within AMD Power Management Firmware (PMFW) could allow a local attacker to pass unsanitized input, potentially resulting in a system crash or denial of service. | ||||
| CVE-2026-0004 | 2026-11-13 | N/A | ||
| A transient execution vulnerability in some AMD processors may allow an attacker with the ability to execute code on the system to infer data in the L1D cache, potentially resulting in the leakage of sensitive information across privileged boundaries. | ||||
| CVE-2024-36344 | 2026-11-13 | N/A | ||
| Insufficient parameter sanitization in AMD Secure Processor (ASP) TEE DrvSys could allow an attacker with local access to the Trusted Execution Environment (TEE) interface or Trusted Application (TA) to cause an out-of-bounds write, potentially resulting in a loss of platform integrity or denial of service. | ||||
| CVE-2024-21963 | 2026-11-13 | N/A | ||
| An out-of-bounds read vulnerability in the IOMMU could allow a malicious guest to corrupt hypervisor (HV) pages and potentially cause a host crash leading to loss of availability. | ||||
| CVE-2024-21954 | 1 Amd | 4 Epyc 7003 Series Processors, Epyc 9004 Series Processors, Epyc Embedded 7003 Series Processors and 1 more | 2026-11-13 | N/A |
| Improper exception handling in IOMMU could allow an invalidate command to be sent to PCIe devices that do not support Address Translation Cache (ATC), potentially resulting in denial of service. | ||||
| CVE-2026-107372 | 1 Auth0 | 1 Auth0 Ai Js | 2026-11-13 | N/A |
| The auth0-ai-js FGA retriever does not distinguish between authorization checks under different conditions when filtering documents during retrieval-augmented generation, resulting in documents denied by Auth0 FGA being included in the model context and used in the generated response. | ||||
| CVE-2026-108561 | 1 Revive | 1 Adserver | 2026-11-13 | N/A |
| A stored cross-site scripting vulnerability in the report date-selection controls of Revive Adserver 6.0.8 and earlier allows an unauthenticated attacker to execute JavaScript in a victim's browser by persuading them to follow a crafted report URL and complete normal reauthentication. An attacker-controlled period_preset value can be saved in the victim's session and inserted into JavaScript without appropriate encoding. The payload can execute on the initial report view and subsequent report views using the stored defaults. The issue is fixed in Revive Adserver 6.0.9 by applying JSON encoding appropriate for the JavaScript context to date-selection values. | ||||
| CVE-2026-108559 | 1 Revive | 1 Adserver | 2026-11-13 | N/A |
| A reflected cross-site scripting vulnerability in the iframe invocation options of Revive Adserver 6.0.8 and earlier allows an unauthenticated attacker to execute JavaScript in an authenticated user's browser by persuading them to visit a crafted URL. When generating invocation tags for an any-size zone, the frame_width and frame_height request parameters are included in HTML attributes without appropriate encoding. The issue is fixed in Revive Adserver 6.0.9 by HTML-encoding the affected values in the invocation-option form fields. | ||||
| CVE-2026-107662 | 1 Revive | 1 Adserver | 2026-11-13 | N/A |
| Blind SQL injection in Revive Adserver 6.0.8 and earlier allows an authenticated manager restricted to one agency to extract arbitrary database values through the banner-zone.php and campaign-zone.php administration pages. Permission checks and database queries obtain identifiers through inconsistent request-input precedence, allowing an authorized numeric identifier to pass validation while a different, attacker-controlled value reaches an SQL query. Extracted data can include password hashes and active session identifiers. Reusing an unexpired administrator session can grant administrative access, allowing modification of configuration and disruption of ad delivery. The issue is fixed in Revive Adserver 6.0.9 by consistently selecting POST values before GET values in both global input registration and common input helpers, and excluding cookies from these helpers. Both commits e301dbbb7 and 0aa9d0124 are required for the complete correction. | ||||
| CVE-2026-108558 | 1 Revive | 1 Adserver | 2026-11-13 | N/A |
| A reflected cross-site scripting vulnerability in the conversion-statistics pages of Revive Adserver 6.0.8 and earlier allows an unauthenticated attacker to execute JavaScript in an authenticated user's browser by persuading them to visit a crafted URL. An incorrect ownership check validates the advertiser identifier instead of the supplied website identifier, allowing malicious website input to reach HTML output without appropriate encoding. A related output issue affects the hour parameter. The issue is fixed in Revive Adserver 6.0.9 by validating the correct website identifier and normalising the hour parameter before formatting. | ||||
| CVE-2026-108563 | 1 Revive | 1 Adserver | 2026-11-13 | N/A |
| Spreadsheet formula injection in conversion-tracking report exports in Revive Adserver 6.0.8 and earlier allows an unauthenticated attacker to submit conversion values that are written as formulas instead of text in an XLS workbook. When a user opens the exported report in a spreadsheet application, attacker-supplied formulas can be evaluated. The confirmed impact is formula execution within the workbook; disclosure of information to the attacker has not been established. The issue is fixed in Revive Adserver 6.0.9 by sanitising conversion values before writing them to the affected XLS report sections. | ||||