Export limit exceeded: 402067 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402067 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98247 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_codec: validate vendor codec count length The Read Local Supported Codecs parsers consume the variable-sized standard codec array before parsing the vendor codec count. Although the initial reply-size check includes a vendor count byte in the fixed layout, it does not guarantee that the byte remains after the standard codec array. If a controller reply ends immediately after that array, calculating the vendor codec array size reads vnd_codecs->num beyond the skb data. Use skb_pull_data() to validate and consume each codec header before using its count in both command variants. | ||||
| CVE-2026-98246 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Serialize local codec list cleanup hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock. Codec list additions and both traversals in sco_sock_getsockopt() use that lock, but the close path does not. A close and BT_CODEC query can therefore interleave as follows: hci_dev_close_sync() sco_sock_getsockopt() hci_dev_lock() fetch codec entry hci_codec_list_clear() kfree(entry) read entry->id The reader then accesses an entry which the close path has freed. KASAN BUG: KASAN: slab-use-after-free in sco_sock_getsockopt+0xfa0/0xfe0 Read of size 1 at addr ffff8881001c3450 Call Trace: sco_sock_getsockopt+0xfa0/0xfe0 do_sock_getsockopt+0x537/0x7b0 __sys_getsockopt+0xf2/0x170 Allocated by task 92: hci_codec_list_add.isra.0+0x2c/0x440 hci_read_codec_capabilities+0x224/0x590 hci_read_supported_codecs+0x2c2/0x640 Freed by task 92: kfree+0x131/0x3c0 hci_codec_list_clear+0xd8/0x160 hci_dev_close_sync+0x92a/0xfa0 Take hdev->lock around the clear operation at its existing point in the close path. This makes the clear wait for active readers and prevents a new traversal until the list is empty without changing teardown ordering. | ||||
| CVE-2026-98243 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3 The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference" changed the check to test for the ops pointer instead of the signaled bit to avoid a potential NULL dereference when the ops pointer has been cleared. The problem is now that the ops pointer is cleared only when neither the release nor the wait callback is implemented and this isn't true for a lot of dma_fence implementations yet. So those implementations lost the RCU protection after signaling of the returned string resulting in potential use after free. Add the signaling check additional to the ops pointer check so that we have both the protection against NULL dereference as well as the RCU protection after signaling for the returned string. v2: improve comments to note RCU protection and explain why we check both signaling state and ops pointer v3: some comment improvements suggested by Philip | ||||
| CVE-2026-98242 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: Fix silent overflow for phys vec to sgt In case MMIO size is bigger than 4G and peer2peer DMA goes through host bridge, we trigger a code path that assigns the total linked IOVA (which is greater than 4G) to mapped_len. Previously, `mapped_len` was declared as 32-bit `unsigned int`. When accumulating `size_t` lengths, this leads to a silent wrap-around. This truncation causes truncated lengths to be passed to functions like `fill_sg_entry()`. Fix this by changing `mapped_len` to `size_t` (64-bit). While at it, fix similar potential overflow issues in `calc_sg_nents` by using `check_add_overflow()` for `nents` and using `unsigned int` for the loop iterator in `fill_sg_entry` to match. | ||||
| CVE-2026-98239 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware. | ||||
| CVE-2026-98232 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Validate MODE SENSE lengths in scsi_cdl_enable() scsi_cdl_enable() uses length fields returned by MODE SENSE to locate the ATA feature mode page in a 64-byte stack buffer. A target can report a total length shorter than its mode header and block descriptors. The unsigned subtraction used for the MODE SELECT length can wrap, and the separately computed buf_data can point beyond buf. During automatic scan, enable is false, so the read-modify-write of buf_data[4] can clear the low two bits of a target-selected out-of-bounds stack byte. scsi_mode_select() can then copy up to 64 bytes from outside the buffer into the outgoing MODE SELECT payload, disclosing stack contents to the target. This is reachable while scanning a USB storage device that identifies as an ATA device and advertises CDL support. No filesystem mount or userspace access to the block device is required. On upstream commit cee9395acd80 ("Linux 7.3-rc1"), a build-specific, one-vCPU QEMU/Raw Gadget proof using QEMU-only multi-UDC allocator sampling executed a fixed proof command inside the guest and created a UID-0-owned marker during automatic enumeration, with KASLR and NX enabled. The issue was independently found during security research at Drivesec S.r.l. Cap the available length to the buffer size. Validate and consume the mode header and block descriptor lengths before using the page, and require the five bytes needed to access the CDL field. | ||||
| CVE-2026-98226 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm, swap: fix SWAP_USAGE_OFFLIST_BIT collision with real usage count SWAP_USAGE_OFFLIST_BIT is embedded in the si->inuse_pages usage counter, and is meant to sit above any value that counter can reach. However, it is defined from BITS_PER_TYPE(atomic_t), so it is bit 30. On a system with 4 KiB pages the flag collides with the usage count once that count reaches 4 TiB. swap_usage_in_pages() masks bit 30 out, so whenever the real count has that bit set, every caller of it reads 4 TiB low: * /proc/swaps understates Used by 4 TiB. * A raw count of exactly 2^30 masks to zero, so try_to_unuse() takes its "if (!swap_usage_in_pages(si)) goto success;" early exit and swapoff tears the device down while pages are still swapped out. Nothing in the rest of swapoff aborts the teardown, so those pages are lost. Independently of swapoff, the collision also corrupts the counter and the plist. On a device in normal use, a free that leaves bit 30 set in the count makes swap_usage_sub() see the flag where there is only count, and call add_to_avail_list(). It clears the bit with fetch_and(~SWAP_USAGE_OFFLIST_BIT), leaving the stored count 4 TiB below the real one, and calls plist_add() on a device that is already listed, tripping the WARN_ON(!plist_node_empty(node)) in plist_add() and linking the node a second time. Change the definition of SWAP_USAGE_OFFLIST_BIT to be based on atomic_long_t instead. Note that the usage counter field itself is of this same type, so it is still a valid bit. | ||||
| CVE-2026-98225 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/shrinker: fix bogus set_shrinker_bit() with cgroup.memory=nokmem With cgroup.memory=nokmem, shrinker_memcg_alloc() bails out early and never allocates an id, so shrinker->id keeps the 0 it got from the kzalloc() in shrinker_alloc(). __list_lru_init() then copies that 0 into lru->shrinker_id, where it looks like a valid bit index. Nothing calls expand_shrinker_info() on nokmem either, so shrinker_nr_max stays 0 and every memcg ends up with an empty map (map_nr_max == 0). deferred_split_folio() hands a real memcg to __list_lru_add() regardless of whether the lru is memcg aware, so the first THP queued in a cgroup does set_shrinker_bit(memcg, nid, 0) and trips the bounds check: WARNING: mm/shrinker.c:212 at set_shrinker_bit+0x7d/0x90, CPU#126 Call Trace: <TASK> deferred_split_folio+0x18c/0x220 map_anon_folio_pmd_nopf+0xdd/0x130 map_anon_folio_pmd_pf+0x14/0xb0 do_huge_pmd_anonymous_page+0x1a1/0x620 __handle_mm_fault+0xea9/0x10d0 handle_mm_fault+0xe5/0x320 do_user_addr_fault+0x1cc/0x870 exc_page_fault+0x81/0x1b0 asm_exc_page_fault+0x27/0x30 </TASK> Harmless, the WARN_ON_ONCE() is what keeps the out of bounds unit[] read from happening, but the id should not look valid in the first place. Clear it before returning. Two other spots could paper over this: drop the id in __list_lru_init() when nokmem turns memcg_aware off, or make deferred_split_folio() pass NULL like list_lru_add_obj() does. Both leave shrinker->id lying around for the next caller, so fix it where the id is handed out. | ||||
| CVE-2026-98224 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/vma: correctly unaccount on mmap_prepare() failure __mmap_setup() accounts memory for relevant mappings via: security_vm_enough_memory_mm() -> __vm_enough_memory() -> vm_acct_memory() If __mmap_setup() fails, this indicates that this accounting did not take place, and thus it's appropriate for __mmap_region() to jump to abort_munmap. However if call_mmap_prepare() fails, it also jumps there and any accounted memory is not correctly unaccounted. Fix this by handling each error separately. | ||||
| CVE-2026-98222 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: encrypted: fix integer overflow of datablob_len encrypted_key_alloc() stores datablob_len in a u16. It is computed from multiple string and payload lengths. If the result exceeds U16_MAX, the assignment truncates the allocation size. KASAN reports a 32760-byte slab-out-of-bounds write when __ekey_init() copies the master key description into the undersized buffer. The total payload length stored in key->datalen is also a u16. Use check_add_overflow() to reject values that do not fit either destination, and use kzalloc_flex() for the flexible-array allocation. | ||||
| CVE-2026-98221 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KEYS: trusted: Fix tpm2_load_cmd() boundary check tpm2_load_cmd() does boundary checks against the ASN.1 size i.e., payload->blob_len. Address this by passing the decoded blob size to tpm2_load_cmd(), and use it for the boundary checks. | ||||
| CVE-2026-98219 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Close the pre-enable ops error claim window scx_alloc_and_add_sched() publishes ops->priv before scx_root_enable_workfn() switches the state to SCX_ENABLING. An error claimed via scx_bpf_error_bstr() from an associated BPF program in that window is consumed by scx_disable_workfn(), which takes the pre-enable shortcut in scx_root_disable(). The shortcut returns without any teardown and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg racing the enable workfn's own transition. The enable then completes with the claim consumed: the scheduler stays up but can never be disabled again, and bpf_scx_unreg() frees it while still in use, resulting in a use-after-free. Both WARN_ON_ONCE()s fire back to back: WARNING: kernel/sched/ext/ext.c:7522 at scx_root_enable_workfn+0xeec/0x1be0, CPU#3: scx_enable_help/276 WARNING: kernel/sched/ext/ext.c:6398 at scx_root_disable+0xb50/0xdb8, CPU#0: sched_ext_helpe/664 scx_root_enable_workfn() switches to SCX_ENABLING before the scheduler allocation, so ops->priv is never visible while SCX_DISABLED. The allocation failure path restores SCX_DISABLED. | ||||
| CVE-2026-98218 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: atr: fix dangling adapter pointer on add failure i2c_atr_add_adapter() stores atr->adapter[chan_id] before i2c_add_adapter() so that the I2C bus notifier can match child clients during registration. On failure the channel is freed but the slot was left pointing at freed memory, which can lead to use-after-free in i2c_atr_del_adapter() / cleanup and also block reuse with -EEXIST. Clear the slot on the i2c_add_adapter() error path before freeing chan. | ||||
| CVE-2026-98216 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Fix the PIO_CRED credit-return mmap hfi1_file_mmap()'s PIO_CRED case must hand user space the single credit-return page that holds this context's entry. That page is the second or third page of the per-node credit-return allocation once the hardware send context index reaches 64 or 128, so the failure below is intermittent: when the entry lands on the first page the offset is zero and everything works. Two things are wrong. First, cr_page_offset is a byte offset but .va is a struct credit_return *, so adding it is pointer arithmetic and scales the offset by sizeof(struct credit_return) == 64. memvirt then lands 256 KiB or 512 KiB past a 10240-byte allocation. With an IOMMU translating, that address is inside the vmalloc range but in no vm_area, so dma_mmap_coherent() -> iommu_dma_mmap() finds no pages, vmalloc_to_pfn() returns page_to_pfn(NULL), and remap_pfn_range() installs a frame above MAXPHYADDR. The first user read then takes: psm2_ep_open_pr: Corrupted page table at address 7a14d007e000 PGD 800000013886a067 P4D 800000013886a067 PUD 13886b067 PMD 13886c067 PTE 800049168e911235 Oops: Bad pagetable: 000d [#1] SMP PTI Second, and still wrong once the arithmetic is corrected, dma_mmap_coherent() describes a whole coherent buffer and selects the page within it with vma->vm_pgoff. Offsetting cpu_addr has no effect: for a vmap'd allocation iommu_dma_mmap() uses cpu_addr only to locate the vm_area and then maps pages[vm_pgoff], which hfi1_file_mmap() has just set to 0. User space therefore always receives the first credit-return page, every credit read is for the wrong context, and send PIO stalls forever. Use the DMA API as intended: pass the base of the allocation with its full length and select the page with vm_pgoff. A separate length is needed because memlen must keep describing the VMA for the existing size check. The dma-direct path stays correct as well, since dma_direct_mmap() adds the same vm_pgoff to the base pfn. Tested on a Dell T7610 (Xeon E5-2650 v2, Intel IOMMU in DMA-FQ mode) against a Threadripper PRO 3995WX peer, both Omni-Path 100. Before this change psm2_ep_open() Oopses the kernel; with only the arithmetic corrected psm2_ep_open() succeeds but any transfer that uses send PIO hangs, PSM2_SDMA=2 (send PIO disabled) completing normally while PSM2_SDMA=0 (send PIO only) hangs every time. With this change send PIO, send DMA and the default mixed mode all work. | ||||
| CVE-2026-98215 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: preserve user SID across nested backing files SELinux saves the user file SID in a backing-file security blob so it remains available after mmap() replaces vma->vm_file with a backing file. For nested backing files (overlayfs over overlayfs, or FUSE passthrough backed by overlayfs), user_file may itself be a backing file. Its fsec->sid is the SID of the mounter that opened it, rather than the user that opened the top-level file. mprotect() then checks fd { use } against the mounter SID. This can incorrectly deny access without a domain transition, or check the wrong target SID after one. Copy the saved user SID when user_file is a backing file. Keep using the regular file SID for the first backing layer. With two nested overlayfs mounts and SELinux enforcing, mprotect(PROT_READ) returns EACCES with an fd { use } denial against the mounter SID. With this change, mprotect() succeeds. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy. The original test was also repeated with Fedora Cloud Base 44 userspace and gave the same result. | ||||
| CVE-2026-98214 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: recheck intermediate backing files on mprotect() mprotect() can be used to bypass the SELinux checks that mmap() performs against the intermediate layers of a stacked filesystem. mmap() checks every backing layer as the request descends through the stack. mprotect() only has the lowest backing file in vma->vm_file, so it rechecks the top-level user and the lowest mounter, but skips the mounters of every layer in between. With two nested overlayfs mounts and a policy denying mounter_t -> middle_file_t:file { execute }, a direct mmap(PROT_EXEC) is denied: avc: denied { execute } for pid=71 comm="nested_exec" path="/payload" dev="overlay" ino=9 scontext=user_u:base_r:mounter_t tcontext=user_u:object_r:middle_file_t tclass=file permissive=0 while mmap(PROT_NONE) followed by mprotect(PROT_EXEC) succeeds. Preserve each intermediate path, mounter SID and file-description SID in the backing-file security blob, copying the saved entries when another backing layer is opened. Allocate the array only for nested backing files, and release it and the path references in the backing_file_free hook. During mprotect(), recheck fd { use } and the requested inode permissions for every saved mounter, and include the intermediate layers in the execmod checks. Policy for nested stacking may then need to grant intermediate mounters what a direct mmap() already requires, and execmod on intermediate labels for binaries using text relocations. Tested on arm64 QEMU with a small BusyBox initramfs and a purpose-built SELinux policy, on a mainline tree containing commit f2381b546e7e ("fs: fix user path of nested backing files"). [PM: subject tweak] | ||||
| CVE-2026-98212 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: hsq: Fix use-after-free in retry work mmc_hsq_pump_requests() queues retry_work when request_atomic() returns -EBUSY; today sdhci-sprd is the only consumer that implements request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but is never cancelled during driver removal. Work still pending at unbind can therefore run after the devm allocation has been released and dereference hsq->mmc and hsq->mrq. Use devm_work_autocancel() to cancel and drain retry_work before the devm allocation is released. By the time devres cleanup begins, mmc_remove_host() has already stopped the host, so no new requests can arm the work. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98211 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mmci: Fix use-after-free in busy-timeout work ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b command, but mmci_remove() never cancels it. The work can subsequently dereference the devm-allocated mmci_host after it has been released. Mask the controller interrupts and disable the delayed work during removal. This drains any queued instance and stops an IRQ handler that is still in progress from queueing the work again once it has been disabled. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98210 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: mxcmmc: cancel data work and watchdog on remove mxcmci_remove() frees the host through the devm tail, but neither it nor mmc_remove_host() drains the driver's own asynchronous state. host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(), is deleted only by the DMA- and IRQ-complete paths, which the remove path does not explicitly drain; it can therefore fire after the host is freed and dereference it in mxcmci_watchdog(). host->datawork, armed from the IRQ handler on the PIO path, is not cancelled by the remove path either. Free the devm-registered IRQ, then cancel datawork and delete the watchdog in mxcmci_remove(), before dma_release_channel(). Freeing the IRQ first keeps a trailing handler from re-arming datawork between the cancel and the host free. Both callbacks are non-self-rearming. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-98209 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-of-aspeed: Remove children before releasing SDC resources Probe failure and removal leave SDHCI child devices registered after the parent clock and managed resources are released. Unregister the OF children in reverse order before disabling the parent clock on both paths. Use of_platform_device_destroy() because manual child creation does not set the flag required by of_platform_depopulate(). This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||